View VLA106-24151_4197311.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HYBRID IC
VLA106-24151
ISOLATED TYPE DC-DC CONVERTER DESCRIPTION
The VLA106-24151 is a DC-DC converter. Its output power is 1.5W and the input is isolated from the output. The over-current protection circuit is built-in and it is the best for on-board power supplies, such as industrial equipment and control equipment.
33.0 MAX
OUTLINE DRAWING
Dimensions: mm
FEATURES
*Input voltage range: 21.6 to 26.4V DC *Output: +15V, 100mA (output power : 1.5W) *Thin-profile and lightweight design *Isolation between input and output : 2500Vrms, 1min *Built-in over-current protection circuit
24151 XXXX
24.0 MAX
5.5 MAX 4.5 MAX 2.54 x 10=25.4 4.5 MAX
13.5 MAX 18 MAX
APPLICATIONS
On-board power supplies, such as industrial equipment and control equipment.
1
11
BLOCK DIAGRAM
+VIN
8 9
FILTER
FILTER
3
CONSTANT VOLTAGE CIRCUIT
+VO
2
NC
DRIVE CIRCUIT
1
-VO
-VIN
10 11
OVER-CURRENT PROTECTION
OPTO COUPLER
HYBRID IC
VLA106-24151
ISOLATED TYPE DC-DC CONVERTER MAXIMUM RATINGS (unless otherwise noted, Ta=25C) Symbol VIN IO Topr Tstg Viso Parameter Input voltage Output current Operating temperature Storage temperature Input-output isolation voltage Conditions Between pins 8,9 and 10,11 Between pins 3 and 1 No condensation (*1) No condensation AC , 1min Ratings 27 100 -10 ~ +70 -20 ~ +85 2500 Unit V mA C C Vrms
(*1) Please refer to derating characteristics.
ELECTRICAL CHARACTERISTICS (unless otherwise noted, VIN=24V, Ta=25C) Symbol Parameter Test conditions Recommended range Operating guarantee range IO= 0 ~ 100mA IO=100mA, VIN=21.6 ~ 26.4V IO= 0 ~ 100mA IO=100mA IO=100mA Limits MIN. 21.6 18.0 14.25 TYP. 24.0 MAX. 26.4 26.4 15.75 75 750 120 Unit V V V mV mV mV %
VIN VO Reg-I Reg-L VP-P
Input voltage Output voltage Input regulation Load regulation Ripple voltage Efficiency
--
15.0
-- -- -- --
-- -- --
75
--
TEST CIRCUIT DIAGRAM
8
3
+
VIN
9
100F 50V VLA106-24151
+
2
47F 50V
Load
10 11 1
2
HYBRID IC
VLA106-24151
ISOLATED TYPE DC-DC CONVERTER TYPICAL CHARACTERISTICS
DERATING CHARACTERISTICS 140
OUTPUT CURRENTo
OUTPUT VOLTEGE - OUTPUT CURRENT CHARACTERISTICS
18.0 OUTPUT VOLTAGE Vo(V) 16.0 14.0 12.0 10.0 8.0 6.0 4.0 2.0 0.0
-10 10 30 50 70 90 110
0 20 40 60 80 100 120 140 160 180
120 100 80 60 40 20 0
OPERATING TEMPERATURE opr
OUTPUT CURRENT Io(mA)
EFFICIENCY - OUTPUT CURRENT CHARACTERISITICS
EFFICIENCY - OUTPUT CURRENT CHARACTERISTICS
100 90 80
EFFICIENCY (%)
70 60 50 40 30 20 10 0 0 20 40 60 80 100 120 140
OUTPUT CURRENT Io(mA)
VIN=24V Ta=25C
100 90 80 70 60 50 40 30 20 10 0
EFFICIENCY (%)
Io=100mA Ta=25C
18 19 20 21 22 23 24 25 26 27 28
INPUT VOLTAGE VIN(V)
OUTPUT VOLTAGE - INPUT VOLTAGE CHARACTERISTICS
INPUT CURRENT - INPUT VOLTAGE CHARACTERISTICS
20.0 18.0 16.0 14.0 12.0 10.0 8.0 6.0 4.0 2.0 0.0 0
Io=100mA Ta=25C
5 10 15 20 25 INPUT VOLTAGE VIN(V)
30
300 270 240 210 180 150 120 90 60 30 0 0 5
OUTPUT VOLTAGE Vo(V)
INPUT CURRENT IIN(mA)
Io=100mA Ta=25C
10 15 20 25 INPUT VOLTAGE VIN(V)
30
3
HYBRID IC
VLA106-24151
ISOLATED TYPE DC-DC CONVERTER FOR SAFETY USING
Great detail and careful attention are given to the production activity of Hics, such as the development, the quality of production, and in it's reliability. However the reliability of Hics depends not only on their own factors but also in their condition of usage. When handling Hics, please note the following cautions. CAUTIONS Packing The materials used in packing Hics can only withstand normal external conditions. When exposed to outside shocks, rain and certain environmental contaminators, the packing materials will deteriorates. Please take care in handling. 1) 2) 3) 4) 5) Don't stack boxes too high. Avoid placing heavy materials on boxes. Boxes must be positioned correctly during transportation to avoid breakage. Don't throw or drop boxes. Keep boxes dry. Avoid rain or snow. Minimal vibration and shock during transportation is desirable.
Carrying
Storage
When storing Hics, please observe the following notices or possible deterioration of their electrical characteristics, risk of solderability, and external damage may occur. 1) Devices must be stored where fluctuation of temperature and humidity is minimal, and must not be exposed to direct sunlight. Store at the normal temperature of 5 to 30 degrees Celsius with humidity at 40 to 60%. 2) Avoid locations where corrosive gasses are generated or where much dust accumulates. 3) Storage cases must be static proof. 4) Avoid putting weight on boxes. When extended storage is necessary, Hics must be kept non-processed. When using Hics which have been stored for more than one year or under severe conditions, be sure to check that the exterior is free from flaw and other damages. To prevent any electrical damages, use Hics within the maximum ratings. current, voltage, etc. must not exceed these conditions. The temperaqture,
Extended storage
Maximum ratings Polarity
To protect Hics from destruction and deterioration due to wrong insertion, make sure of polarity in inserting leads into the board holes, conforming to the external view for the terminal arrangement.
4
HYBRID IC
VLA106-24151
ISOLATED TYPE DC-DC CONVERTER
Marketing division, Marketing plannning department
6-41 Tsukuba, Isahaya, Nagasaki, 854-0065 Japan
Keep safety first in your circuit designs! - ISAHAYA Electronics Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropreate measures such as (1)placement of substitutive, auxiliary circuits, (2)use of non-flammable material or (3)prevention against any malfunction or mishap. Notes regarding these materials - These materials are intended as a reference to our customers in the selection of the ISAHAYA products best suited to the customer's application; they don't convey any license under any intellectual property rights, or any other rights, belonging to ISAHAYA Electronics Corporation or a third party. - ISAHAYA Electronics Corporation assumes no responsibility for any damage, or infringement of any third party's rights, originating in the use of any product data, diagrams, charts or circuit application examples contained in these materials. - All information contained in these materials, including product data, diagrams and charts, represent information on products at the time of publication of these materials, and are subject to change by ISAHAYA Electronics Coporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact ISAHAYA Electronics Corporation or an authorized ISAHAYA products distributor for the latest product infomation before purchasing a product listed herein. - ISAHAYA Electronics Corporation products are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact ISAHAYA Electronics Corporation or an authorized ISAHAYA products distributor when considering the use of a product contained herein for any specific perposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. - The prior written approval of ISAHAYA Electronics Corporation is necessary to reprint or reproduce in whole or in part these materials. - If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. - Please contact ISAHAYA Electronics Corporation or an authorized ISAHAYA products distributor for further details on these materials or the products contained therein.
5
Mar. 2004

▲Up To Search▲

Price & Availability of VLA106-24151

	To Download VLA106-24151 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .