![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
T-1 (3mm) INFRA-RED EMITTING DIODE P/N: WP34F3BT Features MECHANICALLY AND SPECTRALLY MATCHED TO THE WP34P3BT PHOTOTRANSISTOR. BLUE TRANSPARENT LENS. RoHS COMPLIANT. Description F3 Made with Gallium Arsenide Infrared Emitting diodes. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF0435 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: DEC/07/2005 DRAWN: Y.W.WANG PAGE: 1 OF 4 ERP:1101003406 Selection Guide Part No. Dice Lens Type Po (mW/sr) @20mA*50mA Min. 1.6 WP34F3BT GaAs BLUE TRANSPARENT *7 Typ. 10 50 *20 Viewing Angle 21/2 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. * Luminous intensity with asterisk is measured at 50mA. Electrical / Optical Characteristics at TA=25C Item Forward Voltage Reverse Current Capacitance Peak Spectral Wavelength Spectral Bandwidth F3 F3 F3 F3 F3 P/N Symbol VF IR C P 1/2 Typ. 1.2 90 940 50 Max. 1.6 10 Units V uA pF nm nm Test Conditions IF=20mA VR=5V VF=0V;f=1MHz IF=20mA IF=20mA Absolute Maximum Ratings at TA=25C Parameter Power Dissipation DC Forward Current Peak Forward Current[1] Reverse Voltage Operating Temperature Storage Temperature Lead Solder Temperature [2] Lead Solder Temperature [3] Notes: 1. 1/100 Duty Cycle, 10s Pulse Width. 2. 2mm below package base. 3. 5mm below package base. Symbol PT IF iFS VR TA TSTG F3 100 50 1.2 5 -40 To +85 -40 To +85 260C For 3 Seconds 260C For 5 Seconds Units mW mA A V C C SPEC NO: DSAF0435 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: DEC/07/2005 DRAWN: Y.W.WANG PAGE: 2 OF 4 ERP:1101003406 WP34F3BT SPEC NO: DSAF0435 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: DEC/07/2005 DRAWN: Y.W.WANG PAGE: 3 OF 4 ERP:1101003406 PACKING & LABEL SPECIFICATIONS WP34F3BT Remarks: If special sorting is required (e.g. binning based on forward voltage or radiant intensity/ luminous flux), the typical accuracy of the sorting process is as follows: 1. Radiant Intensity/ luminous flux: +/-15% 2. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF0435 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: DEC/07/2005 DRAWN: Y.W.WANG PAGE: 4 OF 4 ERP:1101003406 |
Price & Availability of WP34F3BT
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |