View UGB10DCT_1331157.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
UGB10ACT THRU UGB10DCT
ULTRAFAST SOFT RECOVERY RECTIFIER
Reverse Voltage - 50 to 200 Volts Forward Current - 10.0 Amperes
TO-263AB
0.380 (9.65) 0.420 (10.67) 0.245 (6.22) MIN K 0.047 (1.19) 0.055 (1.40) 0.160 (4.06) 0.190 (4.83) 0.045 (1.14) 0.055 (1.40)
FEATURES
Plastic package has Underwriters Laboratories Flammability Classification 94V-0 Ideally suited for free wheeling diode power factor correction applications Soft recovery characteristics Excellent high temperature switching Optimized to reduce switching losses High temperature soldering in accordance with CECC 802 / Reflow guaranteed Glass passivated chip junction
0.320 (8.13) 0.360 (9.14) 1 K 2 0.575 (14.60) 0.625 (15.88)
SEATING PLATE
-T-
0.090 (2.29) 0.110 (2.79) 0.018 (0.46) 0.025 (0.64) 0.027 (0.686) 0.037 (0.940) 0.080 (2.03) 0.110 (2.79)
0.095 (2.41) 0.100 (2.54)
MECHANICAL DATA
Case: JEDEC TO-263AB molded plastic body Terminals: Plated leads, solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Mounting Torque: 5 in. - lbs. max. Weight: 0.08 ounce, 2.24 grams
PIN 1 K - HEATSINK PIN 2
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25C ambient temperature unless otherwise specified.
SYMBOLS UGB10ACT UGB10BCT UGB10CCT UGB10DCT UNITS
Maximum repetitive peak reverse voltage Working peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TC=100C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) per leg Maximum instantaneous forward voltage per leg at IF=10A, IF=5A, IF=5A, Maximum reverse leakage current per leg at working peak reverse voltage Maximum reverse recovery time per leg at IF=1.0A, di/dt=100A/s, VR=30V, Irr=0.1 IRM Maximum reverse recovery time per leg at IF=0.5A, IR=1.0A, Irr=0.25A Maximum reverse recovery current per leg at IF=5A, di/dt=50A/s,VR=30V Maximum stored charge per leg IF=2A, di/dt=20A/s, VR=30V Irr=0.1 IRM Typical thermal resistance from junction to case per leg Operating junction and storage temperature range Maximum Typical Maximum Typical TJ=25C TJ=25C TJ=150C TJ=25C TJ=100C
VRRM VRWM VRMS VDC I(AV) IFSM
50 50 35 50
100 100 70 100 10 60 1.25 1.10 0.895 10 200 25 25 15 0.7 5.5 4.5 4.5
150 150 105 150
200 200 140 200
Volts Volts Volts Volts Amps Amps
VF
Volts A ns ns Amps nC C/W C
IR trr trr IRM Qrr RJC TJ, TSTG
-40 to +150
4/98
RATINGS AND CHARACTERISTIC CURVES UGB10ACT THRU UGB10DCT
FIG. 1 -FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG
15
10
PEAK FORWARD SURGE CURRENT, AMPERES
RESISTIVE OR INDUCTIVE LOAD
100
8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TC=105C
10
5
0
1 0 25 50 75 100 125 CASE TEMPERATURE, C 150
1
10 NUMBER OF CYCLES AT 60 HZ
100
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG
100
INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES
TJ=25C PULSE WIDTH=300s 1% DUTY CYCLE
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER LEG
1,000
TJ=125C
INSTANTANEOUS FORWARD CURRENT, AMPERES
10
TJ=125C TJ=100C
TJ=100C
100
1
10
TJ=25C
1
TJ=25C
0.1
0.1 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE VOLTAGE, %
INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - REVERSE SWITCHING CHARACTERISTICS PER LEG FIG. 6 - TYPICAL JUNCTION CAPACITANCE PER LEG
STORED CHARGE/REVERSE RECOVERY TIME, nC/ns
50
@2A, 20A/s
100
TJ=125C f=1.0 MHz Vsig=50MVp-p
40
CAPACITANCE, pF
trr Qrr @5A, 50A/s
30
@1A, 100A/s
10
20
@5A, 50A/s
10
@1A, 100A/s @2A, 20A/s
0 25
50 75 100 JUNCTION TEMPERATURE, C
125
1 0.1
1 10 REVERSE VOLTAGE, VOLTS
100

▲Up To Search▲

Price & Availability of UGB10DCT

	To Download UGB10DCT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .