 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TC7MP01FK TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7MP01FK Low-Voltage Triple Gate(6-input AND + 4-input OR + inverter) The TC7MP01FK is a high-performance CMOS triple gate (6-input AND + 4-input OR + inverter). Desinged for use in 1.8 V, 2.5 V, or 3.3 V systems, it achieves high-speed operation while maintaining the CMOS low power dissipation. It is also designed with overvoltage tolerant inputs and outputs up to 3.6V. All inputs are equipped with protection circuits against static discharge. Weight : 0.03 g (typ.) Features * * * Low-voltage operation High-speed operation : VCC = 1.65 to 3.6V : 6 input AND tpd=3.7ns(max)(Vcc=3.30.3V) tpd=5.5ns(max)(Vcc=2.50.2V) tpd=11.0ns(max)(Vcc=1.80.15V) 4 input OR tpd=3.5ns(max)(Vcc=3.30.3V) tpd=5.0ns(max)(Vcc=2.50.2V) tpd=10.0ns(max)(Vcc=1.80.15V) INV. tpd=3.8ns(max)(Vcc=3.30.3V) tpd=5.2ns(max)(Vcc=2.50.2V) tpd=9.5ns(max)(Vcc=1.80.15V) * Output current : IOH/IOL=12mA(min)(Vcc=3.0V) : IOH/IOL=9mA(min)(Vcc=2.3V) : IOH/IOL=2mA(min)(Vcc=1.65V) * * * * Latch-up performance ESD performance Ultra-small package : 300mA : Machine model 200 V Human body model 2000 V : VSSOP(US16) Quiescent supply current : ICC = 2A(max)(Vcc=3.6V) Power-down protection provided on all inputs and outputs. 1 2007-10-19 TC7MP01FK Pin Assighment (top view) A B C D E F G GND 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 Vcc Y1 H I J Y3 K Y2 IEC Logic Symbol A B C D E F G H I J K 1 2 3 4 5 6 7 14 13 12 10 1 11 Y3 >1 9 Y2 & 15 Y1 Truth Table (AND Logic) A L x x x x x H B x L x x x x H C x x L x x x H D x x x L x x H E x x x x L x H F x x x x x L H Y1 L L L L L L H Truth Table (OR Logic) G H x x x L H x H x x L I x x H x L J x x x H L Y2 H H H H L Truth Table (INV. Logic) K L H Y3 H L 2 2007-10-19 TC7MP01FK Absolute Maximum Ratings (Note 1) Characteristics Power supply voltage DC input voltage DC output voltage Input diode current Output diode current DC output current DC Vcc/ground current Power dissipation Storage temperature Symbol Vcc VIN VOUT IIK IOK IOUT ICC/IGND PD Tstg Rating -0.5 to 4.6 -0.5 to 4.6 -0.5 to 4.6 (Note 2) Unit V V V mA (Note 4) mA mA mA mW -0.5 to Vcc+0.5 (Note 3) -50 50 50 100 180 -65 to 150 Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 2: Vcc=0V Note 3: High or low state. Note 4: VOUT Operating Ranges (Note 1) Characteristics Power supply voltage DC input voltage DC output voltage Symbol Vcc VIN VOUT Rating 1.65 to 3.6 1.2 to 3.6 (Note 2) -0.3 to 3.6 0 to 3.6 (Note 3) 0 to Vcc (Note 4) 12 Output current IOH/IOL 9 2 Operating Temperature Input rise and fall time Topr dt / dv -40 to 85 0 to 10 (Note 8) (Note 5) (Note 6) (Note 7) ns/V mA Unit V V V Note 1: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND. Note 2: Data retention only Note 3: Vcc=0V Note 4: High or low state Note 5: Vcc=3.0 to 3.6V Note 6: Vcc=2.3 to 2.7V Note 7: Vcc=1.65 to 1.95V Note 8: VIN=0.8 to 2.0V,Vcc=3.0V 3 2007-10-19 TC7MP01FK Electrical Characteristics DC Characteristics (Ta=-40 to 85, 2.7V Output voltage DC Characteristics (Ta=-40 to 85, 2.3VVcc2.7V) Characteristics Input voltage H-level L-level Symbol VIH VIL Test condition IOH=-100uA H-level Output voltage VIN= VIH orVIL V0H VIN= VIH orVIL IOH= -3mA IOH= -6mA IOH= -9mA IOL= 100uA IOL= 6mA IOL= 9mA Input leakage current Power-off leakage current Quiescent supply current IOFF ICC VIN=0 to 3.6V VIN,VOUT=0 to 3.6V VIN=VCC or GND Vcc(V) 2.3 to 2.7 2.3 to 2.7 2.3 to 2.7 2.3 2.3 2.3 2.3 to 2.7 2.3 2.3 2.3 to 2.7 0 2.3 to 2.7 Min 1.6 Vcc-0.2 2.0 1.8 1.7 Max 0.7 0.2 0.4 0.6 2.0 2.0 2.0 A A A V Unit V L-level V0L 4 2007-10-19 TC7MP01FK DC Characteristics (Ta=-40 to 85, 1.65VVcc<2.3V) Characteristics Input voltage H-Level L-Level H-Level Output voltage L-Level Input leakage current Power-off leakage current Quiescent supply current V0L IIN IOFF ICC Symbol VIH VIL V0H VIN= VIH orVIL VIN= VIH orVIL Test condition IOH=-100uA IOH=-2mA IOL=2mA Vcc(V) 1.65 to 2.3 1.65 to 2.3 1.65 1.65 1.65 1.65 0 1.65 Min 0.7xVcc Vcc-0.2 1.3 Max 0.13xVcc 0.2 2.0 2.0 2.0 A A A V Unit V VIN=0 to 3.6V VIN,VOUT=0 to 3.6V VIN=VCC or GND AC Characteristics (Ta=-40 to 85,Input: tr=tf=2.0ns, CL=30pF, RL=500) Characteristics Symbol Test condition Vcc(V) 1.80.15 6 input AND 2.50.2 3.30.3 tpLH tpHL Figure 1, Figure 2 1.80.15 2.50.2 3.30.3 1.80.15 INV. 2.50.2 3.30.3 1.80.15 Output to output skew tosLH tosHL (Note) 2.50.2 3.30.3 Min 1.0 0.8 0.6 1.0 0.8 0.6 1.0 0.8 0.6 Max 11.0 5.5 3.7 10.0 5.0 3.5 9.5 5.2 3.8 0.5 0.5 0.5 ns ns Unit Propagation delay time 4 input OR For CL=50pF, add approximately 300ps to the AC maximum specification. Note: Parameter guaranteed by design. (tosLH=|tpLHm-tpLHn|, tosHL=|tpHLm-tpHLn|) 5 2007-10-19 TC7MP01FK Capacitive Characteristics(Ta=25) Characteristics Input Capacitance Symbol CIN 6 input AND Power dissipation capacitance CPD 4 input OR INV. fin=10MHz Table1, (Note) Test Condition Vcc(V) 1.8, 2.5, 3.3 1.8, 2.5, 3.3 1.8, 2.5, 3.3 1.8, 2.5, 3.3 Typ. 6 18 17 14 pF Unit pF Note: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation. ICC(opr) =CPDVCCVIN+ICC/3 (per gate) Table1 CPD Test Condition Function 1 6 input AND 4 input OR INV. P X X 2 H X X 3 H X X 4 H X X 5 H X X 6 H X X 7 X P X 8 G G G Pin 9 O C O 10 X X P 11 O O C 12 X L X 13 X L X 14 X L X 15 C O O 16 V V V -Symbol explanationV=VCC(+3.3V) G=GND(0V) H=Logic1(VCC) L=Logic0(GND) X=Don't care(Fixed to VCC or GND) O=Open C=Connect a condenser(30pF) between output terminal and GND. P=Input pulse with 50% duty cycle. 6 2007-10-19 TC7MP01FK AC Test Circuit Output CL RL Measure CL = 30 pF RL = 500 Figure 1 AC Waveform tr 2.0 ns Input (A) tf 2.0 ns 90% VM 10% VM Output (Y) tpLH tpHL VOL VIH GND VOH Symbol VIH VM Vcc 3.30.3V 2.7V 1.5V 2.50.2V Vcc Vcc/2 1.80.15V Vcc Vcc/2 Figure 2 tpLH, tpHL 7 2007-10-19 TC7MP01FK Package Dimensions Weight: 0.03 g (typ.) 8 2007-10-19 TC7MP01FK RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN GENERAL * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 9 2007-10-19 |
Price & Availability of TC7MP01FK
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |