View VC-2R8A24-1747S_1334171.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FUJITSU MEDIA DEVICE DATA SHEET
DS04-21713-1E
ASSP for Mobile Telephone
VCO (800 to 2000 MHz) VC-24 Series
s DESCRIPTION
With excellent C/N characteristics and low current consumption, this VCO series is suitable for use with GSM and DCS and is ideal to miniaturize dual-band mode products. The VC-24 series can be used in any frequency band in the 800 MHz to 2000 MHz range. The device utilizes FUJITSU MEDIA DEVICE's high-frequency design technology, high-density mounting technology, and frequency adjustment technology to provide a high level of reliability in addition to high performance and small size.
s FEATURES
* * * * * * Superior noise characteristics (C/N, S/N) Frequency switching type High level of stability in response to ambient temperature and load variations FUJITSU MEDIA DEVICE's proprietary fabrication process provides a uniform central frequency distribution Small size, light-weight, slim-package : 9.3 x 7.2 x 2.0 mm (Max.) SMD-type taping specifications suitable for automatic mounting and reflow soldering
s PACKAGE
VC-24 Series
s PIN ASSIGNMENT
(TOP VIEW)
6 5 4
7
8
1
2
3
s PIN DESCRIPTION
Pin No. 1 2 3 4 5 6 7 8 Symbol Vt GND VCC OUT GND VSW GND GND Control voltage GND Power Supply Voltage Output GND Band select GND GND Description
s PRODUCT LINEUP (STANDARD MODELS)
System Tx GSM/DCS Rx Rx Center Frequency (MHz) 897 1747 1167 1617 1202 1559 Band Width (MHz) 17.5 37.5 17.5 40 40 39 Power Supply Voltage (V) 2.8 0.1 2.8 0.1 2.8 0.1 Part Number VC-2R8A24-0897/1747S VC-2R8A24-1167/1617 VC-2R8A24-1202/1559P
2
VC-24 Series
s ELECTRICAL CHARACTERISTICS
1. For GSM/DCS (Tx) (Part number : VC-2R8A24-0897/1747S)
* Absolute Maximum Ratings Parameter Input DC voltage Control voltage SW voltage Operating temperature Storage temperature Storage humidity Symbol VCC Vt VSW Ta Tstg Hstg Rating Min. -10 -30 5 Max. +3.0 +3.0 +3.0 +75 +85 95 Unit V V V C C %
WARNING: VCO can be permanently damaged by application of stress (voltage, temperature, humidity, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
* Band Selection Mode Band Width GSM DCS Selection Mode Band1 Band2 VSW (V) Min. 0.0 2.7 Max. 0.1 2.8 Center Frequency (MHz) 897 1747 Current Consumption (mA) Typ. 0.0 0.5
3
VC-24 Series
* Electrical Characteristics Band1 Value Min. 915.0 32.0 5.5 Typ. 38.0 8.5 Max. 38.0 0.1 880.0 44.0 11.5 -93.0 -123.0 -153.0 -162.0 -10.0 1000 2000 3000 (Ta = -10C to +75C) Symbol ICC ISW fmin fmax Svt Po Conditions VCC = 2.8 V, Vt = 1.35 V VCC = 2.8 V, Vt = 1.35 V, VSW = 0 V VCC = 2.8 V, Vt = 0.5 V VCC = 2.8 V, Vt = 2.2 V (fmax - fmin) /1.7 VCC = 2.8 V, Vt = 1.35 V VCC = 2.8 V, Vt = 1.35 V, Offset = 10 kHz, BW = 1 Hz VCC = 2.8 V, Vt = 1.35 V, Offset = 400 kHz, BW = 1 Hz VCC = 2.8 V, Vt = 1.35 V, Offset = 10 MHz, BW = 1 Hz VCC = 2.8 V, Vt = 1.35 V, Offset = 20 MHz, BW = 1 Hz Higher harmonics Power supply variation Load variation Temperature drift Hs Push Pull Td VCC = 2.8 V, Vt = 1.35 V, Up to 3rd VCC = 2.8 V 0.1 V, Vt = 1.35 V VCC = 2.8 V , Vt = 1.35 V, VSWR = 2, All phases VCC = 2.8 V, Vt = 1.35 V Unit mA mA MHz MHz MHz/V dBm dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc kHz kHz kHz
Parameter Current consumption SW current Frequency Frequency Control voltage sensitivity Oscillator output
C/N
C/N
4
VC-24 Series
Band2 Value Min. 1785.0 57.0 4.5 Typ. 67.0 7.5 Max. 38.0 1.0 1710.0 77.0 10.5 -90.0 -120.0 -150.0 -157.0 -10.0 2000 4000 5000 (Ta = -10C to +75C) Symbol ICC Isw fmin fmax Svt Po Conditions VCC = 2.8 V, Vt = 1.35 V VCC = 2.8 V, Vt = 1.35 V, VSW = 2.8 V VCC = 2.8 V, Vt = 0.5 V VCC = 2.8 V, Vt = 2.2 V (fmax - fmin) /1.7 VCC = 2.8 V, Vt = 1.35 V VCC = 2.8 V, Vt = 1.35 V, Offset = 10 kHz, BW = 1 Hz VCC = 2.8 V, Vt = 1.35 V, Offset = 400 kHz, BW = 1 Hz VCC = 2.8 V, Vt = 1.35 V, Offset = 10 MHz, BW = 1 Hz VCC = 2.8 V, Vt = 1.35 V, Offset = 20 MHz, BW = 1 Hz Higher harmonics Power supply variation Load variation Temperature drift Hs Push Pull Td VCC = 2.8 V, Vt = 1.35 V, Up to 3rd VCC = 2.8 V 0.1 V, Vt = 1.35 V VCC = 2.8 V , Vt = 1.35 V, VSWR = 2, All phases VCC = 2.8 V, Vt = 1.35 V Unit mA mA MHz MHz MHz/V dBm dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc kHz kHz kHz
Parameter Current consumption SW current Frequency Frequency Control voltage sensitivity Oscillator output
C/N
C/N
5
VC-24 Series
2. For GSM/DCS (Rx) (Part number : VC-2R8A24-1167/1617)
* Absolute Maximum Ratings Parameter Input DC voltage Control voltage SW voltage Operating temperature Storage temperature Storage humidity Symbol VCC Vt VSW Ta Tstg Hstg Rating Min. -10 -30 5 Max. +3.0 +3.0 +3.0 +75 +85 95 Unit V V V C C %
WARNING: VCO can be permanently damaged by application of stress (voltage, temperature, humidity, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. * Band Selection Mode Band Width GSM DCS * Electrical Characteristics Band1 Symbol ICC Isw fmin fmax Svt Po (Ta = -10C to +75C) Value Unit Typ. Max. 36.0 -2.0 10.0 0.1 1150.0 43.0 2.0 -85.0 -123.0 -133.0 -142.0 -10.0 1000 1500 3000 mA mA MHz MHz MHz/V dBm dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc kHz kHz kHz Selection Mode Band1 Band2 VSW (V) Min. 0.0 2.7 Max. 0.1 2.8 Center Frequency (MHz) 1167 1617 Current Consumption (mA) Typ. 0.0 0.5
Parameter Current consumption SW current Frequency Frequency Control voltage sensitivity Oscillator output
Conditions VCC = 2.8 V, Vt = 1.35 V VCC = 2.8 V, Vt = 1.35 V, VSW = 0 V VCC = 2.8 V, Vt = 0.5 V VCC = 2.8 V, Vt = 2.2 V (fmax - fmin) /1.7 VCC = 2.8 V, Vt = 1.35 V VCC = 2.8 V, Vt = 1.35 V, Offset = 10 kHz, BW = 1 Hz VCC = 2.8 V, Vt = 1.35 V, Offset = 600 kHz, BW = 1 Hz VCC = 2.8 V, Vt = 1.35 V, Offset = 1.6 MHz, BW = 1 Hz VCC = 2.8 V, Vt = 1.35 V, Offset = 3 MHz, BW = 1 Hz
Min. 1185.0 29.0 -6.0
C/N
C/N
Higher harmonics Power supply variation Load variation Temperature drift 6
Hs Push Pull Td
VCC = 2.8 V, Vt = 1.35 V VCC = 2.8 V 0.1 V, Vt = 1.35 V VCC = 2.8 V , Vt = 1.35 V, VSWR = 2, All phases VCC = 2.8 V, Vt = 1.35 V
VC-24 Series
Band2 Value Min. 1657.5 56.0 -6.0 Typ. 66.0 -2.0 Max. 10.0 1.0 1577.5 76.0 +2.0 -85.0 -123.0 -133.0 -140.0 -10.0 1500 2000 5000 (Ta = -10C to +75C) Symbol ICC ISW fmin fmax Svt Po Conditions VCC = 2.8 V, Vt = 1.35 V VCC = 2.8 V, Vt = 1.35 V, VSW = 2.8 V VCC = 2.8 V, Vt = 0.5 V VCC = 2.8 V, Vt = 2.2 V (fmax - fmin) /1.7 VCC = 2.8 V, Vt = 1.35 V VCC = 2.8 V, Vt = 1.35 V, Offset = 10 kHz, BW = 1 Hz VCC = 2.8 V, Vt = 1.35 V, Offset = 400 kHz, BW = 1 Hz VCC = 2.8 V, Vt = 1.35 V, Offset = 10 MHz, BW = 1 Hz VCC = 2.8 V, Vt = 1.35 V, Offset = 20 MHz, BW = 1 Hz Higher harmonics Power supply variation Load variation Temperature drift Hs Push Pull Td VCC = 2.8 V, Vt = 1.35 V, Up to 3rd VCC = 2.8 V 0.1 V, Vt = 1.35 V VCC = 2.8 V , Vt = 1.35 V, VSWR = 2, All phases VCC = 2.8 V, Vt = 1.35 V Unit mA mA MHz MHz MHz/V dBm dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc kHz kHz kHz
Parameter Current consumption SW current Frequency Frequency Control voltage sensitivity Oscillator output
C/N
C/N
7
VC-24 Series
3. For GSM/DCS (Rx) (Part number : VC-2R8A24-1202/1559P)
* Absolute Maximum Ratings Parameter Input DC voltage Control voltage SW voltage Operating temperature Storage temperature Storage humidity Symbol VCC Vt VSW Ta Tstg Hstg Rating Min. 0.0 0.0 0.0 -20 -35 5 Max. +3.0 +2.5 +3.0 +75 +85 95 Unit V V V C C %
WARNING: VCO can be permanently damaged by application of stress (voltage, temperature, humidity, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. * Band Selection Mode Band Width GSM DCS * Electrical Characteristics Band1 Symbol ICC ISW fmin fmax Svt Po Value Min. 1242.0 66.0 -5.0 85.0 140.0 Typ. 76.0 -2.0 Max. 9.0 0.1 1162.0 86.0 1.0 -10.0 -87.0 1000 2000 (Ta = -20C to +75C) Parameter Current consumption SW current Frequency Frequency Control voltage sensitivity Oscillator output Conditions VCC = 2.8 V, Vt = 1.5 V VCC = 2.8 V, Vt = 1.5 V, VSW = 0 V VCC = 2.8 V, Vt = 0.8 V VCC = 2.8 V, Vt = 2.2 V (fmax - fmin) /1.4 VCC = 2.8 V, Vt = 1.5 V VCC = 2.8 V, Vt = 1.5 V, Offset = 10 kHz, BW = 1 Hz VCC = 2.8 V, Vt = 1.5 V, Offset = 3000 kHz, BW = 1 Hz VCC = 2.8 V, Vt = 1.5 V, Up to 3rd VCC = 2.8 V, Vt = 1.5 V, Offset = 3 MHz (Min.) VCC = 2.8 V 0.1 V, Vt = 1.5 V VCC = 2.8 V, Vt = 1.5 V, VSWR = 2, All phases Unit mA mA MHz MHz MHz/V dBm dBc/Hz dBc/Hz dBc dBc kHz kHz Selection Mode Band1 Band2 VSW (V) Min. 0.0 2.5 Max. 0.3 2.8 Center Frequency (MHz) 1202 1559 Current Consumption (mA) Typ. 0.0 0.4
C/N
C/N
Higher harmonics Spurious Power supply variation Load variation
Hs SP Push Pull
8
VC-24 Series
Band2 Value Min. 1598.0 88.0 -6.0 85.0 135.0 Typ. 98.0 -2.0 Max. 10.5 1.0 1520.0 108.0 2.0 -10.0 -82.0 1000 2000 (Ta = -20C to +75C) Symbol ICC ISW fmin fmax Svt Po Conditions VCC = 2.8 V, Vt = 1.5 V VCC = 2.8 V, Vt = 1.5 V, VSW = 2.8 V VCC = 2.8 V, Vt = 0.8 V VCC = 2.8 V, Vt = 2.2 V (fmax - fmin) /1.4 VCC = 2.8 V, Vt = 1.5 V VCC = 2.8 V, Vt = 1.5 V, Offset = 10 kHz, BW = 1 Hz VCC = 2.8 V, Vt = 1.5 V, Offset = 3000 kHz, BW = 1 Hz VCC = 2.8 V, Vt = 1.5 V, 2nd, 3rd VCC = 2.8 V, Vt = 1.5 V, Offset = 3 MHz (Min.) VCC = 2.8 V 0.1 V, Vt = 1.5 V VCC = 2.8 V, Vt = 1.5 V, VSWR = 2, All phases Unit mA mA MHz MHz MHz/V dBm dBc/Hz dBc/Hz dBc dBc kHz kHz
Parameter Current consumption SW current Frequency Frequency Control voltage sensitivity Oscillator output
C/N
C/N
Higher harmonics Spurious Power supply variation Load variation
Hs SP Push Pull
9
VC-24 Series
s MARKING
6
5
4
Part symbol
7 8
Lot number Logo
Trimming window Index
1 2 3
s PART NUMBER DESIGNATION
VC - 2R8 A 24 - 0897/1747 S
Numbers Specified by FUJITSU MEDIA DEVICE Center Frequency Series Name Outer Sheath Type Power Supply Voltage Product Category
Band 1 : 897 MHz Band 2 : 1747 MHz : VC-24 Series : SMD : 2.8 V : VCO
10
VC-24 Series
s PACKAGE DIMENSION
9.0
+0.3 -0.2
1.0
2.8
1 7.0 0.2 7 6
2
3 8 2.8 5.0
5
4
1.0
2.0 Max.
7.0
Dimensions in mm
s RECOMMENDED PATTERN FOR SOLDERING
7.0 2.8 1.0 1.0 2.8 5.2
8.0 10.6
7.6
Dimensions in mm Dimension tolerance : 0.1 mm
11
VC-24 Series
s TAPING AND PACKAGING
(1) Carrier Tape and Packaging
2.0 0.1
4.0 0.1
1.5 -0
+0.1
7.5 0.1 1.75 0.1
2.8 0.1
9.8 0.1
1.5 -0 12.0 0.1 7.4 0.1
+0.1
16.0 0.3
0.3 0.05
Dimensions in mm
(2) Taping Layout
Feeder
150 mm 360 mm
Reel side
Direction of pulling
Rulling side
Empty 50mm or more
Marking of pin 1
Empty 400 mm or more
1000 packages
12
VC-24 Series
(3) Reel Shape and Dimensions
25.4 Max.
330.0 2.0
80.0 1.5
21.0 0.5
Label
3.0 0.5 16.4 -0
+2.0
Note : The label specifies the part number, quantity, and lot number.
Volume : 1000 pcs/reel Type : (L) 340 x (W) 340 x (t) 30 (mm)
13.0 0.3
Dimensions in mm
13
VC-24 Series
s REFLOW MOUNTING CONDITIONS (RECOMMENDED)
* Perform mounting using the temperature profile shown below. To prevent thermal stress to the VCO, ensure gentle temperature gradients and use preheating whenever possible. * Always consult FUJITSU MEDIA DEVICE beforehand if mounting more than once. * Never remove a VCO that has already been mounted and attempt to reuse. * For mounting, use a general-purpose flux suitable for mounting electronic components.
250 230 10 200
7 s Max.
2 1 20 s 30 s
Temperature (C)
160 150 140 60 s 20 s
100
50
Warm-up
0
Pre-heating Time (s)
Heating
Cooling
1 : 10C/s or less 2 : 8C/s or less
s WASHING CONDITIONS
* Washing solution: Use isopropyl alcohol. * Washing procedure: Immersion or steam cleaning is recommended. * Washing time: For immersion: Less than 5 minutes at 40C or less. For steam: Less than 2 minutes at 90C or less is recommended.
14
VC-24 Series
FUJITSU MEDIA DEVICES LIMITED
For further information please contact: Japan FUJITSU MEDIA DEVICE LIMITED International SalesMarketing DEPT. Shin-Yokohama Square Bldg.,14F, Shin-yokohama 2-3-12, Kohoku-ku, Yokohama, Kanagawa 222-0033, Japan Tel: +81-45-471-0061 Fax: +81-45-471-0076
http://www.fujitsu.co.jp/hypertext/fmd/English/index.html
All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. The information and circuit diagrams in this document are presented as examples of semiconductor device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. The contents of this document may not be reproduced or copied without the permission of FUJITSU LIMITED. FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation and other office equipments, industrial, communications, and measurement equipments, personal or household devices, etc.). CAUTION: Customers considering the use of our products in special applications where failure or abnormal operation may directly affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.) are requested to consult with FUJITSU sales representatives before such use. The company will not be responsible for damages arising from such use without prior approval. Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan.
North and South America FUJITSU MICROELECTRONICS, INC. 3545 North First Street, San Jose, CA 95134-1804, U.S.A. Tel: +1-408-922-9000 Fax: +1-408-922-9179 Customer Response Center Mon. - Fri.: 7 am - 5 pm (PST) Tel: +1-800-866-8608 Fax: +1-408-922-9179 http://www.fujitsumicro.com/ Europe FUJITSU MICROELECTRONICS EUROPE GmbH Am Siebenstein 6-10, D-63303 Dreieich-Buchschlag, Germany Tel: +49-6103-690-0 Fax: +49-6103-690-122 http://www.fujitsu-fme.com/ Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LTD. #05-08, 151 Lorong Chuan, New Tech Park, Singapore 556741 Tel: +65-281-0770 Fax: +65-281-0220 http://www.fmap.com.sg/
F0101 (c) FUJITSU LIMITED Printed in Japan

▲Up To Search▲

Price & Availability of VC-2R8A24-1747S

	To Download VC-2R8A24-1747S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .