View STW30NF20_4146402.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STP30NF20 - STB30NF20 STW30NF20
N-channel 200V - 0.065 - 30A - TO-220/TO-247/D2PAK Low gate charge STripFETTM Power MOSFET
Features
Type STP30NF20 STW30NF20 STB30NF20

VDSS 200V 200V 200V
RDS(on) 0.075 0.075 0.075
ID 30A 30A 30A
PTOT 125W 125W 125W TO-247
1
3 2 1
3 1 2
Gate charge minimized 100% avalanche tested Excellent figure of merit (RDS*Qg) Very good manufactuing repeability Very low intrinsic capacitances
3
TO-220
DPAK
Application
Figure 1.
Internal schematic diagram
Switching applications
Description
This Power MOSFET series realized with STMicroelectronics unique STripFET process has specifically been designed to minimize input capacitance and gate charge. It is therefore suitable as primary switch in advanced highefficiency isolated DC-DC converters.
Table 1.
Device summary
Marking 30NF20 30NF20 30NF20 Package TO-220 TO-247 DPAK Packaging Tube Tube Tape & reel
Order codes STP30NF20 STW30NF20 STB30NF20
October 2007
Rev 2
1/16
www.st.com 16
Contents
STP30NF20 - STW30NF20 - STB30NF20
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) ............................ 6
3 4 5 6
Test circuit
................................................ 9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2/16
STP30NF20 - STW30NF20 - STB30NF20
Electrical ratings
1
Electrical ratings
Table 2.
Symbol VDS VGS ID ID IDM
(1)
Absolute maximum ratings
Parameter Drain-source voltage (VGS = 0) Gate-source voltage Drain current (continuous) at TC = 25C Drain current (continuous) at TC=100C Drain current (pulsed) Total dissipation at TC = 25C Derating factor Value 200 20 30 19 120 125 1 10 -55 to 150 300 Unit V V A A A W W/C V/ns C C
PTOT dv/dt(2) TJ Tstg Tl
Peak diode recovery voltage slope Operating junction temperature Storage temperature Maximum lead temperature for soldering purpose
1. Pulse width limited by safe operating area 2. ISD 30A, di/dt 200A/s, VDD = 80%V(BR)DSS
Table 3.
Symbol RthJC RthJA
Thermal data
Parameter Thermal resistance junction-case max Thermal resistance junction-ambient max 62.5 TO-220/ DPAK 1 50 TO-247 Unit C/W C/W
Table 4.
Symbol IAR EAS
Avalanche data
Parameter Avalanche current, repetitive or not repetitive (pulse width limited by Tjmax) Single pulse avalanche energy (starting Tj=25C, ID=IAR, VDD=50V) Value 30 140 Unit A mJ
3/16
Electrical characteristics
STP30NF20 - STW30NF20 - STB30NF20
2
Electrical characteristics
(TCASE=25C unless otherwise specified) Table 5.
Symbol V(BR)DSS IDSS IGSS VGS(th) RDS(on)
On/off states
Parameter Drain-source breakdown voltage Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 1mA, VGS= 0 VDS = Max rating, VDS = Max rating,Tc=125C VGS = 20V VDS= VGS, ID = 250A VGS= 10V, ID= 15A 2 3 Min. 200 1 10
100
Typ.
Max.
Unit V A A nA V
4
0.065 0.075
Table 6.
Symbol gfs (1) Ciss Coss Crss Qg Qgs Qgd
Dynamic
Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-source charge Gate-drain charge Test conditions VDS =15V, ID = 15A Min. Typ. 20 1597 320 43 38 8 18 Max. Unit S pF pF pF nC nC nC
VDS =25V, f=1 MHz, VGS=0
VDD=160V, ID = 30A VGS =10V (see Figure 17)
1. Pulsed: pulse duration=300s, duty cycle 1.5%
4/16
STP30NF20 - STW30NF20 - STB30NF20
Electrical characteristics
Table 7.
Symbol td(on) tr td(off) tf
Switching times
Parameter Turn-on delay time Rise time Test conditions VDD=100V, ID=15A, RG=4.7, VGS=10V (see Figure 16) VDD=100V, ID=15A, RG=4.7, VGS=10V (see Figure 16) Min. Typ. 35 15.7 Max. Unit ns ns
Turn-off delay time Fall time
38 8.8
ns ns
Table 8.
Symbol ISD ISDM(1) VSD(2) trr Qrr IRRM trr Qrr IRRM
Source drain diode
Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current ISD=30A, VGS=0 ISD=30A, di/dt = 100A/s, VDD=100 V, Tj=25C 155 0.96 12.4 194 1.42 14.6 Test conditions Min. Typ. Max. 30 120 1.5 Unit A A V ns C A ns C A
ISD=30A, di/dt = 100A/s, VDD=100 V, Tj=150C
1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300s, duty cycle 1.5%
5/16
Electrical characteristics
STP30NF20 - STW30NF20 - STB30NF20
2.1
Figure 2.
Electrical characteristics (curves)
Safe operating area for TO-247 Figure 3. Thermal impedance for TO-247
Figure 4.
Safe operating area for TO-220/ DPAK
Figure 5.
Thermal impedance for TO-220/ DPAK
Figure 6.
Output characteristics
Figure 7.
Transfer characteristics
6/16
STP30NF20 - STW30NF20 - STB30NF20 Figure 8. Normalized BVDSS vs temperature Figure 9.
Electrical characteristics Static drain-source on resistance
Figure 10. Gate charge vs gate-source voltage Figure 11. Capacitance variations
Figure 12. Normalized gate threshold voltage vs temperature
Figure 13. Normalized on resistance vs temperature
7/16
Electrical characteristics Figure 14. Source-drain diode forward characteristics
STP30NF20 - STW30NF20 - STB30NF20 Figure 15. Maximum avalanche energy vs temperature
8/16
STP30NF20 - STW30NF20 - STB30NF20
Test circuit
3
Test circuit
Figure 17. Gate charge test circuit
Figure 16. Switching times test circuit for resistive load
Figure 18. Test circuit for inductive load Figure 19. Unclamped inductive load test switching and diode recovery times circuit
Figure 20. Unclamped inductive waveform
Figure 21. Switching time waveform
9/16
Package mechanical data
STP30NF20 - STW30NF20 - STB30NF20
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
10/16
STP30NF20 - STW30NF20 - STB30NF20
Package mechanical data
TO-247 MECHANICAL DATA
mm. MIN. 4.85 2.20 1.0 2.0 3.0 0.40 19.85 15.45 5.45 14.20 3.70 18.50 3.55 4.50 5.50 3.65 5.50 0.140 0.177 0.216 14.80 4.30 0.560 0.14 0.728 0.143 0.216 TYP MAX. 5.15 2.60 1.40 2.40 3.40 0.80 20.15 15.75 MIN. 0.19 0.086 0.039 0.079 0.118 0.015 0.781 0.608 0.214 0.582 0.17 inch TYP. MAX. 0.20 0.102 0.055 0.094 0.134 0.03 0.793 0.620
DIM. A A1 b b1 b2 c D E e L L1 L2 oP oR S
11/16
Package mechanical data
STP30NF20 - STW30NF20 - STB30NF20
TO-220 MECHANICAL DATA
DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154
oP
Q
12/16
STP30NF20 - STW30NF20 - STB30NF20
Package mechanical data
DPAK mechanical data
mm Dim Min A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10 8.5 4.88 15 1.27 1.4 2.4 0.4 0 4 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.50 0.055 0.094 10.4 0.393 Typ Max 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 Min 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352
inch Typ Max 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 0.315 0.409 0.334 0.208 0.625 0.55 0.68 0.126 0.015
13/16
Packaging mechanical data
STP30NF20 - STW30NF20 - STB30NF20
5
Packaging mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992
TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956
BASE QTY 1000
* on sales type
14/16
STP30NF20 - STW30NF20 - STB30NF20
Revision history
6
Revision history
Table 9.
Date 25-Jan-2007 18-Oct-2007
Document revision history
Revision 1 2 First Release Added DPAK Changes
15/16
STP30NF20 - STW30NF20 - STB30NF20
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
16/16

▲Up To Search▲

Price & Availability of STW30NF20

	To Download STW30NF20 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .