 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Specification AXLE40 Oscillator type : TCXO Parameter Frequency range Standard frequencies Frequency stability Initial tolerance vs. temperature in operating temperature range (steady state) Operating temperature range vs. supply voltage variation vs. load change long term (aging) per year Frequency adjustment range Mechanical (internal trimmer) Electronic Frequency Control (EFC) EFC voltage VC (Option I ="V") EFC slope (f / VC) EFC input impedance RF output Signal waveform Load Rise & decay time Symmetry (duty cycle) Start-up time Supply voltage VS Current consumption (steady state) Issue: 02 Date: 2005-07-15 min. 2 typ. 10 / 16.384 max. 150 Unit MHz MHz ppm ppm ppm C ppm ppm ppm ppm ppm V V k Condition -2.5 -30 1 2.5 85 0.3 0.3 1 @+25C Other stabilities on request Vs 5% @ +25C Option I ="T" Option I ="V" Option II = "50" Option II = "33" Option I ="V" Option I ="V" 5 5 0.5 0.5 positive 10 HCMOS 15 4.5 2.5 Operable temperature range Storage temperature range IEC 60679-3 CO 02 Enclosure (see drawing) Weight Packing V HBM as IEC 61000-4-2 ESD Sensitivity Notes: 1. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated 2. Overall frequency stability = initial tolerance + temp.stability + supply & load change + aging 10 45 55 10 3.15 3.3 3.45 4.75 5.0 5.25 25 40 -40 +85 -45 +90 20.7x13.1x5.5 max 5 Stick 1500 pF ns % ms V V mA mA C C mm gram @ VS/2 Option II = "50" Option II = "33" 2 MHz ~ 27.0 MHz 27+ MHz ~ 150 MHz Ordering Code: Model (Specification) AXLE40 Option I Option II Frequency [MHz] V 50 16.384 GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany AXLE40 page 1(2) www.AXTAL.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: info@axtal.com Enclosure drawing Pin connections Pin # Symbol 1 N.C. VC 7 GND 8 RF OUT 14 VS Function No Connection (Option "T") Control Voltage (Option "V") Ground RF Output Supply Voltage Option "T": Trimmer hole on top side (above pin 1) Environmental conditions Test Visual inspection, dimensions Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* Bump* Free fall* IEC 60068 Part ... IEC 60679-1 clause ... 4.3 4.6.2 4.6.3 Test conditions Enclosure styles as in IEC 60679-3 or 61837, if applicable Gross leak: Test Qc, Fine leak: Test Qk Test Ta (235 5)C Method 1 Test Tb Method 1A, 5s Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Eb, 4000 bumps per Axes, 40g, 6 ms Test Ed procedure 1, 2 drops from 1m height Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Na, 10 cycles at extremes of operating temperature range Test Ba, 16 h at upper temperature indicated by climatic category Test Db variant 1 severity b), 55C/95% r.H., 6 cycles Test Aa, 2 h at lower temperature indicated by climatic category Sequence of 4.6.14, 4.6.15 (1st cycle), 4.6.16, 4.6.15 (5 cycles) Test Ca, 56 days 2-17 2-20 2-58 2-27 2-29 2-32 4.6.8 4.6.6 4.6.9 4.6.7 Vibration, sinusoidal* 2-6 Rapid change of temperature Dry heat Damp heat, cyclic* Cold Climatic sequence* Damp heat, steady state* Endurance tests - ageing - extended aging 2-14 2-2 2-30 2-1 1-7 2-3 4.6.5 4.6.14 4.6.15 4.6.16 4.6.17 4.6.18 4.7.1 4.7.2 30 days @ 85C, OCXO @25C 1000h, 2000h, 8000h @85C GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany AXLE40 page 2(2) www.AXTAL.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: info@axtal.com |
Price & Availability of AXLE40
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |