View AXIOM75_4175168.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Issue: 01 Date: 2007-05-14 Specification AXIOM75 Oscillator type : OCXO with Sine Wave Output, Low Phase Noise Parameter
Frequency Range Standard frequencies Frequency stability Initial tolerance at delivery vs. temperature in operating temperature range
min.
typ.
max.
Unit
MHz ppb ppb ppb ppb ppb ppb C ppb ppb ppb ppb ppb ppb ppm ppm V k
Condition
10 120 10.000 / 12.800 / 100.000 500 200 100 50 25 10 +60 10 5 10 2 200 100
@+25C @VC = 2.5 V Option II = "200" Option II = "100" Option II = "50" Option II = "25" Option II = "10" VS 5% RL 5% Option II="200", "100" Option II="50","25","10" Option II="200", "100" Option II="50","25","10" Option II= "200", "100" Option II="50","25","10"
operating temperature range vs. supply voltage variation vs. load change Long term (aging) per day, after 30 days operation long term (aging) 1st year, after 30 days operation Frequency adjustment range Electronic Frequency Control (EFC) range EFC voltage VC EFC slope (f / VC) EFC input impedance RF output Signal waveform Output level Harmonics Spurious Warm-up time Phase noise @ 10.000 MHz
-10
5 1
3 0.8 0.25 100
1 4.75 positive
Sine wave +7 -30 -90 5 -140 -150 -155 -160 5.0 12 dBm dBc dBc min dBc/Hz dBc/Hz dBc/Hz dBc/Hz V V mA mA mAmA
RL = 50
Supply voltage VS Current consumption (steady state) @ +25C Current consumption (warm-up)
C Operable temperature range C Storage temperature range mm Enclosure (see drawing) gram Weight Packing V HBM as in IEC 61000-4-2 ESD Sensitivity Notes: 1. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated
5.25 12.6 250 100 600 250 -20 +70 -40 +85 25.8x25.8x13.5 max. 10 Palette 1500
4.75 11.4
ffinal/f0 < 0.1 ppm @ 100 Hz @ 1kHz @ 10 kHz @ 100 kHz Option I = "50" Option I = "12" Option I = "50" Option I = "12" Option I = "50" Option I = "12"
Ordering Code:
Model (Specification) AXIOM75
GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany
Option I Option II Frequency [MHz] 12 25 10.000
AXIOM75 page 1(2) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: info@axtal.com
Enclosure drawing
Pin connections
Pin # Symbol 1 RF OUT 2 GND 3 VC 4 N.C. 5 VS Function RF Output Ground, case Control Voltage (EFC) No Connection Supply Voltage
Environmental conditions
Test Visual inspection, dimensions Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* Bump* Free fall* IEC 60068 Part ... IEC 60679-1 clause ... 4.3 4.6.2 4.6.3 Test conditions Enclosure styles as in IEC 60679-3 or 61837, if applicable Gross leak: Test Qc, Fine leak: Test Qk Test Ta (235 5)C Method 1 Test Tb Method 1A, 5s Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Eb, 4000 bumps per Axes, 40g, 6 ms Test Ed procedure 1, 2 drops from 1m height Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Na, 10 cycles at extremes of operating temperature range Test Ba, 16 h at upper temperature indicated by climatic category Test Db variant 1 severity b), 55C/95% r.H., 6 cycles Test Aa, 2 h at lower temperature indicated by climatic category Sequence of 4.6.14, 4.6.15 (1st cycle), 4.6.16, 4.6.15 (5 cycles) Test Ca, 56 days
2-17 2-20 2-58 2-27 2-29 2-32
4.6.8 4.6.6 4.6.9 4.6.7
Vibration, sinusoidal* 2-6
Rapid change of temperature Dry heat Damp heat, cyclic* Cold Climatic sequence* Damp heat, steady state* Endurance tests - ageing - extended aging
2-14 2-2 2-30 2-1 1-7 2-3
4.6.5 4.6.14 4.6.15 4.6.16 4.6.17 4.6.18
4.7.1 4.7.2
30 days @ 85C, OCXO @25C 1000h, 2000h, 8000h @85C
GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany
AXIOM75 page 2(2)
www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: info@axtal.com

▲Up To Search▲

Price & Availability of AXIOM75

	To Download AXIOM75 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .