 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| marlow industries inc.(R) Thermoelectric Cooler Performance Values Hot Side Temperature (C) Tmax (C-dry N2): Qmax (watts): Imax (amps): Vmax (vdc): AC Resistance (ohms): 27C 64 5.2 1.8 4.4 2.1 50C 73 5.8 1.8 4.9 --- MI1025T Mechanical Characteristics Positive Lead .346 [8.79] Leads: 28 AWG Bus Solid Tinned Copper Negative Lead .432 [10.97] 2.00 +/-.25 [50.80+/-6.35] .085+/-.005 [2.16 +/-.13] Cold Side .004[0.10] A .001[0.03] .001[0.03] Ceramic Material: Alumina (AC) Millimeters are in [ ] A Ordering Options MI1025T-01 MI1025T-02 MI1025T-03 both surfaces are metallized hot side exterior is metallized no metallization * * * * For example, and MI1025T with only the hot side metallized is specified as an MI1025T-02AC Pretinned metallized ceramic surface(s) with 117C solder. Thermistor mounted on edge of cold side ceramic. (Calibration available.) Elevated temperature burn-in with test data provided. 102-0021, Rev D Thermoelectric Cooler Performance Curves Hot Side Temperature: 27C 80.0 MI1025T Environment: One atmosphere dry nitrogen Hot Side Temperature: 50C HEAT LOAD (WATTS) 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 80.0 60.0 T (C) 60.0 T (C) 40.0 40.0 20.0 20.0 0.0 4.0 VOLTAGE (VDC) 0.0 5.0 VOLTAGE (VDC) 4.0 3.0 2.0 1.0 0.4 0.8 1.2 CURRENT (AMPS) 1.6 2.0 HEAT LOAD (WATTS) 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 3.0 2.0 1.0 0.0 0.0 Q=0 T=0 Q=0 T=0 0.4 0.8 1.2 CURRENT (AMPS) 1.6 2.0 0.0 0.0 For performance information in a vacuum or with hot side temperatures other than 27C or 50C, consult one of our Applications Engineers. Installation Recommended mounting methods: Bonding with thermal epoxy or soldering with metallized ceramics. For additional information, please refer to our TEC Installation Guide. Operation Cautions For maximum reliability, storage and operation below 85C in a non-condensing environment is recommended. To minimize thermal stress, use linear/proportional temperature control or a similar method rather than an ON/OFF method. Marlow Industries, Inc. 10451 Vista Park Road Dallas Texas 75238-1645 TEL: 214-340-4900 FAX: 214-341-5212 Internet: http://www.marlow.com Marlow Industries Europe Aberdeen House, South Road Haywards Heath West Sussex RH164NG UK TEL: +44 (0)1444-443404 FAX: +44 (0)1444-443334 Marlow Industries Asia 1-1-8-401 Uehara, Shibuya-ku Tokyo, Japan 151-0064 TEL: +81 (3) 5454-5280 FAX: +81 (3) 5454-5281 Copyright 2000, Marlow Industries, Inc. Marlow Industries reserves the right to change the design and specifications of products without notice. 102-0021, Rev D |
Price & Availability of MI1025T-01
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |