![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HWS410 GaAs DC-6 GHz DPDT Switch September 2006 V3 Features * Low Insertion Loss : 0.8 dB @ 2.50 GHz * * * * * QFN12L (3 x 3 mm) 1.0 dB @ 5.85 GHz Isolation: 29.5 dB @ 2.50 GHz 20.5 dB @ 5.85 GHz Low DC Power Consumption Miniature QFN12L (3x3 mm) Plastic Lead (Pb) Free Package PHEMT process Lead Free and RoHS Compliant Version of HWS383 Description The HWS410 is a GaAs PHEMT MMIC DPDT switch operating at DC-6 GHz in a low cost miniature QFN12L (3 x 3 mm) plastic lead (Pb) free package. The HWS410 features low insertion loss and high isolation with very low DC power consumption. This switch can be used in IEEE 802.11a/b/g WLAN systems for combination of transmit/receive and antenna diversity functions. Electrical Specifications at 25 with 0, +3V Control Voltages C Parameter Insertion Loss Test Conditions 0.10-6.00 GHz 2.40-2.50 GHz 5.15-5.85 GHz 0.10-6.00 GHz 2.40-2.50 GHz 5.15-5.85 GHz 0.10-6.00 GHz 2.40-2.50 GHz 5.15-5.85 GHz 2.00-6.00 GHz 20 dBm Per Tone @ 2.50 GHz 22 dBm Per Tone @ 5.85 GHz 27.0 18.0 Min. Typ. 1.0 0.8 1.0 20.0 29.5 20.5 15 20 18 33 52 52 5 200 Max. Unit dB dB dB dB dB dB dB dB dB dBm dBm dBm uA 1.0 1.3 Isolation Return Loss Input Power for One dB Compression Input Third Order Intermodulation Intercept Point Control Current Note: All measurements made in a 50 ohm system with 0/+3.0V control voltages, unless otherwise specified. Hexawave Inc. 2 Prosperity Road II, Science-Based Industrial Park, Hsinchu, Taiwan. TEL 886-3-578-5100 FAX 886-3-577-0512 http://www.hw.com.tw All specifications are subject to change without notice. HWS410 GaAs DC-6 GHz DPDT Switch September 2006 V3 Typical Performance Data with 8pF Capacitors @ +25C Insertion Loss vs Frequency -0.4 -0.6 -0.8 -1.0 -1.2 Absolute Maximum Ratings Parameter RF Input Power Control Voltage Operating Temperature Storage Temperature Absolute Maximum +34 dBm @ +3V +6V -40 to +85C C -65 to +150 C C Insertion Loss(dB) Pin Out (Top View) TX RX 11 CB -1.4 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Frequency(GHz) 5.5 6.0 12 GND 10 9 8 7 Isolation vs Frequency -10 -15 Isolation(dB) VC1 GND 1 GND 2 3 4 5 6 CB GND GND VC2 -20 CB GND -25 -30 -35 -40 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Frequency(GHz) 5.5 6.0 ANT1 Note: 1. DC blocking capacitors CB=8pF are required on all RF ports. 2. Exposed pad in the bottom must be connected to ground by via holes. 3. TX and RX ports can be used interchangeably. Return Loss vs Frequency -10 -15 Return Loss(dB) Logic Table for Switch On-Path State 1 2 VC1 0 1 VC2 1 0 ANT1 TX RX ANT2 RX TX -20 -25 -30 -35 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Frequency(GHz) 5.5 6.0 `1' = +3V to +5V `0' = 0V to +0.2V Hexawave Inc. 2 Prosperity Road II, Science-Based Industrial Park, Hsinchu, Taiwan. TEL 886-3-578-5100 FAX 886-3-577-0512 http://www.hw.com.tw All specifications are subject to change without notice. ANT2 CB |
Price & Availability of HWS410
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |