 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Optoway FEATURES l l l l l l l l l l l l l l l TRS-7130G 1 *********************************************************************************************************************************************************************** TRS-7130G / TRS-7130CG / TRS-7130TG / TRS-7130TCG / TRS-7130FG / TRS-7130FCG 3.3V / 1310 nm / 1.25 Gbps RoHS Compliant Optical Single-Mode Transceiver ********************************************************************************************************************************************************************** DESCRIPTION Duplex SC Single Mode Transceiver: TRS-7130G Duplex ST Single Mode Transceiver: TRS-7130TG Duplex FC Single Mode Transceiver: TRS-7130FG Compliant with IEEE-802.3z Gigabit Ethernet Distance up to 30 km Link Power Budget at Least 19 dB Industry Standard 1 x 9 Footprint Single +3.3 V Power Supply RoHS Compliant 0 to 70oC Operating: TRS-7130G -20 to 85oC Operating: TRS-7130AG LVPECL Signal Detect Output : TRS-7130G LVTTL Signal Detect Output : TRS-7130CG Wave Solderable and Aqueous Washable Class 1 Laser International Safety Standard IEC 825 Compliant The TRS-7130G series single mode transceivers is low power, high performance module for bi-directional serial optical data communications such Gigabit Ethernet and Fibre Channel This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC 825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC 825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l Switch to Switch Interface l High Speed Interface for File Servers l High Performance Desktops ORDER INFORMATION P/No. Bit Rate (Mb/s) 1250 1250 1000 BASE Distance Wavelength Voltage (km) (nm) (V) 30 30 1310 1310 DFB 3.3 3.3 Package Temp. (oC) TX Power (dBm) 0 to -5 0 to -5 RX Sens. RoHS (dBm) Compliant -24 -24 Y Y TRS-7130G TRS-7130AG 1X9 SC/ST/FC 0 to 70 1X9 SC/ST/FC -20 to 85 Note: TRS-XXXXXF for FC duplex transceiver, TRS-XXXXXT for ST duplex transceiver, TRS-XXXXX-EM for SC duplex transceiver with extended EMI shielding, TRS-XXXXXCX for transceiver with TTL signal detection output. Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Soldering Temperature Power Supply Voltage Input Voltage Output Current Symbol Tstg Topr --Vcc --Iout Min -40 0 -20 0 GND 0 Max 85 70 85 260 4.5 Vcc 30 Units o C o C o Notes TRS-7130G TRS-7130AG 10 seconds on leads only C V V mA Recommended Operating Conditions Parameter Power Supply Voltage Operating Temperature Data Rate Power Supply Current Symbol Vcc Topr Min 3.1 0 -20 Typ 3.3 Max 3.5 70 85 1300 260 Units V o C / TRS-7130G o C / TRS-7130AG Mb/s mA Icc 1250 180 *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2005 V3.0 Optoway Transmitter Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3. 5V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Symbol Po Min -5 1285 1261 --Typ --1310 1.8 1 Extinction Ratio Output Eye Optical Rise Time Optical Fall Time Relative Intensity Noise Total Jitter Electrical Data Input Current - Low Data Input Current - High Differential Input Voltage Data Input Voltage - Low Data Input Voltage -- High ER 9 Compliant with IEEE 802.3z tr tf RIN TJ IIL IIH VIH - VIL VIL - VCC VIH - VCC -350 350 300 -2.0 -1.1 -1.58 -0.74 --0.26 0.26 -120 0.227 Max 0 1340 1360 Units dBm nm nm nm nm dB ns ns dB/Hz ns A A mV V V TRS-7130G 2 ********************************************************************************************************************************************************************** Notes 1 TRS-7130G TRS-7130AG RMS ()/TRS-7130G -20 dB width / TRS-7130AG 20% to 80% Values 20% to 80% Values 2 3 3 Notes: 1. Output power is power coupled into a 9/125 m single mode fiber. 2. Measured with a 27-1 PRBS. 3. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs. Receiver Specifications (0oC < Topr < 70oC, 3.1 V < Vcc < 3. 5V) Parameter Optical Sensitivity Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation Electrical Data Output Voltage - Low Data Output Voltage - High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Symbol --Pin Pa Pd Min ---3 ---36 1.0 1100 -2.0 -1.1 -2.0 -1.1 2.0 Typ ----------Max -24 ---24 --1600 -1.58 -0.74 -1.58 -0.74 0.5 Units dBm dBm dBm dBm dB nm V V V V V V Notes 1 Transition: low to high Transition: high to low VOL - VCC VOH - VCC VOL - VCC VOH - VCC VSDL VSDH 2 2 TRS-7130G TRS-7130CG Notes: 1. Minimum sensitivity and saturation levels at BER=1E-12 for a 2 7-1 PRBS at ER=9 dB. 2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL inputs. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2005 V3.0 Optoway CONNECTION DIAGRAM Receiver Signal Ground 1 (Rx GND) Receiver Data Out 2 (RD+) Receiver Data Out Bar 3 (RD-) Signal Detect 4 (SD) Receiver Power Supply 5 (Rx Vcc) Transmitter Power Supply 6 (Tx Vcc) Transmitter Data In Bar 7 (TD-) Transmitter Data In 8 (TD+) Transmitter Signal Ground 9 (Tx GND) N/C TRS-7130G 3 ********************************************************************************************************************************************************************** TOP VIEW N/C PIN 1 2 3 4 5 6 7 8 9 Symbol Rx GND RD+ RD- SD Rx Vcc Tx Vcc TD- TD+ Tx GND Notes Directly connect this pin to the receiver ground plane See recommended circuit schematic See recommended circuit schematic Active high on this indicates a received optical signal +3.3V dc power for the receiver section +3.3V dc power for the transmitter section See recommended circuit schematic See recommended circuit schematic Directly connect this plan to the transmitter ground plane RECOMMENDED CIRCUIT SCHEMATIC Transceiver TX GND 9 SerDes IC VCC 3.3V LD Driver 100R TD+ 0.1uF TD0.1uF 8 Z=50R 7 Z=50R 1uH Vcc 3.3V VCC 3.3V TD+ LVPECL TD- TX Vcc 6 10nF 10uF 1uH R1 RX Vcc 5 10nF 10uF R2 SD Level VCC 3.3V SD RD0.1uF POST Amp RD+ 0.1uF 180R RX GND 180R 4 3 Z=50R R7 2 Z=50R 1 CDR or PHY DEVICE RD+ LVPECL RD- For TTL SD Level, R1=R2=N.C., R7=100 ohm For PECL SD Level, R1=130 ohm, R2=82 ohm, R7=100 ohm The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc and Tx Vcc. A GND plane under the module is required for good EMI and sensitivity performance. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2005 V3.0 Optoway PACKAGE DIAGRAM Units in mm TRS-7130G 4 ********************************************************************************************************************************************************************** 1) SC Type With Extended Shielding TX OPTICAL RX OPTICAL TRS-7130-EMG / TRS-7130C-EMG / TRS-7130A-EMG / TRS-7130AC-EMG 2) ST Type TX OPTICAL RX OPTICAL TRS-7130TG / TRS-7130TCG / TRS-7130ATG / TRS-7130ATCG ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2005 V3.0 Optoway 3) FC Type 12.7 TRS-7130G 5 ********************************************************************************************************************************************************************** TX OPTICAL RX OPTICAL 2.54*8 20.32 25.4 13.9 10 5.97 10.18 20.32 34.5MAX TRS-7130FG / TRS-7130FCG / TRS-7130AFG / TRS-7130AFCG Note: Specifications subject to change without notice. ********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2005 V3.0 0.75 O1.3 13.7 |
Price & Availability of TRS-7130AG
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |