View HT1117-ADJ_4123467.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HT1117 Series 1A General Purpose LDO
Features
* Output voltage ranges: Fixed range of 1.8V, 2.5V, * Guaranteed output current: 1A * Low quiescent current: 8mA (typ.) * Integrated current limit & thermal protection circuits * SOT-223 package
2.85V, 3.3V, 5.0V or adjustable type.
* High accuracy: 2% * Low voltage drop: 1.1V (typ.), VOUT=5.0V at 1A
Applications
* Active SCSI terminations * Post regulator for switching power supplies * Low voltage microcontrollers * Motherboard clock supplies * Battery chargers
General Description
The HT1117 devices are a series of three-terminal high current low voltage regulators. They can deliver an output current of 1A and can accept input voltages up to 12V. The devices are available in both adjustable and fixed output voltage type with a range of 1.8V to 5.0V. Internal current limit and thermal protection circuits provide protection against overload conditions that could create excessive junction temperatures.
Selection Table
Part No. HT1117-ADJ HT1117-18 HT1117-25 HT1117-28 HT1117-33 HT1117-50 Note: Output Voltage Adjust 1.8V 2.5V SOT-223 2.85V 3.3V 5.0V HT1117-ADJ HT1117-18 HT1117-25 HT1117-28 HT1117-33 HT1117-50 Package Marking
For lead free devices, a # mark is suffixed at the end of the date code.
Block Diagram
V
IN
C u rre n t L im itin g A m p lifie r T h e rm a l P r o te c tio n V
OUT
E rro r Am p.
Bandgap R e fe re n c e
ADJ
GND
Rev. 1.00
1
August 7, 2007
HT1117 Series
Pin Assignment
S O T -2 2 3
1
H T 1 1 1 7 -X X 2 3
GND/ ADJ
VOUT
V IN
GND/ ADJ
VOUT
V IN
Absolute Maximum Ratings*
Input Supply Voltage ..................VSS-0.3V to VSS+13V Storage Temperature ...........................-50C to 125C
Note: These are stress ratings only. Stresses exceeding the range specified under Absolute Maximum Ratings may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability. * Absolute maximum ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but do not guarantee specific performance limits. The guaranteed specifications apply only for the test conditions listed.
Recommended Operating Conditions
Input Supply Voltage ..................VSS-0.3V to VSS+12V Ambient Temperature ............................-40C to 85C
Thermal Information
Symbol qJA PD Parameter Thermal Resistance (Junction to Ambient) Power Dissipation Package SOT-223 SOT-223 Max. 134 0.75 Unit C/W W
Note: PD is measured at Ta= 25C
Rev. 1.00
2
August 7, 2007
HT1117 Series
Electrical Characteristics
Symbol VREF Parameter Reference Voltage TJ=25C, VIN=VOUT+1.5V, IO=10mA, unless otherwise specified (see note 1) Test Conditions 2.75V VIN 12V HT1117-18 HT1117-25 VOUT Output Voltage HT1117-28 HT1117-33 HT1117-50 DVLOAD DVLINE VDIF ILIMIT IADJ ISS RR
DVO DT
a UT
Min. 1.225 1.764 2.45 2.793 3.234 4.90 1 3/4 3/4 1 3/4 3/4 3/4 3/4
Typ. 1.250 1.800 2.50 2.850 3.300 5.00 3/4 0.015 1.1 2.3 55 8 60 0.4
Max. 1.275 1.836 2.55 2.907 3.366 5.10 30 0.150 1.3 3/4 120 13 3/4 3/4
Unit V V V V V V mV %/V V A mA mA dB mV/C
Load Regulation (see note 2) Line Regulation Dropout Voltage (see note 3) Current Limit (see note 4) Adjust Pin Current (Variable Version) Quiescent Current (Fixed Version) Ripple Rejection Temperature Coefficient
10mA IOUT 1A 2.75V VIN 12V DVOUT=2%, IOUT=1A DVOUT=10% 2.75V VIN 12V 2.75V VIN 12V 120Hz input ripple COUT=22mF -40CNote:
1. Specifications are production tested at room temperature, Ta. Specifications within the -40C to 85C operating temperature range are assured by design, characterization and correlation with Statistical Quality Controls (SQC). 2. Load regulation is measured at a constant junction temperature, using pulse testing with a low ON time and is guaranteed up to the maximum power dissipation. Power dissipation is determined by the input/output differential voltage and the output current. Guaranteed maximum power dissipation will not be available over the full input/output range. The maximum allowable power dissipation at any ambient temperature is PD = (TJ(MAX) - Ta) / qJA. 3. Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT+1.5V with a fixed load. 4. Current limit is measured by pulsing for a short time.
Rev. 1.00
3
August 7, 2007
HT1117 Series
Application Circuits
Basic Circuits
* Variable voltage type
V
IN
V IN C1 10mF
H T 1 1 1 7 -A D J
ADJ IA
DJ
VOUT V
REF
V R1 125W R2 1kW C2 10mF
OUT
C om m on S in g le p o in t G N D
C om m on
VOUT = VREF ( 1 + Note:
R2 ) + IADJ R2 R1
C1 is required if the needed if the device is located far from filter capacitors, the recommended value is 10mF. C2 is required for stability, the recommended value is 10mF. R1 is required for regulation, the recommended value is 125W.
* Fixed voltage type
V
IN
V IN
H T1117 S e r ie s
GND
VOUT
V
OUT
C1 10mF
C2 10mF
C om m on
S in g le p o in t G N D
C om m on
Note:
C1 is required if the needed if the device is located far from filter capacitors, the recommended value is 10mF. C2 is required for stability, the recommended value is 10mF.
Typical Application Circuits
* 1.25V~10.5V regulator
2 .7 5 V
IN
12V C1 10mF
V IN
H T 1 1 1 7 -A D J
ADJ IA
DJ
VOUT V
REF
V R1 125W R2 1kW C2 10mF
OUT
C om m on S in g le p o in t G N D
C om m on
Rev. 1.00
4
August 7, 2007
HT1117 Series
* Digitally selected outputs
V
IN
V IN
H T 1 1 1 7 -A D J
ADJ
VOUT R1 125W C2 10mF
V
OUT
C1 10mF R2 R3 R4 R5 Rn
C om m on In p u ts N o te : R 2 c a n s e t th e m a x im u m v o lta g e . S in g le p o in t GND
C om m on
* High output current positive voltage regulator
T r1 V
IN
IC
1
V IN R1 C1 10mF
H T1117 S e r ie s
GND
VOUT IR
EG
V IO C2 10mF
OUT
C om m on
S in g le p o in t G N D V =
1 BE1
C om m on
R
IR IO = IC
EG
+ IR
IC
1 EG
,
(1 + b )
1
* Increased Output voltage Circuit
V
IN
V IN C1 10mF
H T1117 S e r ie s
IS
S
VOUT C2 10mF
V
OUT
GND
V
XX
R1
D1 C om m on S in g le p o in t G N D C om m on
VOUT = VXX + VD1 R1 = VXX ISS
Rev. 1.00
5
August 7, 2007
HT1117 Series
* Dual Supply Circuit
IC 1 V
IN
V IN
H T1117 S e r ie s
GND
VOUT V
OUT1
IC 2 V IN C1 10mF C om m on
V
XX1
C3 10mF
H T1117 S e r ie s
GND
VOUT V C2 10mF R1
OUT2
V
XX2
S in g le p o in t G N D
C om m on
VOUT1 = VXX2 + VXX1 VOUT2 = VXX2
* Tracking Voltage Regulator
V
IN
V IN C1 10mF
H T1117 S e r ie s
GND
VOUT C2 10mF R
A
V
OUT
S in g le p o in t G N D R
B
-V
IN
-V
O
-VO = VO x
RA RB
Rev. 1.00
6
August 7, 2007
HT1117 Series
Package Information
3-pin SOT-223 Outline Dimensions
E1 E
e e1
A2 A
A1
c b
Symbol A A1 A2 b C D E E1 e e1 L q
Dimensions in mm Min. 3/4 0.02 1.50 0.66 0.23 6.30 6.70 3.30 3/4 3/4 0.75 0 Nom. 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 2.3 4.6 3/4 3/4 Max. 1.8 0.10 1.70 0.84 0.35 6.70 7.30 3.70 3/4 3/4 3/4 10
Rev. 1.00
7
q L
D
g a u g e p la n e s e a tin g p la n e
August 7, 2007
HT1117 Series
Product Tape and Reel Specifications
Reel Dimensions
T2 D
A
B
C
T1
SOT-223 Symbol A B C D T1 T2 Description Reel Outer Diameter Reel Inner Diameter Spindle Hole Diameter Key Slit Width Space Between Flange Reel Thickness Dimensions in mm 3301 621.5 12.750.15 2+0.6 12.4+0.2 16.4-0.4
Rev. 1.00
8
August 7, 2007
HT1117 Series
Carrier Tape Dimensions
D
E F W C
P0
P1
t
B0
D1
P
K0 A0
SOT-223 Symbol W P E F D D1 P0 P1 A0 B0 K0 t C Description Carrier Tape Width Cavity Pitch Perforation Position Cavity to Perforation (Width Direction) Perforation Diameter Cavity Hole Diameter Perforation Pitch Cavity to Perforation (Length Direction) Cavity Length Cavity Width Cavity Depth Carrier Tape Thickness Cover Tape Width Dimensions in mm 120.3 80.1 1.750.1 5.50.05 1.5+0.1 1.5+0.1 40.1 20.05 6.90.1 7.50.1 2.10.1 0.30.05 9.3
Rev. 1.00
9
August 7, 2007
HT1117 Series
Holtek Semiconductor Inc. (Headquarters) No.3, Creation Rd. II, Science Park, Hsinchu, Taiwan Tel: 886-3-563-1999 Fax: 886-3-563-1189 http://www.holtek.com.tw Holtek Semiconductor Inc. (Taipei Sales Office) 4F-2, No. 3-2, YuanQu St., Nankang Software Park, Taipei 115, Taiwan Tel: 886-2-2655-7070 Fax: 886-2-2655-7373 Fax: 886-2-2655-7383 (International sales hotline) Holtek Semiconductor Inc. (Shanghai Sales Office) 7th Floor, Building 2, No.889, Yi Shan Rd., Shanghai, China 200233 Tel: 86-21-6485-5560 Fax: 86-21-6485-0313 http://www.holtek.com.cn Holtek Semiconductor Inc. (Shenzhen Sales Office) 5/F, Unit A, Productivity Building, Cross of Science M 3rd Road and Gaoxin M 2nd Road, Science Park, Nanshan District, Shenzhen, China 518057 Tel: 86-755-8616-9908, 86-755-8616-9308 Fax: 86-755-8616-9722 Holtek Semiconductor Inc. (Beijing Sales Office) Suite 1721, Jinyu Tower, A129 West Xuan Wu Men Street, Xicheng District, Beijing, China 100031 Tel: 86-10-6641-0030, 86-10-6641-7751, 86-10-6641-7752 Fax: 86-10-6641-0125 Holtek Semiconductor Inc. (Chengdu Sales Office) 709, Building 3, Champagne Plaza, No.97 Dongda Street, Chengdu, Sichuan, China 610016 Tel: 86-28-6653-6590 Fax: 86-28-6653-6591 Holtek Semiconductor (USA), Inc. (North America Sales Office) 46729 Fremont Blvd., Fremont, CA 94538 Tel: 1-510-252-9880 Fax: 1-510-252-9885 http://www.holtek.com
Copyright O 2007 by HOLTEK SEMICONDUCTOR INC. The information appearing in this Data Sheet is believed to be accurate at the time of publication. However, Holtek assumes no responsibility arising from the use of the specifications described. The applications mentioned herein are used solely for the purpose of illustration and Holtek makes no warranty or representation that such applications will be suitable without further modification, nor recommends the use of its products for application that may present a risk to human life due to malfunction or otherwise. Holteks products are not authorized for use as critical components in life support devices or systems. Holtek reserves the right to alter its products without prior notification. For the most up-to-date information, please visit our web site at http://www.holtek.com.tw.
Rev. 1.00
10
August 7, 2007

▲Up To Search▲

Price & Availability of HT1117-ADJ

	To Download HT1117-ADJ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .