Part Number Hot Search : 
00005 4361F DN8899 SI4324DY LCE10A 2KN10 16244 LS3550
Product Description
Full Text Search
 

To Download HMC231G707 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 HMC231G7
v02.1006
GaAs MMIC SMT HIGH ISOLATION SPST SWITCH, DC - 6.0 GHz
Features
Isolation: 55 dB @ 2.0 GHz 42 dB @ 6.0 GHz Insertion Loss: 2.0 dB Typical @ 6.0 GHz Non-Reflective Input/Output Hermetic Surface Mount Package
Typical Applications
The HMC231G7 is ideal for: * Telecom Infrastructure * Microwave Radio & VSAT * Military Radios, Radar & ECM * Space Systems * Test Instrumentation
9
SWITCHES - SMT
Functional Diagram
General Description
The HMC231G7 is a broadband high isolation nonreflective GaAs MESFET SPST switch in a hermetic surface mount package. Covering DC to 6.0 GHz, the switch features >55 dB isolation up to 2 GHz and >42 dB isolation up to 6.0 GHz. The switch operates using complementary negative control voltage logic lines of -5/0V and requires no bias supply. When the "OFF" state is selected, both RF1 and RF2 ports are terminated in 50 Ohms.
Electrical Specifications, TA = +25 C, With 0/-5V Control, 50 Ohm System
Parameter Insertion Loss Frequency DC - 2.0 GHz DC - 4.0 GHz DC - 6.0 GHz DC - 2.0 GHz DC - 4.0 GHz DC - 6.0 GHz "On State" DC - 2.0 GHz DC - 4.0 GHz DC - 6.0 GHz DC - 2.0 GHz DC - 4.0 GHz DC - 6.0 GHz 0.5 - 6.0 GHz 0.5 - 6.0 GHz 23 50 43 37 Min. Typ. 1.3 1.4 2.0 55 48 42 17 15 12 15 13 12 27 49 Max. 1.6 1.7 2.4 Units dB dB dB dB dB dB dB dB dB dB dB dB dBm dBm
Isolation
Return Loss
Return Loss
"Off State"
Input Power for 1 dB Compression Input Third Order Intercept (Two-Tone Input Power= +7 dBm Each Tone, 1 MHz Tone Separation) Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF)
DC - 6.0 GHz
3 6
ns ns
9 - 54
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC231G7
v02.1006
GaAs MMIC SMT HIGH ISOLATION SPST SWITCH, DC - 6.0 GHz
Insertion Loss
0
Isolation
0 -10
-1 INSERTION LOSS (dB) -20 ISOLATION (dB)
+25 C +85 C -40 C
-2
-30 -40 -50 -60 -70 -80
-3
-4
-5 0 1 2 3 4 5 6 7 FREQUENCY (GHz)
0
1
2
3
4
5
6
7
9
SWITCHES - SMT
9 - 55
FREQUENCY (GHz)
Return Loss
0
RF1 ON RF1 OFF RF2 ON RF2 OFF
0.1 and 1 dB Input Compression Point
35
-5 RETURN LOSS (dB)
30 P1dB (dBm)
-10
25
-15
20 -20
1 dB Compression Point 0.1 dB Compression Point
-25 0 1 2 3 4 5 6 7 FREQUENCY (GHz)
15 0 1 2 3 4 5 6 7 FREQUENCY (GHz)
Input Third Order Intercept Point
60 55 50 IP3 (dBm) 45 40 35 30 0 1 2 3 4 5 6 7 FREQUENCY (GHz)
+ 25C + 85C - 40C
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC231G7
v02.1006
GaAs MMIC SMT HIGH ISOLATION SPST SWITCH, DC - 6.0 GHz
Absolute Maximum Ratings
RF Input Power (Vctl= -5V) (0.5 - 6 GHz) Control Voltage Range (A & B) Channel Temperature Thermal Resistance (RTH) (junction to lead) Storage Temperature Operating Temperature +30 dBm (@ +50 C) +1.0V to -7.5 Vdc 150 C 94 C/W
Control Voltages
State Low High Bias Condition 0 to -0.2V @ 10 uA Max. -5V @ 10 uA Typ. to -7V @ 45 uA Typ.
Truth Table
-65 to +150 C -40 to +85 C Class 1A A High Low Control Input B Low High Signal Path State RF1 to RF2 ON OFF
9
SWITCHES - SMT
ESD Sensitivity (HBM)
ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS
Caution: Do not "Hot Switch" power levels greater than +27 dBm (Vctl = 0/-5 Vdc).
Outline Drawing
NOTES: 1. PACKAGE BODY MATERIAL: WHITE ALUMINA 92% 2. CONDUCTOR TRACES MATERIAL: THICK FILM TUNGSTEN. 3. LEAD, BASE, COVER MATERIAL: KOVARTM. 4. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN, OVER ELECTROLYTIC NICKEL 50 MICROINCHES MIN. 5. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]. 6. TOLERANCES: .005 [0.13] UNLESS OTHERWISE SPECIFIED. 7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
9 - 56
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC231G7
v02.1006
GaAs MMIC SMT HIGH ISOLATION SPST SWITCH, DC - 6.0 GHz
Suggested Driver Circuit
9
SWITCHES - SMT
9 - 57
Pin Descriptions
Pin Number 1, 3 Function RF2, RF1 Description This pin is DC coupled and matched to 50 Ohm. Blocking capacitors are required if RF line potential is not equal to 0V. Package bottom must also be connected to PCB RF ground. Interface Schematic
2, 4, 7
GND
5
A
See truth table and control voltage table.
6
B
See truth table and control voltage table.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC231G7
v02.1006
GaAs MMIC SMT HIGH ISOLATION SPST SWITCH, DC - 6.0 GHz
Evaluation PCB
9
SWITCHES - SMT
List of Materials for Evaluation PBC 107746 [1]
Item J1 - J2 J3 - J4 R1, R2 U1 PCB [2] Description PCB Mount SMA RF Connector DC Pin 100 Ohm Resistor, 0603 Pkg. HMC231G7 SPDT Switch 107744 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and package bottom should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request.
9 - 58
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC231G7
v02.1006
GaAs MMIC SMT HIGH ISOLATION SPST SWITCH, DC - 6.0 GHz
Notes:
9
SWITCHES - SMT
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
9 - 59


▲Up To Search▲   

 
Price & Availability of HMC231G707

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X