View 2SC507506_4126122.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2SC5075
TOSHIBA Transistor Silicon NPN Triple Diffused Type
2SC5075
Switching Regulator and High-Voltage Switching Applications High-Speed DC-DC Converter Applications
Industrial Applications Unit: mm
* *
High-speed switching: tr = 1.0 s (max), tf = 1.0 s (max) High breakdown voltage: VCEO = 400 V
Absolute Maximum Ratings (Ta = 25C)
Characteristics Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Base current Collector power dissipation Junction temperature Storage temperature range Symbol VCBO VCEO VEBO IC IB PC Tj Tstg Rating 500 400 7 2 0.5 1.3 150 -55 to 150 Unit V V V A A W C C
JEDEC JEITA

TOSHIBA 2-8M1A Note: Using continuously under heavy loads (e.g. the application of high Weight: 0.55 g (typ.) temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
1
2006-11-10
2SC5075
Electrical Characteristics (Ta = 25C)
Characteristics Collector cut-off current Emitter cut-off current Collector-base breakdown voltage Collector-emitter breakdown voltage DC current gain Collector-emitter saturation voltage Base-emitter saturation voltage Rise time Symbol ICBO IEBO V (BR) CBO V (BR) CEO hFE VCE (sat) VBE (sat) ton IB1 Test Condition VCB = 400 V, IE = 0 VEB = 7 V, IC = 0 IC = 1 mA, IE = 0 IC = 10 mA, IB = 0 VCE = 5 V, IC = 0.1 A VCE = 5 V, IC = 1 A IC = 1 A, IB = 0.2 A IC = 1 A, IB = 0.2 A Output 250 Min 500 400 20 8 Typ. Max 100 1 1.0 1.5 1.0 V V Unit A mA V V
20 s
Input IB2
IB1 IB2
Switching time
Storage time
tstg
2.5
s
VCC 200 V Fall time tf IB1 = -IB2 = 0.08 A, duty cycle < 1% 1.0
Marking
C5075
Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish.
2
2006-11-10
2SC5075
IC - VCE
2.0 180 Common emitter Ta = 25C 2.0 Common emitter VCE = 5 V 1.6
IC - VBE
(A)
Collector current IC
1.2
80 60 40
Collector current IC
(A)
1.6
120
1.2
Ta = 100C
25
-55
0.8 20 0.4 0 0 0 2 4 6 8 10 12 14 16 IB = 10 mA
0.8
0.4
0 0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
Collector-emitter voltage
VCE (V)
Base-emitter voltage
VBE (V)
200
Collector-emitter saturation voltage VCE (sat) (V)
hFE - IC
DC current gain hFE
100 50 30 Ta = 100C 25 Common emitter VCE = 5 V
VCE (sat) - IC
3 Common emitter IC/IB = 5 Ta = -55C
1 0.5 0.3
10 5 3 0.01
-55
100 0.1 0.05 0.03 0.005 0.01 0.03 0.1 0.3 1 3 10 25
0.03
0.1
0.3
1
3
10
Collector current IC
(A)
Collector current IC
(A)
VBE (sat) - IC
10 5
PC - Ta
1.6
(W) Collector power dissipation PC
Ta = -55C 100 25
Common emitter IC/IB = 5
Base-emitter saturation voltage VBE (sat) (V)
3
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0
1 0.5 0.3
0.1 0.05 0.03 0.01 0.005 0.01 0.03 0.1 0.3 1 3 10
25
50
75
100
125
150
175
Collector current IC
(A)
Ambient temperature Ta (C)
3
2006-11-10
2SC5075
rth - tw
1000 500 300 Curves should be applied in thermal limited area. (single nonrepetitive pulse) Ta = 25C
Transient thermal resistance rth (C/W)
100 50 30
10 5 3
1 0.5 0.3
0.1 0.001
0.01
0.1
1
10
100
1000
Pulse width
tw (s)
Safe Operating Area
10 IC max (pulsed)* 3 IC max (continuous) 10 ms* 100 ms* DC operation Ta = 25C 1 ms*
1
(A) Collector current IC
0.3 0.1 0.03 0.01
*: Single nonrepetitive pulse Ta = 25C 0.003 Curves must be derated linearly with increase in temperature. 0.001 1 0.3 3 10
VCEO max 30 100 300 1000
Collector-emitter voltage
VCE (V)
4
2006-11-10
2SC5075
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
20070701-EN
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
5
2006-11-10

▲Up To Search▲

Price & Availability of 2SC507506

	To Download 2SC507506 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .