View UMX5N_1331542.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EMX5 / UMX5N / IMX5
Transistors
High transition frequency (dual transistors)
EMX5 / UMX5N / IMX5
Features 1) Two 2SC3838K chips in a EMT or UMT or SMT package. 2) High transition frequency. (fT=3.2GHz) 3) Low output capacitance. (Cob=0.9pF)
External dimensions (Unit : mm)
EMX6
0.5 0.5 1.0 1.6
0.22
(4) (5) (6)
(3) (2)
1.2 1.6
(1)
0.13
Equivalent circuits
EMX5 / UMX5N
(3) (2) (1)
IMX5
(4) (5) (6)
ROHM : EMT6
Each lead has same dimensions
(4)
1.3 0.65
0.8 1.1 0.95 0.95 1.9 2.9
0.2
(6)
1.25 2.1
0.15
(1)
(4)
(5)
(6)
(3)
(2)
(1)
Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation
EMX5 / UMX5N
IMX5
Symbol VCBO VCEO VEBO IC Pc Tj Tstg
Limits 20 11 3 50 150(TOTAL) 300(TOTAL) 150 -55 to +150
Unit V V V mA mW
ROHM : UMT6 EIAJ : SC-88
IMX5
(6)
0~0.1
Absolute maximum ratings (Ta=25C)
0.1Min.
Each lead has same dimensions
(5)
Junction temperature Storage temperature
1 120mW per element must not be exceeded. 2 200mW per element must not be exceeded.
C C
0.15
(4)
1.6 2.8
0.3Min.
Package, marking, and packaging specifications
Type Package Marking Code
Basic ordering unit (pieces)
0~0.1
EMX5 EMT5 X5 T2R 8000
UMX5N UMT6 X5 TR 3000
IMX5 SMT6 X5 T108 3000
ROHM : SMT6 EIAJ : SC-74
Each lead has same dimensions
(3)
2
(2)
1
0.3
(1)
0.7
Rev.A
0.9
2.0
Tr1
(3)
Tr2
Tr2
Tr1
(5)
(2)
0.65
UMX5N
0.5
1/2
EMX5 / UMX5N / IMX5
Transistors
Electrical characteristics (Ta=25C)
Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current DC current transfer ratio Collector-emitter saturation voltage Transition frequency Output capacitance
Transition frequency of the device.
Symbol BVCBO BVCEO BVEBO ICBO IEBO hFE VCE(sat) fT Cob
Min. 20 11 3 - - 56 - 1.4 -
Typ. - - - - - - - 3.2 0.9
Max. - - - 0.5 0.5 120 0.5 - 1.55
Unit V V V A A - V GHz pF IC=10A IC=1mA IE=10A VCB=10V VEB=2V
Conditions
VCE/IC=10V/5mA IC/IB=10mA/5mA VCE/IE=10V/-10mA, f=500MHz VCB/f=10V/1MHz, IE=0A
Electrical characteristics curves
COLLECTOR SATURATION VOLTAGE : VCE(sat)(mV)
DC CURRENT TRANSFER RATIO : hFE
TRANSITION FREQUENCY : fT (GHz)
500
Ta=25C VCE=10V
500
Ta=25C
5.0
Ta=25C VCE=10V
200 100
200 100
2.0 1.0
50
50
Ic/IB=10
0.5
20 10 0.1 0.2
20
Ic/IB=2
0.5 1 2 5 10 20 50
0.2 0.1 -0.1 -0.2
0.5
1
2
5
10
20
50
10 0.1 0.2
-0.5
-1
-2
-5
-10 -20
-50
COLLECTOR CURRENT : IC (mA)
COLLECTOR CURRENT : IC (mA)
EMITTER CURRENT : IE (mA)
Fig.1 DC current gain vs. collector current
Fig.2 Collector-emitter saturation voltage vs. collector current
Fig.3 Gain bandwidth product vs. emitter current
5.0
COLLECTOR TO BASE TIME CONSTANT : Cc rbb'(ps)
OUTPUT CAPACITANCE : Cob (pF) FEEDBACK CAPACITANCE : Cre (pF)
Ta=25C f=1MHz IE=0A
50
Ta=25C VCE=10V f=31.8MHz
NOISE FIGURE : NF (dB)
Ta=25C VCE=6V f=500MHz
20
2.0 1.0
20 10
Cob Cre
0.5
5.0
10
0.2 0.1 0.1 0.2
2.0 1.0 0.1 0.2
0.5
1
2
5
10
20
50
0.5
1
2
5
10
20
50
0 0.1 0.2
0.5
1
2
5
10
20
50
COLLECTOR TO BASE VOLTAGE : VCB (V)
COLLECTOR CURRENT : IC (mA)
COLLECTOR CURRENT : IC (mA)
Fig.4 Capacitance vs. reverse bias voltage
Fig.5 Collector to base time constant vs. collector current characteristics
Fig.6 Noise factor vs. collector current characteristics
Rev.A
2/2
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1

▲Up To Search▲

Price & Availability of UMX5N

	To Download UMX5N Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .