 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| WSH520 Low voltage Single Coil Hall Effect IC with Complementary Output Drivers Features: Operate from 1.8V to 4.5V supply voltage. On-chip Hall sensor. Internal thermal compensation circuit enable operation in a wide range temperature without loss of sensitivity. Output sinking capability up to 200mA for driving large load. Available in rugged low profile SOT-25 packages. General Description: WSH520 is designed to integrate Hall sensor with complementary output drivers on the same chip, it is suitable for single coil DC brushless motors. It includes a temperature compensated circuit, a differential amplifier, a Hysteresis controller, complementary bi-direction drivers for sinking and driving large current load. WSH520 are rated for operation over temperature range from -20 C to 75C and voltage ranges from 1.8V to 4.5V. Pin Descriptions: (SOT-25) Name P/I/O Pin# Vcc P 1 Vss P 2 DO O 3 DOB O 4 Description Positive Power Supply Ground Output Pin #2 Output Pin #1 Absolute Maximum Rating (at Ta=25 C) Supply Voltage Vcc -------------------------Magnetic flux density B -------------------------Output ON Current (continuous) Ic -------------------------Operating Temperature Range Storage Temperature Range Package Power Dissipation Ta -------------------------Ts -------------------------Pd -------------------------- 5V Unlimited 220mA (-20C to +75C) (-65C to +150C) 350mw for SOT-25 Winson reserves the right to make changes to improve reliability or manufacturability. (c)Winson, April.2003 WSH520 Electrical Characteristics: (T=+25C, Vcc=1.8V to 4.5V) Characteristic Symbol Test Conditions Min Typ Max Units Supply Voltage Vcc V 1.8 4.5 Output Saturation Vout(sat) Vcc=3V, Io=150mA V 0.6 1.0 Vdrive+Vsink Voltage Output Leakage Ileakage Vcc=3V, B < Brp uA <0.1 10 Current Supply Current Isupply Vcc=3V, Io=150mA mA 10 20 Function Block: Winson reserves the right to make changes to improve reliability or manufacturability. (c)Winson, April.2003 WSH520 Magnetic Characteristics: Characteristics Operate Point Release Point Hysteresis Window Symbol Bop Brp Bop-Brp Quantity Grade A Grade B Grade A Grade B -70 -100 Ta= -20C to +80C Typ. Max 35 50 -35 -50 70 Unit Min 70 100 Gauss Gauss 150 Gauss Ordering Information: SOT-25: WSH520-XPD Elec. Grade SOT-25: 1: A Grade (70 Gauss) 2: B Grade (100 Gauss) Test Circuit: Winson reserves the right to make changes to improve reliability or manufacturability. (c)Winson, April.2003 WSH520 1. SOT-25: Package Information: 1. SOT-25 Winson reserves the right to make changes to improve reliability or manufacturability. (c)Winson, April.2003 WSH520 Application Circuit: 1-1. SOT-25 Winson reserves the right to make changes to improve reliability or manufacturability. (c)Winson, April.2003 WSH520 Figure 1. 1-2. SOT-25 Figure 2. IV-Curve Isupply vs Operation Voltage 25 20 15 mA Isupply 10 5 0 2 2.5 3 Operation Voltage 3.5 4 Winson reserves the right to make changes to improve reliability or manufacturability. (c)Winson, April.2003 |
Price & Availability of WSH520-XPD2
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |