View TX-S_1329932.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TESTING
SMALL POLARIZED RELAY WITH HIGH SENSITIVITY 50mW
7.4 .291 8.2 .323 15 .591 7.4 .291 8.4 .331
TX-S RELAYS
Outstanding surge resistance Surge withstand between open contacts: 1,500V 10x160s (FCC part 68) Surge withstand between contacts and coil: 2,500V 2x10s (Bellcore)
15 .591
FEATURES
High sensitivity * 50mW nominal operating power (single side stable 1.5-12V) * Useful for electric-power-saving Approx. 0.3V low thermal electromotive force
mm inch
SA type
SPECIFICATIONS
Contact
Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A ) Contact material Nominal switching capacity (resistive load) Max. switching power (resistive load) Rating Max. switching voltage Max. switching current Min. switching capacity 1 Single side stable Nominal operating power 1 coil latching 2 coil latching Expected life Mechanical (at 180 cpm) (min. opera- Electrical 1 A 30 V DC tions) (at 20 cpm) resistive Note:
1This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.
Characteristics
2 Form C 100 m Gold-clad silver alloy 1 A 30 V DC 30 W (DC) 110 V DC 1A 10 A 10 mV DC 50 mW (1.5 to 12 V DC) 70 mW (24 V DC) 35 mW (1.5 to 12 V DC) 50 mW (24 V DC) 70 mW (1.5 to 12 V DC) 150 mW (24 V DC) 5x107 2x105 Initial insulation resistance*1 Between open contacts Initial breakdown Between contact sets voltage*2 Between contacts and coil Between open contacts Initial surge (10 x 160s) voltage Between contacts and coil (2 x 10 s) Operate time [Set time]*3 (at 20C)(at nominal voltage) Release time (without diode) [Reset time]*3 (at 20C)(at nominal voltage) Temperature rise*4 (at 20C) Functional*5 Shock resistance Destructive*6 Functional*7 Vibration resistance Destructive Conditions for operation, Ambient transport and storage*8 temperature (Not freezing and condensing Humidity at low temperature) Unit weight Min. 1,000 MW (at 500 V DC) 750 Vrms for 1min. 1,000 Vrms for 1min. 1,800 Vrms for 1min. 1,500V (FCC Part 68) 2,500V (Bellcore) Max. 5 ms (Approx. 3 ms) [Max. 5 ms (Approx. 3 ms)] Max. 5 ms (Approx. 1.5 ms) [Max. 5 ms (Approx. 3 ms)] Max. 50C Min. 750 m/s2 {75 G} Min. 1,000 m/s2 {100 G} 10 to 55 Hz at double amplitude of 3.3 mm 10 to 55 Hz at double amplitude of 5 mm -40C to +70C -40F to +158F 5 to 85% R.H. Approx. 2 g .071 oz
Remarks
* Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Initial breakdown voltage" section. *2 Detection current: 10mA *3 Excluding contact bounce time. *4 By resistive method; nominal voltage applied to the coil; contact carrying current: 1 A. *5 Half-wave pulse of sine wave: 6 ms; detection time: 10 s
*6 Half-wave pulse of sine wave: 6 ms *7 Detection time: 10 s *8 Refer to 4. Conditions for operation, transport and storage mentioned in Cautions for use in catalog.
TYPICAL APPLICATIONS
* Telephone equipment * Measuring equipment * Communications equipment * Office Automation equipment
ORDERING INFORMATION
Ex. TXS Contact arrangement 2: 2 Form C Surface-mount availability Nil: Standard PC board terminal type or Nil: self-clinching terminal type SA: Standard surface-mount terminal type SL : High connection reliability surface-mount SL : terminal type SS: Space saving surface-mount terminal type 2 SA
-
L
-
H
-
3V
-
Z Packing style Nil: Tube packing Z: Tape and reel packing(piked from the 8/9/10/12 -pin side
Operating function Terminal shape Nil: Single side Nil: stable L: 1 coil latching L2: 2 coil latching
Coil voltage (DC)
Nil: Standard PC 1.5, 3, 4.5, 6, 9, board terminal or 12, 24 V surface-mount terminal H: Self-clinching terminal
Notes: 1. Tape and reel (picked from 1/3/4/5-pin side) is also available by request. Part number suffix "-X" is needed when ordering. (ex.) TXS2SA-3 V-X 2. Tape and reel packing symbol "-Z" or "-X" are not marked on the relay.
1
TX-S
TYPES AND COIL DATA (at 20C 68F)
1) Standard PC board terminal type and self-clinching terminal type Single side stable
Part No. Standard PC board terminal TXS2-1.5V TXS2-3V TXS2-4.5V TXS2-6V TXS2-9V TXS2-12V TXS2-24V Self-clinching terminal TXS2-H-1.5V TXS2-H-3V TXS2-H-4.5V TXS2-H-6V TXS2-H-9V TXS2-H-12V TXS2-H-24V Nominal voltage, V DC 1.5 3 4.5 6 9 12 24 Pick-up voltage, V DC (max.) 1.2 2.4 3.6 4.8 7.2 9.6 19.2 Drop-out voltage, V DC (min.) 0.15 0.3 0.45 0.6 0.9 1.2 2.4 Nominal operating current, mA (10%) 33.3 16.7 11.1 8.3 5.6 4.2 2.9 Coil resistance, (10%) 45 180 405 720 1,620 2,880 8,229 Nominal operating power, mW 50 50 50 50 50 50 70 Max. Allowable voltage, V DC 2.2 4.5 6.7 9 13.5 18 36
1 coil latching
Part No. Standard PC board terminal TXS2-L-1.5V TXS2-L-3V TXS2-L-4.5V TXS2-L-6V TXS2-L-9V TXS2-L-12V TXS2-L-24V Self-clinching terminal TXS2-L-H-1.5V TXS2-L-H-3V TXS2-L-H-4.5V TXS2-L-H-6V TXS2-L-H-9V TXS2-L-H-12V TXS2-L-H-24V Nominal voltage, V DC 1.5 3 4.5 6 9 12 24 Set voltage, V DC (max.) 1.2 2.4 3.6 4.8 7.2 9.6 19.2 Reset voltage, V DC (Max.) 1.2 2.4 3.6 4.8 7.2 9.6 19.2 Nominal operating current, mA (10%) 23.3 11.7 7.8 5.8 3.9 2.9 2.1 Coil resistance, (10%) 64.3 257 579 1,029 2,314 4,114 11,520 Nominal operating power, mW 35 35 35 35 35 35 50 Max. Allowable voltage, V DC 2.2 4.5 6.7 9 13.5 18 36
2 coil latching
Part No. Standard PC board terminal TXS2-L2-1.5V TXS2-L2-3V TXS2-L2-4.5V TXS2-L2-6V TXS2-L2-9V TXS2-L2-12V TXS2-L2-24V Notes:
1. Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Self-clinching terminal TXS2-L2-H-1.5V TXS2-L2-H-3V TXS2-L2-H-4.5V TXS2-L2-H-6V TXS2-L2-H-9V TXS2-L2-H-12V TXS2-L2-H-24V
Nominal voltage, V DC 1.5 3 4.5 6 9 12 24
Set voltage, V DC (max.) 1.2 2.4 3.6 4.8 7.2 9.6 19.2
Reset voltage, V DC (Max.) 1.2 2.4 3.6 4.8 7.2 9.6 19.2
Nominal operating current, mA (10%) 46.7 23.3 15.6 11.7 7.8 5.8 6.3
Coil resistance, (10%) 32.1 129 289 514 1,157 2,057 3,840
Nominal operating power, mW 70 70 70 70 70 70 150
Max. Allowable voltage, V DC 2.2 4.5 6.7 9 13.5 18 36
2) Surface-mount terminal type Single side stable
Part No. TXS2S-1.5 V TXS2S-3 V TXS2S-4.5 V TXS2S-6 V TXS2S-9 V TXS2S-12 V TXS2S-24 V Nominal voltage, V DC 1.5 3 4.5 6 9 12 24 Pick-up voltage, V DC (max.) 1.2 2.4 3.6 4.8 7.2 9.6 19.2 Drop-out voltage, V DC (min.) 0.15 0.3 0.45 0.6 0.9 1.2 2.4 Nominal operating current, mA (10%) 33.3 16.7 11.1 8.3 5.6 4.2 2.9 Coil resistance, (10%) 45 180 405 720 1,620 2,880 8,229 Nominal operating power, mW 50 50 50 50 50 50 70 Max. Allowable voltage, V DC 2.2 4.5 6.7 9 13.5 18 36
2
TX-S
1 coil latching
Part No. TXS2S-L-1.5 V TXS2S-L-3 V TXS2S-L-4.5 V TXS2S-L-6 V TXS2S-L-9 V TXS2S-L-12 V TXS2S-L-24 V Nominal voltage, V DC 1.5 3 4.5 6 9 12 24 Set voltage, V DC (max.) 1.2 2.4 3.6 4.8 7.2 9.6 19.2 Reset voltage, V DC (max.) 1.2 2.4 3.6 4.8 7.2 9.6 19.2 Nominal operating current, mA (10%) 23.3 11.7 7.8 5.8 3.9 2.9 2.1 Coil resistance, (10%) 64.3 257 579 1,029 2,314 4,114 11,520 Nominal operating power, mW 35 35 35 35 35 35 50 Max. Allowable voltage, V DC 2.2 4.5 6.7 9 13.5 18 36
2 coil latching
Part No. TXS2S-L2-1.5 V TXS2S-L2-3 V TXS2S-L2-4.5 V TXS2S-L2-6 V TXS2S-L2-9 V TXS2S-L2-12 V TXS2S-L2-24 V Nominal voltage, V DC 1.5 3 4.5 6 9 12 24 Set voltage, V DC (max.) 1.2 2.4 3.6 4.8 7.2 9.6 19.2 Reset voltage, V DC (max.) 1.2 2.4 3.6 4.8 7.2 9.6 19.2 Nominal operating current, mA (10%) 46.7 23.3 15.6 11.7 7.8 5.8 6.3 Coil resistance, (10%) 32.1 129 289 514 1,157 2,057 3,840 Nominal operating power, mW 70 70 70 70 70 70 150 Max. Allowable voltage, V DC 2.2 4.5 6.7 9 13.5 18 36
: For each surface-mounted terminal variation, input the following letter. SA type: A, SL type: L, SS type: S
Notes:
1. Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse. 2. Standard packing: Tube: 40 pcs. ; Case: 1,000 pcs. 3. Tape and reel packing is also available for surface-mount type by request. Part number suffix "-X" or "-Z" is needed when ordering. In this case, "X" or "Z" are not marked on the relay. Quantity in tape and reel: 500 pcs. * TXS2SA-L-3V-Z (ex.) * TXS2SA-3V-X Picked from the 1/3/4/5-pin side Picked from the 8/9/10/12-pin side
DIMENSIONS
1. Single side stable and 1 coil latching type Standard PC board terminal
15 .591 0.65 8.2 .026 .323 3.5 .138 5.08 .200 2.54 .100 5.08 .200 0.25 .010 8-1.0 dia 8-.039 dia
mm inch
PC board pattern (Copper-side view)
7.4 .291 10.16 .400
Schematic (Bottom view) Single side stable 1 coil latching (Deenergized condition) (Reset condition)
2.54 .100
+
5.08 .200
1
345
- +
1
345
-
0.5 .020 1.15 .045
12
10 9 8
12
10 9 8
Direction indication*
Dirrection indication*
Tolerance: 0.1 .004
*Orientation stripe located on top of relay.
Self clinching terminal
15 .591 0.65 8.2 .026 .323 3.5 .138 5.08 .200 2.54 .100
7.4 .291
0.5 .020 1.15 .045
5.08 .200
0.25 .010
General tolerance: 0.3 .012
3
TX-S
Surface-mount terminal SA type
mm inch Suggested mounting pad (Top view)
15 .591 8.2 .323 0.5 .020 5.08 .200 0.65 2.54 .026 .100 8.4 .331 5.08 .200 0.25 9.40.5 .010 .370.020 7.4 .291 3.16 .124 1 5.08 .039 .200 2.54 .100 1.6 .0.63 7.24 .285 0.3 .012
Schematic (Top view) Single side stable 1 coil latching (Deenergized condition) (Reset condition)
- +
12
10 9 8
+ -
12
10 9 8
1
345
1
345
Direction indication
15 .591 For glue-pad
Direction indication
SL type
15 .591 8.2 .323 0.5 .020 5.08 .200 0.65 2.54 .026 .100 Max. 10.0 .390
7.4 .291
1 5.08 .039 .200 3.16 .124
2.54 .100
5.08 0.25 .200 9.40.5 .010 .370.020
7.24 .285
SS type
15 .591 8.2 .323 0.5 .020 5.08 .200 0.65 2.54 .026 .100 Max. 10.0 .390
7.4 .291
1 5.08 .039 .200 2.16 .085
2.54 .100
5.08 .200 7.40.5 .291.020
0.25 .010
6.24 .246
General tolerance: 0.3 .012
Tolerance: 0.1 .004
2. Coil latching type Standard PC board terminal
PC board pattern (Copper side view)
15 .591 0.65 8.2 .026 .323 3.5 .138 5.08 .200 2.54 .100 5.08 .200 0.25 .010 10-1.0 dia 10-.039 dia 7.4 .291 12.7 .500
Schematic (Bottom view) 2 coil latching (Reset condition)
1 3456
2.54 .100
+
5.08 .200
- -
10 9 8 7
+
12
0.5 .020 1.15 .045
Direction indication*
Tolerance: 0.1 .004
Self clinching terminal
15 .591 0.65 8.2 .026 .323 3.5 .138 5.08 .200 2.54 .100
7.4 .291
0.5 .020 1.15 .045
5.08 .200
0.25 .010
General tolerance: 0.3 .012
Surface-mount terminal SA type
15 .591 8.2 .323 0.5 .020 5.08 .200 0.65 2.54 .026 .100 8.4 .331 5.08 .200 0.25 9.40.5 .010 .370.020
Suggested mounting pad (Top view)
7.4 .291 3.16 .124 1 5.08 .039 .200 2.54 .100 1.6 .0.63 7.24 .285 0.3 .012
Schematic (Top view) 1 coil latching (Reset condition)
12 10 9 8 7
+ +
1 3 45
- -
6
15 .591
For glue-pad
Direction indication
SL type
15 .591 8.2 .323 0.5 .020 5.08 .200 0.65 2.54 .026 .100 Max. 10.0 .390
7.4 .291
1 5.08 .039 .200 3.16 .124
2.54 .100
5.08 0.25 .200 9.40.5 .010 .370.020
7.24 .285
SS type
15 .591 8.2 .323 0.5 .020 0.65 2.54 .026 .100 Max. 10.0 .390
7.4 .291 2.16 .085 5.08 .200 7.40.5 .291.020
1 5.08 .039 .200
2.54 .100
6.24 .285 0.25 .010
5.08 .200
General tolerance: 0.3 .012
Tolerance: 0.1 .004
4
TX-S
REFERENCE DATA
1. Maximum switching capacity 2. Life curve 3. Mechanical life
Tested sample: TXS2-4.5V, 10 pcs. Operating frequency: 180 cpm
Ratio against the rated voltage, %V 100 90 80 70 60 50 40 30 20 10 30 100 200 Contact voltage, V 0 0.5 1.0 Switching current, A 0 10 100 1,000 5,000 No. of operations, x104 Drop-out voltage Max. Min. Pick-up voltage Max. Min.
No. of operations x104
DC resistive load Contact current, A 1.0
100
30V DC resistive load
0.5 0.4 0.3 0.2
10
4. Electrical life (1 A 30 V DC resistive load)
Tested sample: TXS2-4.5V, 6 pcs. Operating frequency: 20 cpm
5-(1). Coil temperature rise Change of contact resistance
100 Contact resistance, m 90 80 70 60 50 40 30 Min. Max. Temperature rise, C
Change of pick-up and drop-out voltage
Ratio against the reted voltage, %V 100 90 80 70 60 50 40 30 20 10 0 0 5 10 15
4
Tested sample: TXS2-4.5V, 6 pcs. Point measured: Inside the coil Ambient temperature: 25C 77F, 70C 158F
30 +25C +77F :x +70C +158F :x
Pick-up voltage
Max. Min.
20
10
Drop-out voltage
Max. Min.
20 10
1A 1A 0A 0A
20
0
0
5
10
15
4
20
0
90
100 110
120
130
140 150 160
No. of operations, x10
No. of operations, x10
Coil applied voltage, %V
5-(2). Coil temperature rise
Tested sample: TXS2-24V, 6 pcs. Point measured: Inside the coil Ambient temperature: 25C 77F, 70C 158F
30 Temperature rise, C +25C +77F :x +70C +158F :x
6-(1). Operate and release time (with diode)
Tested sample: TXS2-4.5V, 10 pcs.
6-(2). Operate and release time (without diode)
Tested sample: TXS2-4.5V, 10 pcs.
7 Operate and release time, ms Operate and release time, ms 6 5 4 3 2 1 Max. Min. Max. Min. Operate time Release time
7 6 5 4 3 2 1 0 Max. Min. Max. Min. Operate time Release time
20 1A 1A 0A 10 0A
0
90 100 110
120
130
140 150
160
0
80
Coil applied voltage, %V
100 90 110 120 Coil applied voltage, %V
80
90
100
110
120
Coil applied voltage, %V
7. Distribution of pick-up and drop-out voltage
Tested sample: TXS2-4.5V, 50 pcs.
50 45 40 Quantity 35 30 25 20 15 10 5 0 0 20 40 60 80 100 Ratio against the rated voltage, %V Pick-up voltage Drop-out voltage
8. Distribution of set and reset voltage
Tested sample: TXS2-4.5V 30 pcs.
20 Set voltage Reset voltage 15 Quantity
9. Ambient temperature characteristics
Tested sample: TXS2-4.5V 5 pcs.
Rate of change, %
30 20 10
Drop-out voltage
x x
Pick-up voltage 20 40 60 80 Ambient -10 temperature, C -20 -30
10
-40 -20
0
5
0
0
20
40
60
80
100
Ratio against the rated voltage, %V
5
TX-S
10. Distribution of contact resistance
Tested sample: TXS2-4.5V, 50 pcs. (50x4 contacts)
100 90 80 Quantity 70 Terminal No. 4-5, 8-9 60 50 40 30 20 10 0 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 Contact resistance, m 10 100 Frequency, MHz 1,000 50 0.6 0.4 0.2 10 100 Frequency, MHz 1,000
12 10 9 8
11-(1). High frequency characteristics
Tested sample: TXS2-4.5V, 2 pcs. Isolation characteristics
11-(2). High frequency characteristics
Tested sample: TXS2-4.5V, 2 pcs. Insertion loss characteristics
1
345
Terminal No. 3-4, 9-10
Isolation, dB
(BOTTOM VIEW)
100
Insertion loss, dB
Z Z' Y Y' X X'
1.0 0.8
12-(1). Malfunctional shock (single side stable)
Tested sample: TXS2-4.5V, 6 pcs.
Z Z' Y Y' X X'
12-(2). Malfunctional shock (latching)
Tested sample: TXS2-L2-4.5V, 6 pcs.
13. Thermal electromotive force
Tested sample: TXS2-4.5V, 10 pcs.
20 18 16 Quantity
Y 1000m/s2
Deenergized condition Energized condition
Y 1000m/s2
Reset state Set state
X 1000m/s2
Z 1000m/s2
X 1000m/s2
Z 1000m/s2
14 12 10 8 6 4
1000m/s2 Z' 1000m/s2 Y'
1000m/s2 X'
1000m/s Z'
2
1000m/s2 X' 1000m/s2 Y'
2 0 0 0.15 0.25 0.35 0.45 0.55
Thermal electromotive force, V
14-(1). Influence of adjacent mounting
Tested sample: TXS2-4.5V, 6 pcs.
Rate of change, % 15 ON 10 5 Pick-up voltage 0 Rate of change, % ON ON
14-(2). Influence of adjacent mounting
Tested sample: TXS2-4.5V, 6 pcs.
Rate of change, % 15 ON 10 5 Pick-up voltage 0 Drop-out voltage -5 OFF OFF 0 2 4 6 8 10 12 14 16 .079 .157 .236 .315 .394 .472 .551 .630 Inter-relay distance R, mm inch ON OFF ON
14-(3). Influence of adjacent mounting
Tested sample: TXS2-4.5V, 6 pcs.
Rate of change, % 15 ON 10 ON 5 0 Rate of change, % Drop-out voltage OFF -5 OFF OFF 0 OFF 2 4 6 8 10 12 14 16 .079 .157 .236 .315 .394 .472 .551 .630 Inter-relay distance R, mm inch Pick-up voltage ON ON
Drop-out voltage -5
OFF OFF
Rate of change, %
-10 OFF 0 2 4 6 8 10 12 14 16 .079 .157 .236 .315 .394 .472 .551 .630 Inter-relay distance R, mm inch -15
-10 -15
-10 -15
15. Pulse dialing test
Tested sample: TXS2-4.5V, 6 pcs. (35 mA 48V DC wire spring relay load)
Change of pick-up and drop-out voltage
Ratio against the rated voltage, %V 100 90 80 70 60 50 40 30 20 10 0 0 10 20 30 40
4
Change of contact resistance
100 Contact resistance, m 90 80 70 60 50 40 30 Max. Min. 20 10 Max. Min.
Pick-up voltage Max. Min.
0.08 F DC48V
+
458 0.08 F 4 3
Drop-out voltage
-
458 Wire spring relay
50
0
0
10
20
30
40
50
No. of operation, x10
No. of operation, x104
Note: Data of surface-mount type are the same as those of PC board terminal type.
For Cautions for Use, see Pages in catalog.
6

▲Up To Search▲

Price & Availability of TX-S

	To Download TX-S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .