 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Semiconductor S79xxPI Fixed-Negative-Voltage Regulator Descriptions This series of fixed-negative-voltage monolithic integrated-circuit voltage regulators is designed to complement series S7800 in a wide range of applications. These applications include on-card regulator for elimination of noise and distribution problems associated with single point regulations. Each of these regulators can deliver up to 1.0 amperes of output current. The internal current Limiting and thermal shutdown features of these regulators make them essentially immune to overload. In addition to use as fixed-voltage regulators, these devices can be used with external components to obtain adjustable output voltages and also as the power pass element in precision regulators. Features * Output Current of 1A * Thermal Shutdown Protection * Short-Circuit Current Limit Protection * No External Components * Output Transistor Safe Operating Area Protection Ordering Information Type NO. S79xxPI Marking S79PI Package Code TO-220F-3L : Voltage Code (05: -5V, 08: -8V, 09: -9V, 12: -12V, 15: -15V) Outline Dimensions 9.80~10.20 3.05~3.35 unit: mm 15.40~15.80 12.20~12.60 9.10~9.30 12.40~13.00 1.07 Min. 0.90 Max. 2.54 Typ. 2.54 Typ. 3.46 Typ. 4.70 Max. 2.70 Max. KSD-I0O004-001 0.60 Max. PIN Connections 1. GND 2. Input 3. Output 1 S79xxPI Absolute Maximum Ratings Characteristic Operating Input Voltage Power Dissipation (Tc=25) Power Dissipation (without Heatsink) Operating Temperature Range Junction Temperature Storage Temperature Range Ta=25C Symbol VIN PD PD Topr TJ TSTG Ratings -35 20.8 2.0 -40 ~ 85 150 -55 ~ 150 Unit V W W C C C Electrical Characteristics (TJ = 0 to 125, Vin= -10V, Iout=500mA, unless otherwise specified.) Characteristic Symbol Test Condition* Tj =25 IOUT=5mA ~ 1A, VIN=-20V ~ -7.0V S7905PI Min. -5.20 -5.25 - Typ. -5.0 -5.0 12.5 4 15 5 1.5 0.15 0.08 125 60 2.0 -0.4 2.1 Max. -4.80 -4.75 50 15 100 50 2.0 0.5 0.5 - Unit Output Voltage** VOUT VIN=-25V ~ -7.0V VIN=-12V ~ -8.0V IOUT=5mA ~ 1.0A IOUT=250mA ~ 750mA V Line Regulation VOUT Tj =25 mV Load Regulation VOUT IB IB VN RR VD of TCVO IPK Tj =25 Tj =25 mV Quiescent Current Quiescent Current Change mA mA VIN = -25V ~ -7.0V IOUT = 5mA ~ 1A Output Noise Voltage Ripple Rejection Ratio Dropout Voltage Temperature Coefficient Output Voltage Drift Peak Output Current f=10Hz ~ 100KHz Tj =25 54 - uVrms dB V mV/C A f=120Hz, VIN =-18V ~ -8.0V IOUT=1A IOUT=5mA Tj =25 Tj =25 - Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O004-001 2 S79xxPI Electrical Characteristics (TJ = 0 to 125, Vin= -14V, Iout=500mA, unless otherwise specified.) Characteristic Symbol Test Condition* Tj =25 IOUT=5mA ~ 1A, VIN=-23V ~ -10.5V S7908PI Min. -8.30 -8.40 - Typ. -8.0 -8.0 12.5 4 15 5 1.5 0.15 0.08 200 60 2.0 -0.6 2.1 Max. -7.70 -7.60 160 80 160 80 2.0 1.0 0.5 - Unit Output Voltage** VOUT VIN=-25V ~ -10.5V VIN=-17V ~ -11V IOUT=5mA ~ 1.0A IOUT=250mA ~ 750mA V Line Regulation VOUT Tj =25 mV Load Regulation VOUT IB IB VN RR VD TCVO IPK Tj =25 Tj =25 mV Quiescent Current Quiescent Current Change mA mA VIN = -25V ~ -10.5V IOUT = 5mA ~ 1A Output Noise Voltage Ripple Rejection Ratio Dropout Voltage Temperature Coefficient of Output Voltage Drift Peak Output Current f=10Hz ~ 100KHz Tj =25 54 - uVrms dB V mV/C A f=120Hz, VIN =-21.5V ~ -11.5V IOUT=1A IOUT=5mA Tj =25 Tj =25 Tj =25 Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O004-001 3 S79xxPI Electrical Characteristics (TJ = 0 to 125, Vin= -15V, Iout=500mA, unless otherwise specified.) Characteristic Symbol Test Condition* Tj =25 IOUT=5mA ~ 1A, VIN=-23V ~ -11.5V S7909PI Min. -9.30 -9.40 - Typ. -9.0 -9.0 10 5 12 4 3 0.1 0.08 175 60 2.0 -0.4 2.1 Max. -8.70 -8.60 180 90 180 90 6 1.0 0.5 - Unit Output Voltage** VOUT VIN=-25V ~ -10.5V VIN=-17V ~ -11V IOUT=5mA ~ 1.0A IOUT=250mA ~ 750mA V Line Regulation VOUT Tj =25 mV Load Regulation VOUT IB IB VN RR VD TCVO IPK Tj =25 Tj =25 mV Quiescent Current Quiescent Current Change mA mA VIN = -25V ~ -11.5V IOUT = 5mA ~ 1A Output Noise Voltage Ripple Rejection Ratio Dropout Voltage Temperature Coefficient of Output Voltage Drift Peak Output Current f=10Hz ~ 100KHz Tj =25 54 - uVrms dB V mV/C A f=120Hz, VIN =-21.5V ~ -11.5V IOUT=1A IOUT=5mA Tj =25 Tj =25 Tj =25 Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O004-001 4 S79xxPI Electrical Characteristics (TJ = 0 to 125, Vin= -19V, Iout=500mA, unless otherwise specified.) Characteristic Symbol Test Condition* Tj =25 IOUT=5mA ~ 1A, VIN=-27V ~ -14.5V S7912PI Min. -12.5 -12.6 - Typ. -12.0 -12.0 5 3 15 5 2.0 0.04 0.08 300 60 2.0 -0.8 2.1 Max. -11.5 -11.4 80 30 200 75 3.0 0.5 0.5 - Unit Output Voltage** VOUT VIN=-30V ~ -14.5V VIN=-22V ~ -16V IOUT=5mA ~ 1.0A IOUT=250mA ~ 750mA V Line Regulation VOUT Tj =25 mV Load Regulation VOUT IB IB VN RR VD TCVO IPK Tj =25 Tj =25 mV Quiescent Current Quiescent Current Change mA mA VIN = -30V ~ -14.5V IOUT = 5mA ~ 1A Output Noise Voltage Ripple Rejection Ratio Dropout Voltage Temperature Coefficient of Output Voltage Drift Peak Output Current f=10Hz ~ 100KHz, Tj =25 54 - uVrms dB V mV/C A f=120Hz, VIN =-25V ~ -15V IOUT=1A IOUT=5mA Tj =25 Tj =25 Tj =25 Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O004-001 5 S79xxPI Electrical Characteristics (TJ = 0 to 125, Vin= -23V, Iout=500mA, unless otherwise specified.) Characteristic Symbol Test Condition* Tj =25 IOUT=5mA ~ 1A, VIN=-30V ~ -17.5V S7915PI Min. -15.6 -15.75 Typ. -15.0 -15.0 5 3 15 5 2.0 0.04 0.08 375 60 2.0 -1.0 2.1 Max. -14.4 -14.25 Unit Output Voltage** VOUT VIN=-30V ~ -17.5V VIN=-26V ~ -20V IOUT=5mA ~ 1.0A IOUT=250mA ~ 750mA V Line Regulation VOUT Tj =25 - 100 50 200 75 3.0 0.5 0.5 uVrms dB V mV/C A mA mA mV Load Regulation VOUT IB IB VN RR VD TCVO IPK Tj =25 Tj =25 mV Quiescent Current Quiescent Current Change VIN = -30V ~ -17.5V IOUT = 5mA ~ 1A Output Noise Voltage Ripple Rejection Ratio Dropout Voltage Temperature Coefficient of Output Voltage Drift Peak Output Current f=10Hz ~ 100KHz, Tj =25 54 - f=120Hz, VIN =-28.5V ~ -18.5V IOUT=1A IOUT=5mA Tj =25 Tj =25 Tj =25 Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. Test circuit KSD-I0O004-001 6 S79xxPI Electrical Characteristic Curves Fig. 1 VOUT - VIN Fig. 2 VDROP - Ta Fig. 3 IB - Tj Fig. 4 VOUT - Tj Fig. 5 ISC - VIN KSD-I0O004-001 7 S79xxPI The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-I0O004-001 8 |
Price & Availability of S7909PI
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |