View ADJD-MJ60_4186558.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ADJD-MJ50 / ADJD-MJ51 and ADJD-MJ60 / ADJD-MJ61
High Performance RGB LED Light Source
Data Sheet
Description
Avago RGB LED Light Source is a high performance device which can be operated at high driving current. It comes with a plug-and-play electrical connector. The built-in heat sink and the mechanical mounting features simplify the thermal management of a lighting solution. This enables effective heat transfer and maintain LED junction below maximum allowed temperature. The footprint of the top emitting package is 100mm x 18mm x 3.6mm with aperture of 96mm x 6mm. The footprint of side emitting package is 100mm x 18mm x 8mm with aperture of 96mm x 4.6mm. The reflector cavity design maximized the light extraction as well as maximized the color mixing to produce the required color. Together with closely pitched LED dice, the color mixing is best of its class.
Features
* High flux output * Choice of top emitting or side emitting * Compact footprint for ease of stacking horizontally and vertically. * Integrated heatsink to simplify thermal management * Red, Green & Blue color premix in the reflector cavity to produce required color * Silicone encapsulation for extra long product life * Plug and play mechanical mounting and electrical connection (connector interface) * Fully serviceable due to ease of mounting and demounting.
Applications
* Decorative lighting * Architectural lighting * Specialty lighting
CAUTION: ADJD-MJ50/51 & ADJD-MJ60/61 are Class 1 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Technologies Application Note AN-1142 for additional details
Package Dimensions
ADJD-MJ50 and ADJD-MJ51 (Top Emitting)
LED die position 1
100.00 97.00
LED die position 50
(4.41) 12.00 18.00
7.29
17.15 14.00 19.00
3D VIEW
19.00 14.00
TOP VIEW
Connector Connector Pin 1 Pin 8
34.00
3.60
2.00
15.00
96.00
BOTTOM VIEW
Dr & Tap For M3 Screw (4X)
2.00
SIDE VIEW
ADJD-MJ60 and ADJD-MJ61 (Side Emitting)
Connector Pin 8
14.00 19.00 34.00 16.15
Connector Pin 1
19.00 14.00
TOP VIEW
Dr & Tap For M3 Screw (4X)
12.00
18.00
18.00
3D VIEW LED die position 1
8.00
LED die position 50
100.00 98.00
2.00
46.65
0.70
FRONT VIEW
1.00 15.00 96.00 2.00
2.00
2.00
BOTTOM VIEW
Notes: 1. All Dimensions are in millimeters. 2. Tolerance = 0.20 mm unless otherwise specified.
4.67 6.00
Color Configuration
Electrical Configuration
Pin 1 G1 + Pin 2 R+ Pin 3 B+ Pin 4 G2 +
Male Connector
Connector and Pin Configuration
Pin Number 4 5 6 7 8
G1 Pin 5 RPin 6 BPin 7 G2 Pin 8
Configuration G + R+ B+ G + G RBG -
Recommended female connector: Molex 51146-0800
*Note: This cable is only applicable for ADJD-MJ51 and ADJD-MJ61
Table 1. Absolute Maximum Ratings (Tj = 25C) Parameter DC forward current [] [] [] Power dissipation Maximum junction temperature Tj max Operating board temperature, TB range [4] Storage temperature range Red 00 0.5 0 - 40 to + 85 - 40 to + 85 Green & Blue 50 6.75 Unit mA W C C C
Note: 1. Per individual string. 2. Derate linearly as shown in Figure 6. 3. Operation at current below 20 mA is not recommended. 4. Board temperature, TB = temperature of the metal core PCB at the bottom of the LED.
Table 2. Electrical Characteristics (Tj = 25C) Forward Voltage, VF (V) [1] [2] Color AlInGaP Red InGaN Green G InGaN Green G InGaN Blue Min. 5 0 0 0 Typ. 9 5 5 5 Max. 5 45 45 45 Testing Current, IF (mA) [1] 00 50 50 50 Dynamic Resistance, RD (W) [3] [4] 6
Note: 1. Per individual string. 2. VF tolerance is 1.0V. 3. Measured at Tj = 25C, applicable from IF = 50mA onwards. 4. Dynamic resistance is the inverse slope of the forward current vs. forward voltage characteristic as in Figure 3.
Table 3. Luminous Flux Luminous Flux fv (lm) [1] [2] @ Tj = 25C Min. 0 75 75 Typ. 00 5 5 0 White fv at 9000K color temperature, TB = 70C [3] [4] [5] Typ. 0
Color AlInGaP Red InGaN Green G InGaN Green G InGaN Blue
Testing Current, IF (mA) 00 50 50 50
Note: 1. fV is the total luminous flux output as measured with an integrating sphere per individual string. 2. fV tolerance 15%. 3. White point at 9000K color temperature according to CIE 1931: (0.285, 0.300). 4. When the LEDs are tuned to 9000K color temperature at TB = 70C, not all LED strings will be driven at its maximum forward current. 5. Board temperature, TB = temperature of the metal core PCB at the bottom of the LED.
4
Table 4. Optical Characteristics (Tj = 25C) Chromaticity Coordinates [] Typ. x 0.684 0.9 0.9 0.5 y 0.5 0.75 0.75 0.0 Peak Wavelength, lp (nm) Typ. 66 5 5 45 Spectral Width at Half Max, Dl1/2 (nm) [] Typ. 0 5 5 4
Color AlInGaP Red InGaN Green G InGaN Green G InGaN Blue
Testing Current, IF (mA) 00 50 50 50
Dominant Wavelength, ld (nm) [] Min. 65 50 50 450 Typ. 67 50 50 457 Max. 65 55 55 460
Notes: 1. The chromaticity coordinates and dominant wavelength are derived from the CIE Chromaticity Diagram and represent the perceived color of the device. 2. The total spectral width at 1/2 of the peak intensity.
Table 5. Thermal Characteristics Temperature Coefficients of Dominant Wavelength Dldom/DTj (nm/C) Typ. 0.08 0.0 0.0 0.0 of Forward Voltage DVF/DTj (mV/C) Typ. -4 - - -9
Color AlInGaP Red InGaN Green G InGaN GreenG InGaN Blue
Table 6. Thermal Resistance (From Junction to Board) Thermal Resistance, Junction to Board, RqJ-B [] (C/W) Typ. .0
Part Number ADJD-MJ50/5 and ADJD-MJ60/6
Notes: 1. Thermal resistance is defined as the increase of junction temperature with reference to TB per 1W of total electrical power that is applied to the entire unit. 2. TB = temperature of the metal core PCB at the bottom of the LED.
5
Intensity Bins
ADJD-MJ50 / 51
Luminous Flux fv (lm) [1] Bin ID A B Min. 400 50 Max. 50 670 Bin ID Z A
ADJD-MJ60 / 61
Luminous Flux fv (lm) [1] Min. 0 400 Max. 400 50
Notes: 1. The luminous flux used for intensity binning is by lighting up all R, G1, G2 & B channels together at maximum rated current. 2. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on current available bins.
Figure 1. Color bins1
Note: 1. The chromaticity coordinate used for binning the product is obtained when all R, G1, G2 & B channels are lighted up together at maximum rated current. 2. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on current available bins.
Figure 2. Relative intensity vs. wavelength 6
Figure 3. Forward current vs. forward voltage
Figure 4. Relative luminous flux vs. forward current @ Tj=25C
Figure 5. Relative light output vs junction temperature
Figure 6. Maximum forward current vs board temperature TB
Note: Board temperature, TB = temperature of the metal core PCB at the bottom of the LED.
7
Packing Information
ADJD-MJ50/51 and ADJD-MJ60/61 are supplied in plastic tray made of ESD safe material. Each tray contains 25 units.
Handling Cautions
1. The encapsulation material of the product is made of silicone for better reliability of the product. As silicone is a soft material, please do not press on the silicone or poke a sharp object onto the silicone. These might damage the product and cause premature failure. During assembly or handling, the unit should be held on the metal reflector or metal body. 2. When attaching the product to the heat sink, a thermally conductive compound is necessary as the interface between the metal core PCB of the product and the heat sink to ensure sufficient heat dissipation.
For product information and a complete list of distributors, please go to our web site:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright (c) 006 Avago Technologies Limited. All rights reserved. Obsoletes AV0-0448EN AV0-080EN - May 6, 007

▲Up To Search▲

Price & Availability of ADJD-MJ60

	To Download ADJD-MJ60 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .