 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 19-0744; Rev 5; 10/07 KIT ATION EVALU BLE AVAILA Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers General Description The MAX9586-MAX9589 are small, low-power, multichannel video amplifiers with integrated reconstruction filters and input clamps. Specially suited for standarddefinition video signals, these devices are ideal for a wide range of television and set-top box applications. The video signals from the outputs of a digital-to-analog converter (DAC) are AC-coupled to the inputs of the MAX9586-MAX9589. External video signals, in which the DC bias is usually not known, can also be AC-coupled to the inputs of the MAX9586-MAX9589. The input sync-tip clamps set the DC level of composite video or luma signals, and the input bias circuits set the DC level of chroma signals. The reconstruction filter typically has 1dB passband flatness at 8.5MHz and 55dB attenuation at 27MHz. The amplifiers have 2V/V gain and the outputs can be DCcoupled to a 75 load, which is the equivalent of two video loads, or AC-coupled to a 150 load. The MAX9586-MAX9589 operate from a 2.7V to 3.6V single supply and are specified over the -40C to +125C automotive temperature range. The MAX9586-MAX9589 are offered in small SOT23 and MAX(R) packages. Features o Single- (MAX9586), Dual- (MAX9587), Triple- (MAX9588), and Quad- (MAX9589) Channel Devices o 8.5MHz, 1dB Passband o 55dB Attenuation at 27MHz o Fixed Gain of 2V/V o Low Power: 4.25mA per Channel o 2.7V to 3.6V Single-Supply Operation o Small SOT23 and MAX Packages MAX9586-MAX9589 Ordering Information PART MAX9586AZK+T MAX9587AZT+T MAX9588AUA+T MAX9589AUB+T PINPACKAGE 5 Thin SOT23-5 6 Thin SOT23-6 8 MAX-8 10 MAX-10 CHANNELS 1 2 3 4 PKG CODE Z5-1 Z6-1 U8-1 U10-2 Applications Set-Top Boxes Televisions MAX is a registered trademark of Maxim Integrated Products, Inc. Note: All devices are specified over the -40C to +125C operating temperature range. +Denotes a lead-free package. T = Tape and reel. Pin Configurations and Selector Guide located at end of data sheet. Block Diagrams UNKNOWN BIAS INA CLAMP MAX9588 AV = 2V/V OUTA 300mV LPF INB CLAMP LPF AV = 2V/V OUTB INC BIAS LPF AV = 2V/V OUTC Block Diagrams continued at end of data sheet. ________________________________________________________________ Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers MAX9586-MAX9589 ABSOLUTE MAXIMUM RATINGS VDD to GND ..............................................................-0.3V to +4V IN_ to GND ...............................................................-0.3V to +4V SHDN to GND...........................................................-0.3V to +4V OUT_ Short Circuit Duration to VDD, GND .................Continuous Continuous Input Current IN_, SHDN ....................................................................20mA Continuous Power Dissipation (TA = +70C) 5-Pin Thin SOT23 (derate 9.1mW/C above +70C) ....727mW 6-Pin Thin SOT23 (derate 9.1mW/C above +70C) ....727mW 8-Pin MAX (derate 4.5mW/C above +70C) .............362mW 10-Pin MAX (derate 5.6mW/C above +70C) ...........444mW Operating Temperature Range .........................-40C to +125C Junction Temperature ......................................................+150C Storage Temperature Range .............................-65C to +150C Lead Temperature (soldering, 10s) .................................+300C Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (VDD = 3.3V, GND = 0V, VRL = no load, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 1) PARAMETER Supply Voltage Range Supply Current Sync-Tip Clamp Level SYMBOL VDD IDD VCLP Per channel Sync-tip clamp VDD = 2.7V, sync-tip clamp input Input Voltage Range VIN Guaranteed by DC VDD = 2.7V, bias input voltage gain VDD = 3V, sync-tip clamp input VDD = 3V, bias input Sync Crush Input Clamping Current Maximum Input Source Resistance Bias Voltage Input Resistance VBIAS Bias circuit Bias circuit VDD = 2.7V, VIN = VCLP to (VCLP + 1.05V) VDD = 3V, VIN = VCLP to (VCLP + 1.2V) VDD = 2.7V, VIN = VBIAS 0.525V VDD = 3V, VIN = VBIAS 0.600V DC Gain Matching Output Level Guaranteed by DC voltage gain Measured at VOUT, IN_ = 0.1F to GND, RL = 150 to GND Sync-tip clamp Bias circuit 1.95 1.95 1.95 1.95 -2 0.2 0.40 Sync-tip clamp, percentage reduction in sync pulse (0.3VP-P), guaranteed by input clamping current measurement, measured at input Sync-tip clamp 1 300 0.50 11 2.00 2.00 2.00 2.00 0 0.3 1.3 2.04 2.04 V/V 2.04 2.04 +2 0.4 V % 0.62 0.24 CONDITIONS Guaranteed by PSRR MIN 2.7 4.25 TYP MAX 3.6 8 0.41 1.05 1.05 1.2 1.2 2 2 % A V k VP-P UNITS V mA V DC Voltage Gain (Note 2) AV RL = 150 to GND 2 _______________________________________________________________________________________ Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers ELECTRICAL CHARACTERISTICS (continued) (VDD = 3.3V, GND = 0V, VRL = no load, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 1) PARAMETER SYMBOL CONDITIONS Measured at output, VDD = 2.7V, VIN = VCLP to (VCLP + 1.05V), RL = 150 to -0.2V Measured at output, VDD = 2.7V, VIN = VCLP to (VCLP + 1.05V), RL = 150 to VDD/2 Sync-tip clamp Measured at output, VDD = 3V, VIN = VCLP to (VCLP + 1.2V), RL = 150 to -0.2V Measured at output, VDD = 3V, VIN = VCLP to (VCLP + 1.2V), RL = 150 to VDD/2 Measured at output, VDD = 3.135V, VIN = VCLP to (VCLP + 1.05V), RL = 75 to -0.2V Output-Voltage Swing Measured at output, VDD = 2.7V, VIN = VBIAS 0.525V, RL = 150 to -0.2V Measured at output, VDD = 2.7V, VIN = VBIAS 0.500V, RL = 150 to VDD/2 Bias Circuit Measured at output, VDD = 3V, VIN = VBIAS 0.600V, RL = 150 to -0.2V Measured at output, VDD = 3V, VIN = VBIAS 0.500V, RL = 150 to VDD/2 Measured at output, VDD = 3.135V, VIN = VBIAS 0.525V, RL = 75 to -0.2V Output Short-Circuit Current Output Resistance ROUT Short to GND (sourcing) Short to VDD (sinking) VOUT = 1.5V, -10mA ILOAD +10mA 2.1 MIN TYP 2.1 MAX UNITS MAX9586-MAX9589 2.1 2.4 2.4 2.1 VP-P 2.0 2.4 2.0 2.1 140 70 0.2 mA _______________________________________________________________________________________ 3 Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers MAX9586-MAX9589 ELECTRICAL CHARACTERISTICS (continued) (VDD = 3.3V, GND = 0V, VRL = no load, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 1) PARAMETER Power-Supply Rejection Ratio SYMBOL 2.7V VDD 3.6V f = 1MHz, 100mVP-P 1dB passband flatness Standard-Definition Reconstruction Filter VOUT_ = 2VP-P, reference frequency is 100kHz DG f = 5.5MHz f = 9.5MHz f = 27MHz CONDITIONS MIN 48 29 8.5 -0.15 -3 -55 0.1 % dB TYP MAX UNITS dB MHz Differential Gain 5-step modulated staircase of 129mV step size and 286mV peak-to-peak subcarrier amplitude, f = 4.43MHz 5-step modulated staircase of 129mV step size and 286mV peak-to-peak subcarrier amplitude, f = 4.43MHz 2T = 200ns, bar time is 18s; the beginning 2.5% and the ending 2.5% of the bar time are ignored 2T = 200ns 2T = 200ns, bar time is 18s; the beginning 2.5% and the ending 2.5% of the bar time are ignored 5-step staircase 100kHz f 5.5MHz, outputs are 2VP-P 100kHz f 5.5MHz f = 5.5MHz f = 4.43MHz Differential Phase DP 0.4 Degrees 2T Pulse-to-Bar K Rating 2T Pulse Response 2T Bar Response Nonlinearity Group Delay Distortion Peak Signal to RMS Noise Output Impedance All-Hostile Crosstalk 0.6 0.2 0.2 0 9 71 4.8 -64 K% K% K% % ns dB dB Note 1: All devices are 100% production tested at TA = +25C. Specifications over temperature limits are guaranteed by design. Note 2: Voltage gain (AV) is a two-point measurement in which the output-voltage swing is divided by the input-voltage swing. 4 _______________________________________________________________________________________ Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers Typical Operating Characteristics (VDD = SHDN = +3.3V, video outputs have RL = 150 connected to GND, TA = +25C, unless otherwise noted.) MAX9586-MAX9589 SMALL-SIGNAL GAIN vs. FREQUENCY VOUT = 100mVP-P MAX9586 toc01 SMALL-SIGNAL GAIN FLATNESS vs. FREQUENCY MAX9856 toc02 LARGE-SIGNAL GAIN vs. FREQUENCY VOUT = 2VP-P 0 -10 GAIN (dB) -20 -30 -40 -50 -60 -70 MAX9586 toc03 10 0 -10 GAIN (dB) 2 1 0 -1 GAIN (dB) VOUT = 100mVP-P 10 -20 -30 -40 -50 -60 -70 100k 1M 10M 100M FREQUENCY (Hz) -2 -3 -4 -5 -6 -7 -8 1M 10M FREQUENCY (Hz) 100M 100k 1M 10M 100M FREQUENCY (Hz) LARGE-SIGNAL GAIN FLATNESS vs. FREQUENCY MAX9856 toc04 GROUP DELAY vs. FREQUENCY MAX9586 toc05 POWER-SUPPLY REJECTION RATIO vs. FREQUENCY -10 -20 MAX9586 toc06 2 1 0 -1 GAIN (dB) -2 -3 -4 -5 -6 -7 -8 1M 10M FREQUENCY (Hz) VOUT = 2VP-P 120 100 80 DELAY (ns) 60 40 20 0 0 PSRR (dB) 100k 1M 10M 100M -30 -40 -50 -60 -70 -80 10k 100k 1M FREQUENCY (Hz) 10M 100M 100M FREQUENCY (Hz) QUIESCENT SUPPLY CURRENT vs. TEMPERATURE MAX9586 toc07 VOLTAGE GAIN vs. TEMPERATURE MAX9586 toc08 DIFFERENTIAL GAIN AND PHASE DIFFERENTIAL PHASE (deg) DIFFERENTIAL GAIN (%) 0 -0.1 -0.2 -0.3 -0.4 0.8 0.6 0.4 0.2 0 -0.2 -0.4 1 2 3 4 5 6 f = 4.43MHz 7 f = 4.43MHz MAX9586 toc09 7.0 QUIESCENT SUPPLY CURRENT (mA) 6.5 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 -50 -25 0 25 50 75 100 2.04 2.03 2.02 VOLTAGE GAIN (V/V) 2.01 2.00 1.99 1.98 1.97 1.96 1.95 0.1 125 -50 -25 0 25 50 75 100 125 1 2 3 4 5 6 7 TEMPERATURE (C) TEMPERATURE (C) _______________________________________________________________________________________ 5 Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers MAX9586-MAX9589 Typical Operating Characteristics (continued) (VDD = SHDN = +3.3V, video outputs have RL = 150 connected to GND, TA = +25C, unless otherwise noted.) 2T RESPONSE MAX9586 toc10 12.5T RESPONSE MAX9586 toc11 NTC-7 VIDEO TEST SIGNAL MAX9586 toc12 IN_ 200mV/div IN_ 200mV/div IN_ 500mV/div OUT_ 400mV/div OUT_ 400mV/div OUT_ 1V/div 100ns/div 400ns/div 10s/div PAL MULTIBURST RESPONSE MAX9586 toc13 PAL COLOR BARS MAX9586 toc14 FIELD SQUARE-WAVE RESPONSE MAX9586 toc15 IN_ 500mV/div IN_ 500mV/div IN_ 500mV/div OUT_ 1V/div OUT_ 1V/div OUT_ 1V/div 10s/div 10s/div 2ms/div INPUT-TO-INPUT CROSSTALK vs. FREQUENCY MAX9586 toc16 OUTPUT-TO-OUTPUT CROSSTALK vs. FREQUENCY MAX9586 toc17 OUTPUT IMPEDANCE vs. FREQUENCY MAX9586 toc18 0 -20 -40 GAIN (dB) 0 -20 -40 GAIN (dB) -60 -80 -100 -120 100 OUTPUT IMPEDANCE () 100k 1M 10M 100M 10 -60 -80 -100 -120 100k 1M 10M 100M FREQUENCY (Hz) 1 0.1 0.01 100k 1M FREQUENCY (Hz) 10M FREQUENCY (Hz) 6 _______________________________________________________________________________________ Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers Pin Description PIN MAX9586 5 SOT23 1 2 3 -- -- -- -- 4 -- -- -- -- 5 MAX9587 6 SOT23 -- 2 -- 3 1 -- -- -- 4 6 -- -- 5 MAX9588 8 MAX -- 4 -- 1 2 3 -- -- 7 6 5 -- 8 MAX9589 10 MAX -- 5 -- 1 2 3 4 -- 9 8 7 6 10 SHDN GND IN INA INB INC IND OUT OUTA OUTB OUTC OUTD VDD Active-Low Shutdown Input. Connect to GND to shut down. Ground Video Input Video Input A Video Input B Video Input C Video Input D Video Output Video Output A Video Output B Video Output C Video Output D Positive Power Supply. Bypass to GND with a 0.1F capacitor. NAME FUNCTION MAX9586-MAX9589 +3.3V VIDEO SWITCH CVBS SHDN VDD MAX9586 0.1F GND 3.3V 0.1F VIDEO DECODER 0.1F IN CLAMP LPF AV = 2V/V OUT 75 75 VDD MAX9587 LUMA VIDEO SWITCH 0.1F INA GND 3.3V 0.1F 0.1F CLAMP LPF AV = 2V/V OUTA 75 75 VIDEO DECODER 0.1F CHROMA INB 0.1F BIAS LPF AV = 2V/V OUTB 75 75 Figure 1. Typical Application Circuits for the MAX9586/MAX9587 (Anti-Alias Filter) _______________________________________________________________________________________ 7 Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers MAX9586-MAX9589 VDD MPEG DECODER VDD MAX9588 CVBS VDD 0.1F INA GND 75 3.3V 0.1F DAC CLAMP LPF AV = 2V/V OUTA CVBS DAC LUMA VDD 0.1F INB CLAMP LPF AV = 2V/V OUTB 75 Y DAC CHROMA 0.1F INC BIAS LPF AV = 2V/V OUTC 75 C VDD MPEG DECODER VDD MAX9589 CVBS 0.1F INA GND 75 3.3V 0.1F DAC CLAMP LPF AV = 2V/V OUTA CVBS1 0.1F VDD INB CLAMP LPF AV = 2V/V OUTB 75 CVBS2 DAC LUMA VDD 0.1F INC CLAMP LPF AV = 2V/V OUTC 75 Y DAC CHROMA 0.1F IND BIAS LPF AV = 2V/V OUTD 75 C Figure 2. Typical Application Circuits for the MAX9588/MAX9589 (Reconstruction Filter) 8 _______________________________________________________________________________________ Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers Detailed Description The MAX9586-MAX9589 filter and amplify the video DAC output in applications such as set-top boxes and televisions. These devices consist of input clamps, input bias circuits, lowpass filters, and gain of 2V/V output amplifiers capable of driving a standard 150 video load to ground. Outputs The video output amplifiers can both source and sink load current, allowing output loads to be DC- or ACcoupled. The amplifier output stage needs approximately 300mV of headroom from either supply rail. The devices have an internal level-shift circuit that positions the sync tip at approximately 300mV at the output. If the supply voltage is greater than 3.135V (5% below a 3.3V supply), each amplifier can drive two DC-coupled video loads to ground. If the supply is less than 3.135V, each amplifier can drive only one DC-coupled or AC-coupled video load. MAX9586-MAX9589 Inputs The input stages of the MAX9586-MAX9589 are either sync-tip clamps or bias circuits. Sync-tip clamps accept AC-coupled CVBS or luma video signals with sync pulses. The sync-tip voltage is internally set to 300mV. Bias circuit inputs accept AC-coupled chroma, a subcarrier modulated with the color information. The bias voltage of the bias circuits is approximately 500mV. Shutdown (MAX9586) The MAX9586 draws less than 1A supply current when SHDN is low. In shutdown mode, the amplifier output becomes high impedance. Video Filter The filter passband (1dB) is typically 8.5MHz, which makes the device suitable for standard-definition video signals from all sources (e.g., broadcast and DVD). Broadcast video signals are channel limited: NTSC signals have 4.2MHz bandwidth and PAL signals have 5MHz bandwidth. Video signals from a DVD player, however, are not channel limited, so the bandwidth of DVD video signals can approach the Nyquist limit of 6.75MHz. (Recommendation ITU-R BT.601-5 specifies 13.5MHz as the sampling rate for standard-definition video). Therefore, the maximum bandwidth of the signal is 6.75MHz. To ease the filtering requirements, most modern video systems oversample by two times, clocking the video current DAC at 27MHz. Applications Information AC-Coupling the Outputs The outputs can be AC-coupled since the output stage can source and sink current as shown in Figure 3. Coupling capacitors should be 220F or greater to keep the highpass filter, formed by the 150 equivalent resistance of the video transmission line, to a corner frequency of 4.8Hz or below. The frame rate of PAL systems is 25Hz, and the frame rate of NTSC systems is 30Hz. The corner frequency should be well below the frame rate. Power-Supply Bypassing and Ground The MAX9586-MAX9589 operate from a single-supply voltage down to 2.7V, allowing for low-power operation. Bypass VDD to GND with a 0.1F capacitor. Place all external components as close as possible to the device. _______________________________________________________________________________________ 9 Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers MAX9586-MAX9589 VDD MPEG DECODER VDD 3.3V 0.1F MAX9589 0.1F GND DAC CVBS INA CLAMP LPF AV = 2V/V OUTA 75 220F CVBS1 0.1F VDD INB CLAMP LPF AV = 2V/V OUTB 75 220F CVBS2 DAC LUMA VDD 0.1F INC CLAMP LPF AV = 2V/V OUTC 75 220F Y DAC CHROMA 0.1F IND BIAS LPF AV = 2V/V OUTD 75 220F C Figure 3. AC-Coupled Outputs 10 ______________________________________________________________________________________ Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers Block Diagrams (continued) MAX9586-MAX9589 SHDN UNKNOWN BIAS IN CLAMP MAX9586 OUT 300mV AV = 2V/V LPF MAX9587 INA OUTA CLAMP LPF AV = 2V/V INB BIAS LPF AV = 2V/V OUTB MAX9589 INA OUTA CLAMP LPF AV = 2V/V INB CLAMP LPF AV = 2V/V OUTB INC CLAMP LPF AV = 2V/V OUTC IND BIAS LPF AV = 2V/V OUTD ______________________________________________________________________________________ 11 Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers MAX9586-MAX9589 Pin Configurations TOP VIEW SHDN 1 + MAX9586 INA 5 VDD INB INC GND 1+ 2 3 4 8 7 VDD OUTA OUTB OUTC MAX9588 6 5 GND 2 MAX IN 3 4 OUT SOT23 INB 1 + 6 OUTB INA 1 INB 2 3 4 5 + 10 VDD 9 OUTA OUTB OUTC OUTD GND 2 MAX9587 5 VDD INC IND MAX9589 8 7 6 INA 3 4 OUTA GND SOT23 MAX Selector Guide PART MAX9586AZK+T MAX9587AZT+T MAX9588AUA+T PIN-PACKAGE 5 SOT23-5 6 SOT23-6 8 MAX-8 PACKAGE SIZE 2.9mm x 1.6mm 2.9mm x 1.6mm 3mm x 3mm CHANNELS 1 2 3 4 TOP MARK ADSH AADI -- -- 10 MAX-10 MAX9589AUB+T 3mm x 3mm Note: All devices are specified over the -40C to +125C operating temperature range. +Denotes a lead-free package. Chip Information PROCESS: BiCMOS 12 ______________________________________________________________________________________ Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers Package Information (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) MAX9586-MAX9589 ______________________________________________________________________________________ THIN SOT23.EPS 13 Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers MAX9586-MAX9589 Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) 14 ______________________________________________________________________________________ Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) 6L THIN SOT23.EPS MAX9586-MAX9589 ______________________________________________________________________________________ 15 Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers MAX9586-MAX9589 Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) 16 ______________________________________________________________________________________ Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) 8LUMAXD.EPS MAX9586-MAX9589 4X S 8 8 INCHES DIM A A1 A2 b MIN 0.002 0.030 MAX 0.043 0.006 0.037 MILLIMETERS MAX MIN 0.05 0.75 1.10 0.15 0.95 O0.500.1 E H 0.60.1 c D e E H L 1 1 0.60.1 S D BOTTOM VIEW 0.014 0.010 0.007 0.005 0.120 0.116 0.0256 BSC 0.120 0.116 0.198 0.188 0.026 0.016 6 0 0.0207 BSC 0.25 0.36 0.13 0.18 2.95 3.05 0.65 BSC 2.95 3.05 4.78 5.03 0.41 0.66 0 6 0.5250 BSC TOP VIEW A2 A1 A c e b L SIDE VIEW FRONT VIEW PROPRIETARY INFORMATION TITLE: PACKAGE OUTLINE, 8L uMAX/uSOP APPROVAL DOCUMENT CONTROL NO. REV. 21-0036 1 1 J ______________________________________________________________________________________ 17 Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers MAX9586-MAX9589 Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) 10LUMAX.EPS 1 1 e 10 4X S 10 INCHES MAX DIM MIN 0.043 A 0.006 A1 0.002 A2 0.030 0.037 0.120 D1 0.116 0.118 D2 0.114 0.120 E1 0.116 0.118 E2 0.114 0.199 H 0.187 L 0.0157 0.0275 L1 0.037 REF 0.0106 b 0.007 e 0.0197 BSC c 0.0035 0.0078 0.0196 REF S 0 6 MILLIMETERS MAX MIN 1.10 0.15 0.05 0.75 0.95 3.05 2.95 3.00 2.89 2.95 3.05 2.89 3.00 4.75 5.05 0.40 0.70 0.940 REF 0.177 0.270 0.500 BSC 0.090 0.200 0.498 REF 0 6 H O0.500.1 0.60.1 1 1 0.60.1 TOP VIEW BOTTOM VIEW D2 GAGE PLANE A2 A b A1 D1 E2 c E1 L1 L FRONT VIEW SIDE VIEW PROPRIETARY INFORMATION TITLE: PACKAGE OUTLINE, 10L uMAX/uSOP APPROVAL DOCUMENT CONTROL NO. REV. 21-0061 Revision History Pages changed at Rev 1: 1, 3, 24 Pages changed at Rev 2: 1-4, 13, 25 Pages changed at Rev 3: 1, 2, 7, 12-18 (deleted some package outlines) Pages changed at Rev 4: 1, 4, 5, 9, 18 Pages changed at Rev 5: 1, 18 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 18 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 (c) 2007 Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc. Heaney |
Price & Availability of MAX95860710
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |