 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TC7MZ273FK TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7MZ273FK Low-Voltage Octal D-Type Flip-Flop with Clear with 5-V Tolerant Inputs and Outputs The TC7MZ273FK is a high-performance CMOS octal D-type flip-flop. Designed for use in 3.3-V systems, it achieves high-speed operation while maintaining CMOS low power dissipation. The device is designed for low-voltage (3.3-V) applications, but can also be used to interface both inputs and outputs with a 5-V supply environment. D-input signal is sent to Q-output when clock rises. Clear input is Low-active and all flip-flop outputs are reset Low. All inputs are equipped with protection circuits to guard against static discharge. Weight: 0.03 g (typ.) Features * * * * * * * Low voltage operation: VCC = 2.0 V~3.6 V High-speed operation: tpd = 8.5 ns (max) (VCC = 3.0 V~3.6 V) Output current: |IOH|/IOL = 24 mA (min) (VCC = 3.0 V) Latch-up performance: -500 mA Package: VSSOP (US20) Power-down protection is provided for all inputs and outputs. Pin and function compatible with the 74 Series (74AC/VHC/HC/F/ALS/LS etc.) 273 type. 1 2007-10-19 TC7MZ273FK Pin Assignment (top view) IEC Logic Symbol (1) (11) CLR Q1 D1 D2 Q2 Q3 D3 D4 Q4 1 2 3 4 5 6 7 8 9 20 19 18 17 16 15 14 13 12 11 VCC Q8 D8 D7 Q7 Q6 D6 D5 Q5 CK CLR CK R C1 D1 D2 D3 D4 D5 D6 D7 D8 (3) (4) (7) (8) (13) (14) (17) (18) 1D (2) (5) (6) (9) (12) (15) (16) (19) Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 GND 10 Truth Table Inputs Outputs CLR L H H H D X L H X CK X Q L L H Qn Function Clear No change X: Don't care System Diagram D1 3 DR D2 4 DR D3 7 DR D4 8 DR D5 13 DR D6 14 DR D7 17 DR D8 18 DR CLR 1 CK CK 11 Q CK Q CK Q CK Q CK Q CK Q CK Q CK Q 2 Q1 5 Q2 6 Q3 9 Q4 12 Q5 15 Q6 16 Q7 19 Q8 2 2007-10-19 TC7MZ273FK Absolute Maximum Ratings (Note 1) Characteristics Supply voltage range DC input voltage DC output voltage Input diode current Output diode current DC output current Power dissipation DC VCC/ground current Storage temperature Symbol VCC VIN VOUT IIK IOK IOUT PD ICC/IGND Tstg Rating -0.5~7.0 -0.5~7.0 -0.5~7.0 (Note 2) -0.5~VCC + 0.5 (Note 3) -50 50 50 Unit V V V mA (Note 4) mA mA mW mA C 180 100 -65~150 Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 2: Output in off-state Note 3: High or low state. IOUT absolute maximum rating must be observed. Note 4: VOUT < GND, VOUT > VCC Operating Ranges (Note 1) Characteristics Supply voltage Input voltage Output voltage Symbol VCC VIN VOUT Rating 2.0~3.6 -1.5~3.6 (Note 2) Unit V V (Note 3) (Note 4) (Note 5) (Note 6) V 0~5.5 0~5.5 0~VCC 24 12 -40~85 Output current Operating temperature Input rise and fall time IOH/IOL Topr dt/dv mA C 0~10 (Note 7) ns/V Note 1: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND. Note 2: Data retention only Note 3: Output in off state Note 4: High or low state Note 5: VCC = 3.0~3.6 V Note 6: VCC = 2.7~3.0 V Note 7: VIN = 0.8~2.0 V, VCC = 3.0 V 3 2007-10-19 TC7MZ273FK Electrical Characteristics DC Characteristics (Ta = -40~85C) Characteristics High level Low level Symbol VIH VIL Test Condition VCC (V) 2.7~3.6 2.7~3.6 2.7~3.6 2.7 3.0 3.0 2.7~3.6 2.7 3.0 3.0 2.7~3.6 0 2.7~3.6 2.7~3.6 2.7~3.6 Min 2.0 Max Unit Input voltage 0.8 V IOH = -100 A High level VOH VIN = VIH or VIL IOH = -12 mA IOH = -18 mA Output voltage IOH = -24 mA IOL = 100 A Low level VOL VIN = VIH or VIL IOL = 12 mA IOL = 16 mA IOL = 24 mA Input leakage current Power off leakage current Quiescent supply current Increase in ICC per input IIN IOFF ICC ICC VCC - 0.2 2.2 2.4 2.2 V 0.2 0.4 0.4 0.55 5.0 A A VIN = 0~5.5 V VIN/VOUT = 5.5 V VIN = VCC or GND VIN = 3.6~5.5 V VIN = VCC - 0.6 V 10.0 10.0 10.0 A 500 AC Characteristics (Ta = -40~85C) Characteristics Symbol Test Condition VCC (V) 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 (Note) 2.7 3.3 0.3 Min Max Unit Maximum clock frequency fMAX tPLH tPHL tPHL tw (H) tw (L) tw (L) Figure 1, Figure 2 150 MHz Propagation delay time (CK-Q) Figure 1, Figure 2 9.5 8.5 9.5 8.5 1.5 ns Propagation delay time ( CLR -Q) Figure 1, Figure 3 1.5 3.3 3.3 3.3 3.3 2.5 2.5 1.5 1.5 2.5 2.0 ns Minimum pulse width (CK) Figure 1, Figure 2 ns Minimum bus width ( CLR ) Figure 3 ns Minimum set-up time ts Figure 1, Figure 2 ns Minimum hold time th Figure 1, Figure 2 ns Minimum removal time trem tosLH tosHL Figure 4 ns Output to output skew 1.0 ns Note: This parameter is guaranteed by design. (tosLH = |tpLHm - tpLHn|, tosHL = |tpHLm - tpHLn|) 4 2007-10-19 TC7MZ273FK Dynamic Switching Characteristics (Ta = 25C, Input: tr = tf = 2.5 ns, CL = 50 pF, RL = 500 ) Characteristics Quiet output maximum dynamic Quiet output minimum dynamic VOL VOL Symbol VOLP |VOLV| Test Condition VIH = 3.3 V, VIL = 0 V VIH = 3.3 V, VIL = 0 V VCC (V) 3.3 3.3 Typ. 0.8 0.8 Unit V V Capacitive Characteristics (Ta = 25C) Characteristics Input capacitance Output capacitance Power dissipation capacitance Symbol CIN COUT CPD fIN = 10 MHz Test Condition VCC (V) 3.3 0 (Note) 3.3 Typ. 7 8 25 Unit pF pF pF Note: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption. Average operating current can be obtained by the equation: ICC (opr) = CPDVCCfIN + ICC/8 (per bit) 5 2007-10-19 TC7MZ273FK AC Test Circuit Output CL RL Measure CL = 50 pF RL = 500 Figure 1 AC Waveform tr 2.5 ns Input (CK) tf 2.5 ns 2.7 V GND tr 2.5 ns Input (D) 90% 10% 1.5 V ts (H) th (H) ts (L) th (L) GND VOH 1.5 V tpHL tpLH VOL tf 2.5 ns tw (H) tw (L) 2.7 V 90% 1.5 V 10% Output (Q) Figure 2 tpLH, tpHL, tw, ts, th Input ( CLR ) tw (L) VIH 1.5 V GND Input ( CLR ) tr 2.5 ns 90% 1.5 V 10% tr 2.5 ns VIH GND VIH GND Output (Q) tpHL VOH 1.5 V VOL Output (CK) 90% 10% trem 1.5 V Figure 3 tpLH, tpHL Figure 4 trem 6 2007-10-19 TC7MZ273FK Package Dimensions Weight: 0.03 g (typ.) 7 2007-10-19 TC7MZ273FK RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN GENERAL * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 8 2007-10-19 |
Price & Availability of TC7MZ273FK07
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |