 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2SA1483 TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT process) 2SA1483 High Frequency Amplifier Applications Video Amplifier Applications High Speed SwitcHing Applications * * * High transition frequency: fT = 200 MHz (typ.) Low collector output capacitance: Cob = 3.5 pF (typ.) Complementary to 2SC3803 Unit: mm Absolute Maximum Ratings (Ta = 25C) Characteristics Collector-base voltage Collector-emitter voltage Emitter-base voltage Continuous collector current Continuous base current Symbol VCBO VCEO VEBO IC IB PC Collector power dissipation PC (Note 1) Junction temperature Storage temperature range Tj Tstg Rating -60 -45 -5 -200 -50 500 1000 150 -55 to 150 mW Unit V V V mA mA PW-MINI JEDEC JEITA TOSHIBA SC-62 2-5K1A C C Weight: 0.05 g (typ.) Note 1: Mounted on a ceramic substrate (250 mm2 x 0.8 t) Note 2: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 1 2006-11-09 2SA1483 Electrical Characteristics (Ta = 25C) Characteristics Collector cut-off current Emitter cut-off current Symbol ICBO IEBO hFE (1) DC current gain (Note 3) hFE (2) Collector-emitter saturation voltage Base-emitter saturation voltage Transition frequency Input impedance (real part) Collector output capacitance Turn-on time VCE (sat) VBE (sat) fT Re (hie) Cob ton INPUT 680 Switching time Storage time tstg 0 -10 V 1 s 500 50 Test Condition VCB = -45 V, IE = 0 VEB = -5 V, IC = 0 VCE = -1 V, IC = -10 mA VCE = -3 V, IC = -200 mA IC = -100 mA, IB = -10 mA IC = -100 mA, IB = -10 mA VCE = -10 V, IC = -10 mA VCE = -10 V, IE = 10 mA, f = 200 MHz VCB = -10 V, IE = 0, f = 1 MHz OUTPUT 200 Min 40 20 100 Typ. 200 3.5 40 Max -0.1 -0.1 240 -0.3 -1.0 120 5 V V MHz pF Unit A A Fall time tf VBB =3V DUTY CYCLE 2% VCC = -12 V 250 ns 30 Note 3: hFE (1) classification R: 40 to 80, O: 70 to 140, Y: 120 to 240 Marking Part No. (or abbreviation code) W Lot No. Characteristics indicator A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2006-11-09 2SA1483 IC - VCE 1000 -10 -5.0 -3.0 -2.0 -120 -1.5 -1.0 -80 -0.5 -40 IB = -0.2 mA 0 0 0 -1 -2 -3 -4 -5 -6 hFE - IC DC current gain hFE Common emitter Ta = 25C Common emitter 500 300 Ta = 100C 25 -55 VCE = -3 V -200 (mA) -160 Collector current IC 100 50 30 10 -0.1 -0.3 -1 -3 -10 -30 -100 Collector current IC (mA) Collector-emitter voltage VCE (V) Collector-emitter saturation voltage VCE (sat) (V) VCE (sat) - IC -0.5 -0.3 Common emitter IC/IB = 10 -0.1 -0.05 -0.03 25 -55 -0.01 -0.1 -0.3 -1 -3 -10 -30 -100 Ta = 100C IC - VCE -200 -8.0 Common emitter Ta = 100C (mA) -160 -4.0 -2.0 Collector current IC (mA) Collector current IC -120 Base-emitter saturation voltage VBE (sat) (V) -1.0 -80 -0.6 IB = -0.2 mA VBE (sat) - IC -5 -3 Common emitter IC/IB = 10 -1 -0.5 -0.3 Ta = -55C -40 0 0 0 -1 -2 -3 -4 -5 -6 25 100 Collector-emitter voltage VCE (V) -0.1 -0.1 -0.3 -1 -3 -10 -30 -100 Collector current IC (mA) IC - VCE 1.2 -6.0 -4.0 -3.0 -120 -2.0 -1.5 -80 -1.0 IB = -0.5 mA 0 0 0 -1 -2 -3 -4 -5 -6 0 0 20 40 60 PC - Ta (W) Common emitter Ta = -55C (1) Mounted on a ceramic 2 substrate (250 mm x 0.8 t) (2) No heat sink 0.8 -200 1.0 (mA) -160 Collector power dissipation Collector current IC PC 0.6 0.4 0.2 -40 80 100 120 140 160 Collector-emitter voltage VCE (V) Ambient temperature Ta (C) 3 2006-11-09 2SA1483 RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 4 2006-11-09 |
Price & Availability of 2SA148307
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |