 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CCPD-023 5x7mm SMD LVPECL Clock Oscillator 2.5 Volts Model CCPD-023 is a 77.760MHz to 161.000MHz LVPECL Clock Oscillator operating at 2.5Volts. The oscillator utilizes a High Q Third Overtone crystal design providing very low Jitter and Phase Noise. No Sub-Harmonics are present in the Output Signal. 5x7mm SMD Applications: Digital Video SONET/SDH/DWDM Storage Area Networks Broadband Access Ethernet, Gigabit Ethernet Rev.: C Date: 10-10-07 CCPD-023 5x7mm SMD LVPECL Clock Oscillator Frequency Range: Frequency Stability Options(ppm): Temperature Range: (standard) (Option M) (Option X) Storage: Input Voltage: Input Current: Output: Symmetry: Rise/Fall Time: 77.760Mhz to 161.000Mhz 20, 25, 50, 100 0C to +70C -20C to +70C -40C to +85C -55C to 120C 2.5V 0.125V 55mA Typ., 88mA Max Differential LVPECL 45/55% Max @ 50%Vdd 1nsec Max @ 20% to 80% Vdd Logic: Terminated to Vdd-2V into 50 ohms Temp. 0C to 85C "0"=0.690 Min., 1.095 Max "1"=1.475 Min., 1.760 Max Temp. -40C to 0C "0"=0.670 Min., 1.195 Max "1"=1.415 Min., 1.620 Max Disable Time 200nSec Max Start-up Time 1mSec Typ., 2mSec Max Phase Jitter: Phase Noise: Sub-harmonics: Aging: 12KHz~80MHz (See Plot Below) 0.5psec Typ., 1psec RMS Max None <3ppm 1st/yr, <1ppm every year thereafter Actual CCPD-023X-25-155.520MHz Plot Rev.: C Date: 10-10-07 CCPD-023 5x7mm SMD LVPECL Clock Oscillator PART NUMBER GUIDE CCPD - 023 X - 25 - 155.520 #1 #2 #3 #4 #5 #1 Crystek PECL Osc. #2 Model 023 #3 Temp. Range (Blank=0/70C)(M=-20/70C)(X=-40/85C) #4 Stability: (see Table 1) #5 Frequency in MHz: 3 or 6 decimal places Blank(std) 50 25 20 Stability Indicator 100ppm 50ppm 25ppm 20ppm Example: CCPD-023X-25-155.520 2.5V, -40/85C, 25ppm, 155.520 MHz Table 1 Thermal Shock: MIL-STD-883, Method 1011, Condition A Moisture Resistance: MIL-STD-883, Method 1004 Environmental: TEMPERATURE Shock: Solderability: Vibration: Solvent Resistance: Resistance to Soldering Heat: Mechanical: MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 2007, Condition A MIL-STD-202, Method 215 MIL-STD-202, Method 210, Condition I or J RECOMMENDED REFLOW SOLDERING PROFILE 260C 217C 200C 150C Ramp-Up 3C/Sec Max. Critical Temperature Zone Ramp-Down 6C/Sec. Preheat 180 Secs. Max. 8 Minutes Max. 90 Secs. Max. 260C for 10 Secs. Max. NOTE: Reflow Profile with 240C peak also acceptable. 0.274 0.007 (6.96 0.18) Tri-State Function 0.193 0.007 (4.90 0.18) 0.045 0.008 (1.14 0.20) Part Number Frequency DC Lot Code Open or N/C Pin #1 State Denotes pad 1 0.055 Typ (1.40 Typ) 0.045 0.008 (1.14 0.20) #1 #6 #2 #5 #3 #4 "1" level 0.7*Vcc Min SUGGESTED PAD LAYOUT 0.071 SQ (1.80) Active Active High Z Output State "0"level 0.3*Vcc Max Pad 1 2 3 4 5 6 0.148 (3.75) Connection N/C GND Out Comp. Out VCC Enable/Disable 0.100 (2.54) 0.200 (5.08) 0.200 (5.08) 0.01uF Bypass Capacitor Recommended Rev.: C Date: 10-10-07 |
Price & Availability of CCPD-023
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |