View XC6216B992ML_4222113.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

XC6216/XE6216 Series
Voltage Regulators with Stand-by Function - Input Voltage: 28V
ETR0321_009
GENERAL DESCRIPTION
XC6216/XE6216 series are positive voltage regulator ICs with 28V of operation voltage. The series consists of a voltage reference, an error amplifier, a current limiter, a thermal shutdown circuit and a phase compensation circuit plus a driver transistor. The output voltage is selectable in 0.1V increments within the range of 2.0V to 12V using laser trimming technologies. With external resistors, the output voltage range can be expanded from 2.0V to 23V. The output stabilization capacitor (CL) is also compatible with low ESR ceramic capacitors. The over current protection circuit and the thermal shutdown circuit are built-in. These two protection circuits will operate when the output current reaches current limit level or the junction temperature reaches temperature limit level. The CE function enables the output to be turned off and the IC becomes a stand-by mode resulting in greatly reduced power consumption.
APPLICATIONS
Car audio, Car navigation systems Note book computers, PDAs Home appliances Audio visual equipment (Cameras, VCRs, etc.) Cordless phones, Wireless communication equipment
: More than 150mA (200mA limit) (VIN=VOUT+3.0V) Dropout Voltage : 300mV@IOUT=20mA : 2.0V~28.0V Input Voltage Range : 2.0V~12.0V (0.1V increments) Output Voltage 2.0V~23V with external resistors Setting Range High Accuracy : 2% : 1% optional for XC6216 series Low Power Consumption : 5 A Stand-by Current : Less than 0.1 A High Ripple Rejection : 30dB@1kHz Operating Temperature : -40 ~+85 Low ESR Capacitor : Ceramic Capacitor Compatible Current Limit Circuit Built-In Thermal Shutdown Circuit Built-In Small Packages : SOT-25, SOT-89, SOT-89-5, USP-6C, SOT-223, TO-252 Max Output Current
FEATURES
TYPICAL APPLICATION CIRCUIT
TYPICAL PERFORMANCE CHARACTERISTICS
Output Voltage vs. Input Volatage
1/41
XC6216/XE6216 Series
PIN CONFIGURATION
SOT-25 (TOP VIEW)
SOT-89 (TOP VIEW)
SOT-89-5 (TOP VIEW)
USP-6C (BOTTOM VIEW)
* The dissipation pad for the USP-6C package should be solder-plated in recommended mount pattern and metal masking so as to enhance mounting strength and heat release. If the pad needs to be connected to other pins, it should be connected to the VSS (No. 5) pin.
SOT-223 (TOP VIEW)
TO-252 (TOP VIEW)
PIN ASSIGNMENT
XC6216B/XE6216B Series
SOT-25* 1 2 3 4 5 PIN NUMBER SOT-89-5 USP-6C* 5 6 2 5 4 4 3 3 1 1 2
*The XE6216B in SOT-25 and USP-6C are under development.
PIN NAME VIN VSS NC CE VOUT NC
FUNCTIONS Power Input Ground No connection ON/OFF Control Output No connection
XC6216C Series
SOT-25 1 2 3 4 5 PIN NUMBER SOT-89-5 5 2 4 3 1 USP-6C 6 5 4 3 1 2 PIN NAME VIN VSS VOFB CE VOUT NC FUNCTIONS Power Input Ground Output Voltage Adjustment ON/OFF Control Output No connection
XC6216D/XE6216D Series
SOT-89* 3 2 1 PIN NUMBER SOT-223* 3 2 1
*The XE6216D in SOT-89, SOT-223 and TO-252 are under development.
TO-252* 1 2 3
PIN NAME VIN VSS VOUT
FUNCTIONS Power Input Ground Output
2/41
XC6216/XE6216
Series
PRODUCT CLASSIFICATION
Ordering Information
XC6216 DESIGNATOR DESCRIPTION Type and Options of Regulators SYMBOL B C D 20 ~ 99 Output Voltage DESCRIPTION : Fixed output voltage, High Active : Output voltage externally set, High Active : Fixed output voltage, No CE function : For the voltage within 2.0V ~9.9V; e.g. 2.5V 25 5.0V 50 : For the voltage above 10.0V; e.g. 10.6V A6 11.2V B2 12.0V C0 : For C type (output voltage externally set), VOFB=2.0V only : Within 2% accuracy : Within 1% accuracy : SOT-25 ( for B and C types only) : SOT-89 (for D type only) : SOT-89-5 (for B and C types only) : USP-6C (for B and C types only) : SOT-223 (for D type only) : TO-252 (for D type only) : Embossed tape, standard feed : Embossed tape, reverse feed
A0 ~ A9 B0 ~ B9 C0 20
Output Voltage Accuracy
2 1* M P
Packages
Device Orientation
* 1% Output Voltage Accuracy is not available in XC6216C.
E F J R L
XE6216 DESIGNATOR DESCRIPTION Type and Options of Regulators SYMBOL B D 20 ~ 99 Output Voltage DESCRIPTION : Fixed output voltage, High Active : Fixed output voltage, without CE function : For the voltage within 2.0V ~9.9V; e.g. 2.5V 25 5.0V 50 : For the voltage above 10.0V; e.g. 10.6V A6 11.2V B2 12.0V C0 : For C type (output voltage externally set), VOFB=2.0V only : Within 2% accuracy
A0 ~ A9 B0 ~ B9 C0 20
Output Voltage Accuracy Package
2 M P E R L
Device Orientation
: SOT-25 ( for B type only) * : SOT-89 (for D type only) * : SOT-89-5 (for B type only) : USP-6C (for B type only) * : Embossed tape, standard feed : Embossed tape, reverse feed
*The XE6216Bxx2M, XE6216Dxx2P, XC6216Bxx2E are under development.
3/41
XC6216/XE6216 Series
BLOCK DIAGRAMS
XC6216B/XE6216B Series (SOT-25, SOT-89-5, USP-6C)
*XE6216B in SOT-25 and USP-6C are under development.
XC6216C Series (SOT-25, SOT-89-5, USP-6C)
XC6216D/XE6216D Series (SOT-89, SOT-223, TO-252)
*The XE6216D in SOT-89, SOT-223 and TO-252 are under development.
4/41
XC6216/XE6216
Series
ABSOLUTE MAXIMUM RATINGS
XC6216B Series
PARAMETER Input Voltage Output Current Output Voltage CE Input Voltage SOT-25 Power Dissipation SOT-89-5 USP-6C Operating Temperature Range Storage Temperature Range
*1: IOUT Pd / (VIN-VOUT) Please refer to pages 37 ~ 40 for details.
SYMBOL VIN IOUT VOUT VCE
Pd
Topr Tstg
RATINGS VSS-0.3~30 300 (*1) VSS-0.3~VIN+0.3 VSS-0.3~30 250 (*2) 600 (PCB mounted) 500 (*2) 1300 (PCB mounted) 100 (*2) 1000 (PCB mounted) -40~+85 -55~+125
UNITS V mA V V
mW (TJ=25 )
*2: The power dissipation figure shown is PCB mounted.
XC6216C Series
PARAMETER Input Voltage Output Current Output Voltage CE Input Voltage FB Voltage SOT-25 Power Dissipation SOT-89-5 USP-6C Operating Temperature Range Storage Temperature Range
*1: IOUT Pd / (VIN-VOUT) Please refer to pages 37 ~ 40 for details.
SYMBOL VIN IOUT VOUT VCE VOFB
Pd
Topr Tstg
RATINGS VSS-0.3~30 300 (*1) VSS-0.3~VIN+0.3 VSS-0.3 ~ 30 VSS-0.3 ~ 30 250 (*2) 600 (PCB mounted) 500 (*2) 1300 (PCB mounted) 100 (*2) 1000 (PCB mounted) -40~+85 -55~+125
UNITS V mA V V V
mW (TJ=25 )
*2: The power dissipation figure shown is PCB mounted.
XC6216D Series
PARAMETER Input Voltage Output Current Output Voltage SOT-89 Power Dissipation SOT-223 SYMBOL VIN IOUT VOUT Pd RATINGS VSS-0.3~30 300 (*1) VSS-0.3~VIN+0.3 500 300 1500 (PCB mounted) (*2) 500 -40~+85 -55~+125 UNITS V mA V mW (TJ=25 )
TO-252 Operating Temperature Range Storage Temperature Range
*1: IOUT Pd / (VIN-VOUT)
Topr Tstg
*2: The power dissipation figure shown is PCB mounted.
Please refer to pages 37 ~ 40 for details.
5/41
XC6216/XE6216 Series
ABSOLUTE MAXIMUM RATINGS (Continued)
XE6216B Series
PARAMETER Input Voltage Output Current Output Voltage CE Input Voltage
*The XE6216B in SOT-25 and USP-6C are under development.
SYMBOL
RATINGS
UNITS
VIN IOUT VOUT VCE
SOT-25
Power Dissipation
VSS-0.3 30 300 (*1) VSS-0.3 VIN+0.3 VSS-0.3 30 250
600 (PCB mounted) (*2)
V mA V V
SOT-89-5 USP-6C
Pd
500
1300 (PCB mounted) (*2)
mW TJ=25
100
1000 (PCB mounted) (*2)
Operating Temperature Range
Junction Temperature
Storage Temperature Range
*1: IOUT Pd / (VIN-VOUT)
Topr TJ Tstg
-40 +85 -40 +125 -55 +125
*2: The power dissipation figure shown is PCB mounted.
Please refer to pages 37 ~ 40 for details.
XE6216D Series
PARAMETER Input Voltage Output Current Output Voltage CE Input Voltage Power Dissipation
*Under Development
SYMBOL
RATINGS
UNITS
VIN IOUT VOUT VCE Pd Topr TJ Tstg
VSS-0.3 30 300 (*1) VSS-0.3 VIN+0.3 VSS-0.3 30 500 -40 +85 -40 +125 -55 +125
V mA V V mW TJ=25
SOT-89
Operating Temperature Range
Junction Temperature
Storage Temperature Range
*1: IOUT Pd / (VIN-VOUT)
6/41
XC6216/XE6216
Series
ELECTRICAL CHARACTERISTICS
XC6216B Series
PARAMETER Output Voltage Maximum Output Current SYMBOL VOUT(E) CONDITIONS MIN. TYP. E-0 150 100 50 90 MAX. IOUT=20mA, VCE=VIN VIN=VOUT(T)+3.0V, VCE=VIN (VOUT(T) 3.0V) IOUTMAX VIN=VOUT(T)+3.0V, VCE=VIN (VOUT(T) 3.0V) VIN=VOUT(T)+2.0V, 1mA IOUT 50mA, VCE=VIN, (2.0V VOUT(T) 7.0V) VOUT VIN=VOUT(T)+2.0V, 1mA IOUT 50mA, VCE=VIN, (7.1V VOUT(T) 12.0V) Vdif1 IOUT=20mA, VCE=VIN IOUT=100mA, VIN = VOUT(T)+3.0V, VCE=VIN Vdif2 (VOUT(T)<3.0V) IOUT=100mA, VCE=VIN (VOUT(T)<3.0V) ISS VCE=VIN Istby VCE=VSS VOUT / VOUT(T)+2.0V VIN 28.0V IOUT=5mA, VCE=VIN VIN VOUT(T) VOUT / VOUT(T)+2.0V VIN 28.0V IOUT=13mA, VCE=VIN VIN VOUT(T) VIN IOUT=20mA, VCE=VIN VOUT / Ta VOUT(T) -40 Ta 85 VIN=[VOUT(T)+2.0]V+0.5Vp-pAC PSRR IOUT=20mA, f=1kHz, VCE=VIN Ishort VIN=VOUT(T)+2.0V, VCE=VIN VCEH VIN=28.0V VCEL VIN=28.0V ICEH VIN=VCE=28.0V ICEL VIN=28.0V, VCE=VSS TTSD TTSR TTSD-TTSR Junction Temperature Junction Temperature Junction Temperature V mA mA mV Ta = 25 UNITS CIRCUIT
Load Regulation
-
110 E-1
140
mV mV
Dropout Voltage 1
Dropout Voltage 2
E-2
mV
Supply Current Stand-by Current Line Regulation 1 Line Regulation 2 Input Voltage Output Voltage Temperature Characteristics Ripple Rejection Rate Short Current CE "H" Level Voltage CE "L" Level Voltage CE "H" Level Current CE "L" Level Current Thermal Shutdown Detect Temperature Thermal Shutdown Release Temperature Hysteresis Width
NOTE: *1: VOUT(T): Specified output voltage *2: VOUT(E): Effective output voltage
1 0.01 0.03 2.0 1.1 0 -0.1 -0.1 -
5 0.01 0.05 0.15 100 30 30 150 125 25
9 0.10 0.10 0.30 28.0 28.0 0.35 0.1 0.1 -
A A %V %V V ppm/ dB mA V V A A -
-
(i.e. the output voltage when "VOUT(T)+2.0V" is provided at the VIN pin while maintaining a certain IOUT value.) *3: Vdif={VIN1
{Note 5}
- VOUT1
{Note 4}
}
*4: VOUT1: VOUT(T) VOUT(T)
3.0V, A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+3.0V} is input. 3.0V, A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+2.0V} is input.
*5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased. *6: Unless otherwise stated, VIN=VOUT(T)+2.0V.
7/41
XC6216/XE6216 Series
ELECTRICAL CHARACTERISTICS (Continued)
XC6216C Series
PARAMETER Output Voltage Divided Resistor Maximum Output Current Load Regulation Dropout Voltage1 Dropout Voltage2 Supply Current Stand-by Current Line Regulation1 SYMBOL VOUT(E) RFB IOUTMAX VOUT Vdif1 Vdif2 ISS Istby VOUT / VIN VOUT(T) VOUT / VIN VOUT(T) VIN VOUT / Ta VOUT(T) PSRR Ishort VCEH VCEL ICEH ICEL CONDITIONS IOUT=20mA, VCE=VIN, VOFB=VOUT VIN=VOUT=5.0V, VCE=VSS VOFB=VOUT VIN=5.0V, VCE=VIN , VOFB=VOUT VIN=4.0V 1mA IOUT 50mA, VCE=VIN, VOFB=VOUT IOUT=20mA, VCE=VIN, VOFB=VOUT IOUT=100mA, VIN=5.0V, VCE=VIN, VOFB=VOUT VCE=VIN, VOFB=VOUT VCE=VSS, VOFB=VOUT 4.0V VIN 28.0V, IOUT=5mA, VCE=VIN, VOFB=VOUT 4.0V VIN 28.0V, IOUT=13mA, VCE=VIN, VOFB=VOUT IOUT=20mA, VCE=VIN, -40 Ta 85 VIN=4.0V+0.5Vp-pAC, IOUT=20mA, f=1kHz, VCE=VIN VOFB=VOUT VIN=4.0V, VCE=VIN, VOFB=VOUT VIN=28.0V, VOFB=VOUT VIN=28.0V, VOFB=VOUT VIN=VCE=28.0V, VOFB=VOUT VIN=28.0V, VCE=VSS VOFB=VOUT Junction Temperature Junction Temperature Junction Temperature MIN. 1.96 1.70 100 1 TYP. 2.00 4.10 50 450 1900 5 0.01 0.05 MAX. 2.04 6.30 90 600 26009 0.10 0.10 UNITS V M mA mV mV mV A A %V Ta = 25 CIRCUIT
Line Regulation2 Input Voltage Output Voltage Temperature Characteristics Ripple Rejection Rate Short Current CE "H" Level Voltage CE "L" Level Voltage CE "H" Level Current CE "L" Level Current Thermal Shutdown Detect Temperature Thermal Shutdown Release Temperature Hysteresis Width
NOTE:
2.0 1.1 0 -0.1 -0.1
0.15 100 30 30 -
0.30 28.0 28.0 0.5 0.1 0.1
%V V ppm/ dB mA V V A A -
TTSD TTSR TTSD-TTSR
-
150 125 25
-
*1: VOUT(T): Specified output voltage *2: VOUT(E): Effective output voltage (i.e. the output voltage when "VOUT(T)+2.0V" is provided at the VIN pin while maintaining a certain IOUT value.) *3: Vdif={VIN1
{Note 5}
- VOUT1
{Note 4}
}
*4: VOUT1: A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+3.0V} is input. *5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased. *6: Unless otherwise stated, VIN=VOUT(T)+2.0V.
8/41
XC6216/XE6216
Series
ELECTRICAL CHARACTERISTICS (Continued)
XC6216D Series
PARAMETER Output Voltage SYMBOL VOUT(E) CONDITIONS IOUT=20mA VIN=VOUT(T)+3.0V, (VOUT(T) 3.0V) VIN=VOUT(T)+3.0V, (VOUT(T) 3.0V) VIN=VOUT(T)+2.0V 1mA IOUT 50mA ( 2.0V VOUT(T) 7.0V ) VIN=VOUT(T)+2.0V 1mA IOUT 50mA ( 7.1 VOUT(T) 12.0V ) IOUT=20mA IOUT=100mA, VIN=VOUT(T)+3.0V (VOUT(T) 3.0V) IOUT=100mA, (VOUT(T) 3.0V) VOUT(T)+2.0V VIN 28.0V IOUT=5mA VOUT(T)+2.0V VIN 28.0V IOUT=13mA IOUT=20mA, VCE=VIN -40 Ta 85 VIN=[VOUT(T)+2.0]V+0.5Vp-pAC IOUT=20mA, f=1kHz VIN=VOUT(T)+2.0V Junction Temperature Junction Temperature Junction Temperature 150 100 MIN. TYP. E-0 MAX. UNITS V mA mA Ta = 25 CIRCUIT
Maximum Output Current
IOUTMAX
-
50
90
mV
Load Regulation
VOUT
-
110 E-1 E-2
140
mV mV mV A %V %V V ppm/ dB mA -
Dropout Voltage1 Dropout Voltage2 Supply Current Line Regulation1 Line Regulation2 Input Voltage Output Voltage Temperature Characteristics Ripple Rejection Rate Short Current Thermal Shutdown Detect Temperature Thermal Shutdown Release Temperature Hysteresis Width
NOTE:
Vdif1 Vdif2 ISS VOUT / VIN VOUT(T) VOUT / VIN VOUT(T) VIN VOUT / Ta VOUT(T) PSRR Ishort TTSD TTSR TTSD-TTSR
1 2.0 -
5 0.05 0.15 100 30 30 150 125 25
9 0.10 0.30 28.0 -
*1: VOUT(T): Specified output voltage *2: VOUT(E): Effective output voltage (i.e. the output voltage when "VOUT(T)+2.0V" is provided at the VIN pin while maintaining a certain IOUT value.) *3: Vdif={VIN1
{Note 5}
- VOUT1
{Note 4}
}
*4: VOUT1: VOUT(T) VOUT(T)
3.0V, A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+3.0V} is input. 3.0V, A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+2.0V} is input.
*5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased. *6: Unless otherwise stated, VIN=VOUT(T)+2.0V.
9/41
XC6216/XE6216 Series
ELECTRICAL CHARACTERISTICS (Continued)
Voltage Chart
PARAMETER OUTPUT VOLTAGE (V) 2% ACCURACY VOUT MIN. 1.960 2.058 2.156 2.254 2.352 2.450 2.548 2.646 2.744 2.842 2.940 3.038 3.136 3.234 3.332 3.430 3.528 3.626 3.724 3.822 3.920 4.018 4.116 4.214 4.312 4.410 4.508 4.606 4.704 4.802 MAX. 2.040 2.142 2.244 2.346 2.448 2.550 2.652 2.754 2.856 2.958 3.060 3.162 3.264 3.366 3.468 3.570 3.672 3.774 3.876 3.978 4.080 4.182 4.284 4.386 4.488 4.590 4.692 4.794 4.896 4.998 MIN. 1.980 2.079 2.178 2.277 2.376 2.475 2.574 2.673 2.772 2.871 2.970 3.069 3.168 3.267 3.366 3.465 3.564 3.663 3.762 3.861 3.960 4.059 4.158 4.257 4.356 4.455 4.554 4.653 4.752 4.851 E-0 OUTPUT VOLTAGE (V) 1% ACCURACY VOUT MAX. 2.020 2.121 2.222 2.323 2.424 2.525 2.626 2.727 2.828 2.929 3.030 3.131 3.232 3.333 3.434 3.535 3.636 3.737 3.838 3.939 4.040 4.141 4.242 4.343 4.444 4.545 4.646 4.747 4.848 4.949 TYP. 450 450 390 390 390 310 310 310 310 310 260 260 260 260 260 260 260 260 260 260 220 220 220 220 220 220 220 220 220 220 E-1 DROPOUT VOLTAGE 1 (mV) IOUT=20mA Vdif1 MAX. 600 600 520 520 520 450 450 450 450 450 360 360 360 360 360 360 360 360 360 360 320 320 320 320 320 320 320 320 320 320 TYP. 1900 1900 1700 1700 1700 1500 1500 1500 1500 1500 1300 1300 1300 1300 1300 1300 1300 1300 1300 1300 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100 E-2 DROPOUT VOLTAGE 2 (mV) IOUT=100mA Vdif2 MAX. 2600 2600 2200 2200 2200 1900 1900 1900 1900 1900 1700 1700 1700 1700 1700 1700 1700 1700 1700 1700 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500
NOMINAL OUTPUT VOLTAGE VOUT(T) (V) 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9
10/41
XC6216/XE6216
Series
ELECTRICAL CHARACTERISTICS (Continued)
Voltage Chart (Continued)
PARAMETER OUTPUT VOLTAGE (V) 2% ACCURACY VOUT MIN. 4.900 4.998 5.096 5.194 5.292 5.390 5.488 5.586 5.684 5.782 5.880 5.978 6.076 6.174 6.272 6.370 6.468 6.566 6.664 6.762 6.860 6.958 7.056 7.154 7.252 7.350 7.448 7.546 7.644 7.742 7.840 MAX. 5.100 5.202 5.304 5.406 5.508 5.610 5.712 5.814 5.916 6.018 6.120 6.222 6.324 6.426 6.528 6.630 6.732 6.834 6.936 7.038 7.140 7.242 7.344 7.446 7.548 7.650 7.752 7.854 7.956 8.058 8.160 MIN. 4.950 5.049 5.148 5.247 5.346 5.445 5.544 5.643 5.742 5.841 5.940 6.039 6.138 6.237 6.336 6.435 6.534 6.633 6.732 6.831 6.930 7.029 7.128 7.227 7.326 7.425 7.524 7.623 7.722 7.821 7.920 E-0 OUTPUT VOLTAGE (V) 1% ACCURACY VOUT MAX. 5.050 5.151 5.252 5.353 5.454 5.555 5.656 5.757 5.916 5.959 6.060 6.161 6.262 6.363 6.464 6.565 6.666 6.767 6.868 6.969 7.070 7.171 7.272 7.373 7.474 7.575 7.676 7.777 7.878 7.979 8.080 TYP. 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 E-1 DROPOUT VOLTAGE 1 (mV) IOUT=20mA Vdif1 MAX. 280 280 280 280 280 280 280 280 280 280 280 280 280 280 280 230 230 230 230 230 230 230 230 230 230 230 230 230 230 230 230 TYP. 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 E-2 DROPOUT VOLTAGE 2 (mV) IOUT=100mA Vdif2 MAX. 1300 1300 1300 1300 1300 1300 1300 1300 1300 1300 1300 1300 1300 1300 1300 1150 1150 1150 1150 1150 1150 1150 1150 1150 1150 1150 1150 1150 1150 1150 1150
NOMINAL OUTPUT VOLTAGE VOUT(T) (V) 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 8.0
11/41
XC6216/XE6216 Series
ELECTRICAL CHARACTERISTICS (Continued)
Voltage Chart (Continued)
PARAMETER OUTPUT VOLTAGE (V) 2% ACCURACY VOUT MIN. 7.938 8.036 8.134 8.232 8.330 8.428 8.526 8.624 8.722 8.820 8.918 9.016 9.114 9.212 9.310 9.408 9.506 9.604 9.702 9.800 9.898 9.996 10.094 10.192 10.290 10.388 10.486 10.584 10.682 10.780 10.878 10.976 11.074 11.172 11.270 11.368 11.466 11.564 11.662 11.760 MAX. 8.262 8.364 8.466 8.568 8.670 8.772 8.874 8.976 9.078 9.180 9.282 9.384 9.486 9.588 9.690 9.792 9.894 9.996 10.098 10.200 10.302 10.404 10.506 10.608 10.710 10.812 10.914 11.016 11.118 11.220 11.322 11.424 11.526 11.628 11.730 11.832 11.934 12.036 12.138 12.240 MIN. 8.019 8.118 8.217 8.316 8.415 8.514 8.613 8.712 8.811 8.910 9.009 9.108 9.207 9.306 9.405 9.504 9.603 9.702 9.801 9.900 9.999 10.098 10.197 10.296 10.395 10.494 10.593 10.692 10.791 10.890 10.989 11.088 11.187 11.286 11.385 11.484 11.583 11.682 11.781 11.880 E-0 OUTPUT VOLTAGE (V) 1% ACCURACY VOUT MAX. 8.181 8.282 8.383 8.484 8.585 8.686 8.787 8.888 8.989 9.090 9.191 9.292 9.393 9.494 9.595 9.696 9.797 9.898 9.999 10.100 10.201 10.302 10.403 10.504 10.605 10.706 10.807 10.908 11.009 11.110 11.211 11.312 11.413 11.514 11.615 11.716 11.817 11.918 12.019 12.120 TYP. 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 E-1 DROPOUT VOLTAGE 1 (mV) IOUT=20mA Vdif1 MAX. 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 TYP. 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 E-2 DROPOUT VOLTAGE 2 (mV) IOUT=100mA Vdif2 MAX. 950 950 950 950 950 950 950 950 950 950 950 950 950 950 950 950 950 950 950 950 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850
NOMINAL OUTPUT VOLTAGE VOUT(T) (V) 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9.0 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 10.0 10.1 10.2 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8 11.9 12.0
12/41
XC6216/XE6216
Series
ELECTRICAL CHARACTERISTICS (Continued)
XE6216B Series
PARAMETER Output Voltage Maximum Output Current(*) Load Regulation(*) Dropout Voltage1 Dropout Voltage2(*) Supply Current Stand-by Current Line Regulation1(*) Line Regulation2(*) Input Voltage Output Voltage Temperature Characteristics Ripple Rejection Rate Short Current CE "H" Level Voltage CE "L" Level Voltage CE "H" Level Current CE "L" Level Current Thermal Shutdown Detect Temperature Thermal Shutdown Release Temperature Hysteresis Width
NOTE: *1: VOUT(T): Specified output voltage *2: VOUT(E): Effective output voltage (i.e. the output voltage when "VOUT(T)+2.0V" is provided at the VIN pin while maintaining a certain IOUT value.) *3: Vdif={VIN1
{Note 5}
SYMBOL VOUT(E)
CONDITIONS IOUT20mA , VCE=VIN VINVOUT(T)+3.0V, VCE=VIN (VOUT(T)3.0 VIN = VOUT(T)+3.0V, VCE=VIN (VOUT(T)3.0 VINVOUT(T)+2.0V, VCE=VIN 1mAIOUT50mA IOUT20mA, VCE=VIN IOUT100mA, VCE=VIN VCE=VIN VCE=VSS VOUT(T)+2.0VVIN28.0V IOUT=5mA, VCE=VIN VOUT(T)+2.0VVIN28.0V IOUT=13mA, VCE=VIN
Ta=25 MIN. TYP. E-0-1 E-1-1 E-2-1 E-3-1 1 2.0 5 0.01 0.05 0.15 9 0.1 0.10 0.30 28.0 100 350 MAX.
Ta=-4085 MIN. TYP. E-0-2 150 100 E-1-2 E-2-2 E-3-2 0.5 2.0 5 0.01 0.05 0.15 10 4 0.12 0.32 28.0 MAX.
UNITS CIRCUIT V mA mA mV mV mV A A %/V %/V V ppm/
IOUTMAX
VOUT Vdif1 Vdif2 ISS Istby VOUT/ VIN*VOUT(T) VOUT/ VIN*VOUT(T) VIN VOUT/ Ta*VOUT(T) PSRR Ishort VCEH VCEL ICEH ICEL TTSD TTSR TTSD - TTSR
IOUT20mA, VCE=VIN -40Ta85 VIN=[VOUT(T)+2.0]V+0.5Vp-pAC, IOUT20mA, 1kHz , VCE=VIN VIN=VOUT(T)+2.0V, VCE=VIN VIN=28.0V VIN=28.0V VIN=VCE=28.0V VIN=28.0V, VCE=VSS Junction Temperature Junction Temperature Junction Temperature
-
-0.1 -0.1 -
30 30 150 125 25
0.1 0.1 -
1.1 0 -0.1 -0.2 -
30 30 150 125 25
28.0 0.35 0.7 -0.2 -
dB mA V V A A
-
- VOUT1
{Note 4}
}
*4: VOUT1: VOUT(T) VOUT(T)
3.0V, A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+3.0V} is input. 3.0V, A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+2.0V} is input.
*5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased. *6: Unless otherwise stated, VIN=VOUT(T)+2.0V. Junction temperature range is Tj=-40 125 for this table.
13/41
XC6216/XE6216 Series
ELECTRICAL CHARACTERISTICS (Continued)
XE6216D Series
PARAMETER Output Voltage Maximum Output Current(*) Under Development SYMBOL VOUT(E) CONDITIONS IOUT20mA VINVOUT(T)+3.0V (VOUT(T)3.0 VIN = VOUT(T)+3.0V (VOUT(T)3.0 VINVOUT(T)+2.0V 1mAIOUT50mA IOUT20mA IOUT100mA 1 VOUT(T)+2.0VVIN28.0V IOUT=5mA VOUT(T)+2.0VVIN28.0V IOUT=13mA 2.0 IOUT20mA -40Ta85 VIN=[VOUT(T)+2.0]V+0.5Vp-pAC, IOUT20mA, 1kHz VIN=VOUT(T)+2.0V Junction Temperature Junction Temperature Junction Temperature 100 Ta=25 MIN. TYP. E-0-1 E-1-1 150 100 MAX. Ta=-4085 MIN. TYP. E-0-2 E-1-2 MAX. UNITS CIRCUIT V mA mA mV
I OUTMAX
Load Regulation(*)
VOUT
Dropout Voltage1 Dropout Voltage2(*) Supply Current Line Regulation1(*) Line Regulation2(*) Input Voltage Output Voltage Temperature Characteristics Ripple Rejection Rate Short Current Thermal Shutdown Detect Temperature Thermal Shutdown Release Temperature Hysteresis Widht
Vdif1 Vdif2 ISS VOUT/ VIN*VOUT(T) VOUT/ VIN*VOUT(T) VIN VOUT/ Ta*VOUT(T) PSRR Ishort TTSD TTSR TTSD - TTSR
E-2-1 E-3-1 5 0.05 0.15 9 0.10 0.30 28.0 350 0.5 2.0 -
E-2-2 E-3-2 5 0.05 0.15 10 0.12 0.32 28.0 -
mV mV A %/V %/V V ppm/

-
30 30 150 125 25
-
-
30 30 150 125 25
-
dB mA
-
NOTE: *1: VOUT(T): Specified output voltage *2: VOUT(E): Effective output voltage (i.e. the output voltage when "VOUT(T)+2.0V" is provided at the VIN pin while maintaining a certain IOUT value.) *3: Vdif={VIN1
{Note 5}
- VOUT1
{Note 4}
}
*4: VOUT1: VOUT(T) VOUT(T)
3.0V, A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+3.0V} is input. 3.0V, A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT{VOUT(T)+2.0V} is input.
*5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased. *6: Unless otherwise stated, VIN=VOUT(T)+2.0V. Junction temperature range is Tj=-40 125 for this table.
14/41
XC6216/XE6216
Series
ELECTRICAL CHARACTERISTICS (Continued)
Voltage Chart 1 (XE6216 Series)
SYMBOL Temperature / Ta
PARAMETER NOMINAL OUTPUT VOLTAGE
E-0-1 25
E-0-2 -40 85
SYMBOL Temperature / Ta
PARAMETER
E-0-1 25
E-0-2 -40 85
OUTPUT VOLTAGE (V) OUTPUT VOLTAGE (V) Accuracy +3% , -3.5% Accuracy 2% VOUT MIN. 1.960 2.058 2.156 2.254 2.352 2.450 2.548 2.646 2.744 2.842 2.940 3.038 3.136 3.234 3.332 3.430 3.528 3.626 3.724 3.822 3.920 4.018 4.116 4.214 4.312 4.410 4.508 4.606 4.704 4.802 MAX. 2.040 2.142 2.244 2.346 2.448 2.550 2.652 2.754 2.856 2.958 3.060 3.162 3.264 3.366 3.468 3.570 3.672 3.774 3.876 3.978 4.080 4.182 4.284 4.386 4.488 4.590 4.692 4.794 4.896 4.998 MIN. 1.930 2.027 2.123 2.220 2.316 2.413 2.509 2.606 2.702 2.799 2.895 2.992 3.088 3.185 3.281 3.378 3.474 3.571 3.667 3.764 3.860 3.957 4.053 4.150 4.246 4.342 4.439 4.535 4.632 4.728 VOUT MAX. 2.060 2.163 2.266 2.369 2.472 2.575 2.678 2.781 2.884 2.987 3.090 3.193 3.296 3.399 3.502 3.605 3.708 3.811 3.914 4.017 4.120 4.223 4.326 4.429 4.532 4.635 4.738 4.841 4.944 5.047
NOMINAL OUTPUT VOLTAGE
OUTPUT VOLTAGE (V) OUTPUT VOLTAGE (V) Accuracy +3% , -3.5% Accuracy 2% VOUT MIN. 4.900 4.998 5.096 5.194 5.292 5.390 5.488 5.586 5.684 5.782 5.880 5.978 6.076 6.174 6.272 6.370 6.468 6.566 6.664 6.762 6.860 6.958 7.056 7.154 7.252 7.350 7.448 7.546 7.644 7.742 MAX. 5.100 5.202 5.304 5.406 5.508 5.610 5.712 5.814 5.916 6.018 6.120 6.222 6.324 6.426 6.528 6.630 6.732 6.834 6.936 7.038 7.140 7.242 7.344 7.446 7.548 7.650 7.752 7.854 7.956 8.058 MIN. 4.825 4.921 5.018 5.114 5.211 5.307 5.404 5.500 5.597 5.693 5.790 5.886 5.983 6.079 6.176 6.272 6.369 6.465 6.562 6.658 6.755 6.851 6.948 7.044 7.141 7.237 7.334 7.430 7.527 7.623 VOUT MAX. 5.150 5.253 5.356 5.459 5.562 5.665 5.768 5.871 5.974 6.077 6.180 6.283 6.386 6.489 6.592 6.695 6.798 6.901 7.004 7.107 7.210 7.313 7.416 7.519 7.622 7.725 7.828 7.931 8.034 8.137
VOUT(T) (V) 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9
VOUT(T) (V) 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9
15/41
XC6216/XE6216 Series
ELECTRICAL CHARACTERISTICS (Continued)
Voltage Chart 2 (XE6216 Series)
SYMBOL Temperature /Ta
PARAMETER NOMINAL OUTPUT VOLTAGE
E-0-1 25
E-0-2 -40 85
OUTPUT VOLTAGE (V) OUTPUT VOLTAGE (V) Accuracy +3% , -3.5% Accuracy 2% VOUT MIN. MAX. 7.840 8.160 7.938 8.262 8.036 8.364 8.134 8.466 8.232 8.568 8.330 8.670 8.428 8.772 8.526 8.874 8.624 8.976 8.722 9.078 8.820 9.180 8.918 9.282 9.016 9.384 9.114 9.486 9.212 9.588 9.310 9.690 9.408 9.792 9.506 9.894 9.604 9.996 9.702 10.098 9.800 10.200 9.898 10.302 9.996 10.404 10.094 10.506 10.192 10.608 10.290 10.710 10.388 10.812 10.486 10.914 10.584 11.016 10.682 11.118 10.780 11.220 10.878 10.976 11.074 11.172 11.270 11.368 11.466 11.564 11.662 11.760 11.322 11.424 11.526 11.628 11.730 11.832 11.934 12.036 12.138 12.240 VOUT MIN. MAX. 7.720 8.240 7.816 8.343 7.913 8.446 8.009 8.549 8.106 8.652 8.202 8.755 8.299 8.858 8.395 8.961 8.492 9.064 8.588 9.167 8.685 9.270 8.781 9.373 8.878 9.476 8.974 9.579 9.071 9.682 9.167 9.785 9.264 9.888 9.360 9.991 9.457 10.094 9.553 10.197 9.650 10.300 9.747 10.403 9.843 10.506 9.940 10.609 10.036 10.712 10.133 10.815 10.229 10.918 10.326 11.021 10.422 11.124 10.519 11.227 10.615 11.330 10.712 10.808 10.905 11.001 11.098 11.194 11.291 11.387 11.484 11.580 11.433 11.536 11.639 11.742 11.845 11.948 12.051 12.154 12.257 12.360
VOUT(T) (V) 8.0 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9.0 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 10.0 10.1 10.2 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8 11.9 12.0
16/41
XC6216/XE6216
Series
ELECTRICAL CHARACTERISTICS (Continued)
Voltage Chart 3 (XE6216 Series)
SYMBOL Temperature /Ta
PARAMETER NOMINAL OUTPUT VOLTAGE
E-1-1 25 LOAD REGULATION (mV) VOUT TYP. MAX.
E-1-2 -4085 LOAD REGULATION (mV) VOUT TYP. MAX. TYP. 450
E-2-1 25
E-2-2 -4085
E-3-1 25
E-3-2 -4085
DROPOUT VOLTAGE 1 DROPOUT VOLTAGE 1 DROPOUT VOLTAGE 2 DROPOUT VOLTAGE 2 (mV) (mV) (mV) (mV) IOUT=20mA IOUT=20mA IOUT=100mA IOUT=100mA Vdif1 MAX. 600 TYP. 450 Vdif1 MAX. 735 Vdif2 TYP. 1900 MAX. 2600 TYP. 1900 Vdif2 MAX. 3060
VOUT(T) (V) 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9
390
520
390
675
1700
2200
1700
2760
310
450
310
620
1500
1900
1500
2620
50
90
50
103
260
360
260
520
1300
1700
1300
2370
220
320
220
410
1100
1500
1100
2045
17/41
XC6216/XE6216 Series
ELECTRICAL CHARACTERISTICS (Continued)
Voltage Chart 4 (XE6216 Series)
SYMBOL Temperature / Ta
PARAMETER NOMINAL OUTPUT VOLTAGE
E-1-1 25 LOAD REGULATION (mV) VOUT TYP. MAX.
E-1-2 -4085 LOAD REGULATION (mV) VOUT TYP. MAX. TYP.
E-2-1 25
E-2-2 -4085
E-3-1 25
E-3-2 -4085
DROPOUT VOLTAGE 1 DROPOUT VOLTAGE 1 DROPOUT VOLTAGE 2 DROPOUT VOLTAGE 2 (mV) (mV) (mV) (mV) IOUT=20mA IOUT=20mA IOUT=100mA IOUT=100mA Vdif1 MAX. TYP. Vdif1 MAX. Vdif2 TYP. MAX. TYP. Vdif2 MAX.
VOUT(T) (V) 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 8.0
190
280
190
380
1000
1300
1000
1730
50
90
50
103
170
230
170
340
800
1150
800
1580
110
140
110
150
18/41
XC6216/XE6216
Series
ELECTRICAL CHARACTERISTICS (Continued)
Voltage Chart 5 (XE6216 Series)
SYMBOL Temperature / Ta
PARAMETER NOMINAL OUTPUT VOLTAGE
E-1-1 25 LOAD REGULATION (mV) VOUT TYP. MAX.
E-1-2 -4085 LOAD REGULATION (mV) VOUT TYP. MAX. TYP.
E-2-1 25
E-2-2 -4085
E-3-1 25
E-3-2 -4085
DROPOUT VOLTAGE 1 DROPOUT VOLTAGE 1 DROPOUT VOLTAGE 2 DROPOUT VOLTAGE 2 (mV) (mV) (mV) (mV) IOUT=20mA IOUT=20mA IOUT=100mA IOUT=100mA Vdif1 MAX. TYP. Vdif1 MAX. Vdif2 TYP. MAX. TYP. Vdif2 MAX
VOUT(T) (V) 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9.0 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 10.0 10.1 10.2 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8 11.9 12.0
130
190
130
320
700
950
700
1460
110
140
110
150
120
160
120
285
650
850
650
1160
19/41
XC6216/XE6216 Series
OPERATIONAL EXPLANATION
The voltage divided by resistors R11 & R12 is compared with the internal reference voltage by the error amplifier. The P-channel MOSFET which is connected to the VOUT pin is then driven by the subsequent output signal. The output voltage at the VOUT pin is controlled and stabilized by a system of negative feedback. The current limit circuit and short protect circuit operate in relation to the level of output current and heat dissipation. Further, the IC's internal circuitry can be shutdown via the CE pin's signal.

The XC6216/XE6216 series includes a current fold-back circuit as a short circuit protection. When the load current reaches the current limit level, the current fold-back circuit operates and output voltage drops. The output voltage drops further and output current decreases. When the output pin is shorted, a current of about 30mA flows. The IC's internal circuitry can be shutdown via the signal from the CE pin with the XC6216/XE6216 series. In shutdown mode, output at the VOUT pin will be pulled down by R11 and R12 to the VSS level. Note that as the XC6216/XE6216 series is `High Active/No pull down', operations will become unstable with the CE pin open. We suggest that you use this IC with either a VIN voltage or a VSS voltage input at the CE pin. If this IC is used with the correct specifications for the CE pin, the operational logic is fixed and the IC will operate normally. However, supply current may increase as a result of through current in the IC's internal circuitry if a medium voltage is applied. When the junction temperature of the built-in driver transistor reaches the temperature limit level (150 TYP.), the thermal shutdown circuit operates and the driver transistor will be set to OFF. The IC resumes its operation when the thermal shutdown function is released and the IC's operation is automatically restored because the junction temperature drops to the level of the thermal shutdown release voltage. For the stable operation of the IC, over 2.0V of input voltage is necessary. The output voltage may not be generated normally if the input voltage is less than 2.0V.
20/41
XC6216/XE6216
Series
NOTES ON USE
Please use this IC within the stated absolute maximum ratings. The IC is liable to malfunction should the ratings be exceeded. 2 Where wiring impedance is high, operations may become unstable due to the noise and/or phase lag depending on output current. Please strengthen VIN and VSS wiring in particular. 3. Phase compensation inside the IC is performed in the XC6216/XE6216 series. Therefore, an abnormal oscillation does not occur even if there is no output capacitor CL. An input capacitor CIN around 0.1uF~1.0uF between the VIN pin and the VSS pin is required for input stability. Also, the output voltage fluctuation such as under shoot or over shoot, which occurs because of the load change can be controlled by placing the output capacitor CL around 0.1uF~1.0uF between the VOUT pin and VSS pin. The input capacitor (CIN) and the output capacitor (CL) should be placed to the IC as close as possible with a shorter wiring. 4. Notes on Setting Output Voltage Externally (C type) Ta=25 1
The output voltage can be set externally by the following equation: VOUT=2.0V x (Rxx + Ryy) / Ryy ................................................................................. Although the output voltage can be set freely by the above equation, resistance values can be calculated by the following equations in case considering output voltage accuracy. Ixx = IFB + Iyy ................................................................................. Iyy = 2.0V / Ryy ................................................................................. If the equation (3) is assigned to the equation (2), the equation becomes as below: Ixx =IFB + 2.0V / Ryy ................................................................................. For this, the following equation can be used for setting output voltage externally: VOUT=2.0V + Rxx Ixx ................................................................................. And the equation (4) will be; VOUT=2.0V + Rxx (IFB + 2.0V / Ryy) ................................................................................. =2.0V x (1 + Rxx / Ryy) + Rxx IFB ................................................................................. The second term of the equation (6), Rxx IFB, is the cause of the output accuracy error. The IFB can be calculated by the following equation: IFB=2.0V / RFB ................................................................................. The cause of the output accuracy error, Rxx IFB can be calculated by the equation below; Rxx IFB = Rxx 2.0V / Ryy = 2.0V x Rxx RFB ................................................................................. Accordingly, if Rxx is smaller than RFB, the output voltage error becomes minute.
(1) (2) (3) (4) (5) (6) (7) (8)
Setting Resistance-Dependant of XC6216 Series' Output Voltage
21/41
XC6216/XE6216 Series
TEST CIRCUITS
Circuit XC6216B/XE6216B Series XC6216C/XE6216C Series
XC6216D/XE6216D Series
Circuit XC6216B/XE6216B Series XC6216C/XE6216C Series
XC6216D/XE6216D Series
Circuit XC6216B/XE6216B Series XC6216C/XE6216C Series
XC6216D/XE6216D Series
Circuit XC6216C/XE6216C Series
22/41
XC6216/XE6216
Series
TYPICAL PERFORMANCE CHARACTERISTICS
(1) Output Voltage vs. Output Current
XC6216B/C/D 202 2.5
VIN=VCE=5.0V, Ta=25, CIN=CL=1.0F (ceramic)
XC6216B/C/D 202 2.5
Ta=25, CIN=CL=1.0F (ceramic)
Output Voltage: VOUT (V)
1.5
Output Voltage: VOUT (V)
2.0
2.0
1.5
1.0 Ta=-40 0.5 Ta=25 Ta=85 0.0 0 50 100 150 200 250 300 Output Current: IOUT (mA) XC6216B/D 332 4.0 3.5
VIN=VCE=6.3V, Ta=25, CIN=CL=1.0F (ceramic)
1.0 VIN=3V 0.5 VIN=4V VIN=5V 0.0 0 50 100 150 200 250 300 Output Currrent: IOUT (mA) XC6216B/D 332 4.0 3.5
Ta=25, CIN=CL=1.0F (ceramic)
Output Voltage : VOUT (V) Output Voltage: VOUT (V)
3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 50 100 150 200 Ta=-40 Ta=25 Ta=85 250 300
Output Voltage: VOUT (V) Output Voltage: VOUT(V)
3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 50 100 150 200 250 Output Current: IOUT (mA) IOUT (mA) XC6216B/D 502 6.0 5.0 4.0 3.0 2.0 VIN=6V 1.0 0.0 VIN=7V VIN=8V
Ta=25, CIN=CL=1.0F (ceramic)
VIN=4.3V VIN=5.3V VIN=6.3V 300
Output Current: IOUT Output Current : IOUT (mA) XC6216B/D 502 6.0 5.0 Output Voltage : VOUT (V) Output Voltage: VOUT 4.0 3.0 2.0 Ta=-40 1.0 0.0 0 50 100 150 200 250 Output Current : IOUT (mA) Output Current: IOUT (mA) 300 Ta=25 Ta=85 0 50
VIN=VCE=8.0V, Ta=25, CIN=CL=1.0F (ceramic)
Output Voltage: VOUT (V) Output Voltage : VOUT (V)
100 150 200 250 Output Current: IOUT Output Current : IOUT (mA)
300
23/41
XC6216/XE6216 Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(1) Output Voltage vs. Output Current (Continued)
XC6216B/D C02 14 12 Output Voltage : VOUT (V) Output Voltage: VOUT 10 8 6 4 2 0 0 50 100 150 200 250 Output Current: IOUT Output Current : IOUT (mA) 300 Output Voltage : VOUT(V) Output Voltage: VOUT (V)
VIN=VCE=15.0V, Ta=25, CIN=CL=1.0F (ceramic)
XC6216B/D C02 14 12 10 8 6 4 2 0 0 50 100 150 200 250 Current: IOUT (mA) Output Current : IOUT (mA) 300 VIN=13V VIN=14V VIN=15V
Ta=25, CIN=CL=1.0F (ceramic)
Ta=-40 Ta=25 Ta=85
(2) Output Voltage vs. Input Voltage
XC6216B/C/D 202 2.1 2.0 Output Voltage : VOUT (V) Output Voltage: VOUT 1.9 1.8 1.7 IOUT=1mA 1.6 1.5 1.5 2 2.5 3 Input Voltage: VIN (V) Input Voltage: VIN (V) Input Voltage: VIN (V) 3.5 4 IOUT=10mA IOUT=30mA 1.5 4 8 12 16 20 24 28 Input Voltage: VIN (V) Input Voltage : VIN (V) Output Voltage: VOUT Output Voltage : VOUT (V)
Ta=25, CIN=CL=1.0F (ceramic)
XC6216B/C/D 202 2.1 2.0 1.9 1.8 1.7 1.6
Ta=25, CIN=CL=1.0F (ceramic)
IOUT=1mA IOUT=10mA IOUT=30mA
XC6216B/D 332
Ta=25, CIN=CL=1.0uF(ceramic)
XC6216B/D 332
Ta=25, CIN=CL=1.0uF(ceramic)
3.4 3.3 Output Voltage : VOUT (V) 3.2 3.1 3
IOUT=1mA
3.4 3.3 Output Voltage : VOUT (V) 3.2 3.1 3
IOUT=1mA
2.9 2.8 2.8 3.3 3.8 4.3
IOUT=10mA IOUT=30mA
2.9 2.8
IOUT=10mA IOUT=30mA
4.8
5.3
4
8
12
16
20
24
28
Input Voltage : VIN (V)
Input Voltage : VIN (V)
24/41
XC6216/XE6216
Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(2) Output Voltage vs. Input Voltage (Continued)
XC6216B/D 502 5.2 5.0 Output Voltage: VOUT (V) Output Voltage : VOUT(V) 4.8 4.6 4.4 IOUT=1mA 4.2 4.0 4 4.5 5 5.5 6 6.5 Input Voltage: VIN (V) Input Voltage : VIN (V) IOUT=10mA IOUT=30mA 4.0 8 12 Output Voltage: VOUT (V) Output Voltage : VOUT(V)
Ta=25, CIN=CL=1.0F (ceramic)
XC6216B/D 502 5.2 5.0 4.8 4.6 4.4 IOUT=1mA 4.2 IOUT=10mA IOUT=30mA 16 20 24 28
Ta=25, CIN=CL=1.0F (ceramic)
Input Voltage: VIN (V) Input Voltage : VIN (V)
XC6216B/D C02 13.0 12.5 Output Voltage: VOUT (V) Output Voltage : VOUT (V) 12.0 11.5 11.0 IOUT=1mA 10.5 10.0 10 11 12 13 Input Voltage: VIN (V) Input Voltage : VIN (V) 14 IOUT=10mA IOUT=30mA 10.0 14 16 18 Output Voltage: VOUT (V) Output Voltage : VOUT (V)
Ta=25, CIN=CL=1.0F (ceramic)
XC6216B/D C02 12.5
Ta=25, CIN=CL=1.0F (ceramic)
12.0
11.5
11.0 IOUT=1mA 10.5 IOUT=10mA IOUT=30mA
20
22
24
26
28
Input Voltage : VIN (V) Input Voltage: VIN (V)
(3) Dropout Voltage vs. Output Current
XC6216B/C/D 202 3.0 Input/Output Difference Voltage (V) Dropout Voltage : VDIF : VDIF (V) 2.5 2.0 1.5 1.0 0.5 0.0 0 25 50 75 100 125 150 Output Current: IOUT (mA) Output Current : IOUT (V) Ta=-40 Ta=25 Ta=85
CIN=CL=1.0uF (ceramic)
XC6216B/D 332 3.0 Dropout Voltage VDIF (V) Input/Output Difference :Voltage : VDIF (V) 2.5 2.0 1.5 1.0 0.5 0.0 0 25 50 75 100 125 Output Current : IOUT (mA) Output Current: IOUT (V) 150 Ta=-40 Ta=25 Ta=85
CIN=CL=1.0uF (ceramic)
25/41
XC6216/XE6216 Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(3) Dropout Voltage vs. Output Current
XC6216B/D 502 3.0 Dropout Voltage: VDIF : VDIF (V) Input/Output Difference Voltage(V) Ta=-40 2.5 2.0 1.5 1.0 0.5 0.0 0 25 50 75 100 125 Output Current : IOUT (V) Output Current: IOUT (mA) 150 Ta=25 Ta=85
CIN=CL=1.0uF(ceramic)
XC6216B/D C02 3.0 Input/Output Difference Voltage (V) Dropout Voltage : VDIF : VDIF (V) 2.5 2.0 1.5 1.0 0.5 0.0 0 25 50 75 100 125 150 Output Current : IOUT (V) Output Current: IOUT (mA) Ta=-40 Ta=25 Ta=85
CIN=CL=1.0uF (ceramic)
(4) Supply Current vs. Input Voltage
XC6216B/C/D 202 10 9 8 Supply Current : ISS (A) Current: ISS (uA) 7 6 5 4 3 2 1 0 0 4 8 12 16 20 Input Voltage : VIN (V) Input Voltage:
XC6216B/D 332 10 9 Supply Current : ISS (uA) Supply Current: ISS (A) Supply Current : ISS (A) Current: ISS (uA) 8 7 6 5 4 3 2 1 0 0 4 8 12 16 20 24 28 Input Voltage: VIN (V) Input Voltage : VIN (V) Ta=-40 Ta=25 Ta=85 10 9 8 7 6 5 4 3 2 1 0 -40 -20 0 20 40 60 80 100
XC6216B/C/D 202 10 9 Supply Current: IS:SISS (uA) Supply Current (A) 8 7 6 5 4 3 2 1 0 -40 -20 0 20 40 60 80 Ambient Temprature: Ta ()
XC6216B/D 332
VIN=5.3V
VIN=4.0V
Ta=-40 Ta=25 Ta=85 24 28
100
Ambient Temprature: Ta ()
26/41
XC6216/XE6216
Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(4) Supply Current vs. Input Voltage (Continued)
XC6216B/D 502 10 9 Supply Current: :ISISS (uA) Supply Current S (A) 8 7 6 5 4 3 2 1 0 28 -40 -20 0 20 40 60 80 100 Ambient Temperature: Ta ( )
VIN=7.0V
XC6216B/D 502 10 9 Supply Current : ISS (uA) Supply Current: ISS (A) 8 7 6 5 4 3 2 1 0 0 4 8 12 16 Ta=-40 Ta=25 Ta=85 20 24
Input Voltage : VIN (V) Input Voltage: VIN (V)
XC6216B/D C02 10 9 8 Supply Current :ISS (A) Current: ISS (uA) 7 6 5 4 3 2 1 0 0 4 8 12 16 20 24 28 Input Voltage : VIN (V) Input Voltage: (V) Ta=-40 Ta=25 Ta=85 Supply Current::ISS (A) Current ISS (uA) 10 9 8 7 6 5 4 3 2 1 0 -40 -20 0
XC6216B/D C02
VIN=14.0V
20
40
60
80
100
Ambient Temprature: Ta ( )
(5) Output Voltage vs. Ambient Temperature
XC621B/C/D 202 2.20 2.15 Output Voltage: VOUT (V) (V) Output Voltage : VOUT Voltage: VOUT (V) Output Voltage : VOUT (V) 2.10 2.05 2.00 1.95 1.90 1.85 1.80 -50 -25 0 25 50 75 Ambient Temperature: Ta ( 100 IOUT=1mA IOUT=10mA IOUT=20mA
CIN=CL=1.0F (ceramic)
XC6216B/D 332 3.50 3.45 3.40 3.35 3.30 3.25 3.20 3.15 3.10 -50 -25 0 25 50 75 Ambient Temperature: Ta ( ) 100 IOUT=1mA IOUT=10mA IOUT=20mA
CIN=CL=1.0F (ceramic)
27/41
XC6216/XE6216 Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(5) Output Voltage vs. Ambient Temperature
XC6216B/D 502 5.20 5.15 Output Voltage :VOUT (V) Voltage: VOUT (V) 5.10 5.05 5.00 4.95 4.90 4.85 4.80 -50 -25 0 25 50 75 Ambient Temperature: Ta () 100 IOUT=1mA IOUT=10mA IOUT=20mA Output Voltage :VOUT (V) Voltage: VOUT (V)
CIN=CL=1.0F (ceramic)
XC6216B/D C02 12.20 12.15 12.10 12.05 12.00 11.95 11.90 11.85 11.80 -50 -25 0 25 50 75 Ambient Temperature: Ta ( 100 IOUT=1mA IOUT=10mA IOUT=20mA
CIN=CL=1.0F (ceramic)
(6) Line Transient Response
XC6216B/C/D 202
IOUT=1mA, tr=tf =5s
XC6216B/C/D 202 2.4 2.3 Voltage VOUT (V) Output Voltage: :VOUT (V) 6.0 5.0 Voltage VIN Input Voltage: :V IN (V) 4.0 3.0 Output Voltage 2.0 1.0 0.0 Time (1ms/div)
XC6216B/D 332
IOUT=30mA, tr=tf =5s
6.0 5.0 Input Voltage: V VIN (V) Input Voltage : IN (V) 4.0 3.0
CL=1F (ceramic), Ta=25
IOUT=30mA, tr=tf =5s CL=1F (ceramic), Ta=25
2.4 2.3
Input Voltage
2.2 2.1
Input Voltage
2.2 2.1 2.0 1.9 1.8
Output Voltage 2.0 1.0 0.0 Time (1ms/div)
XC6216B/D 332
IOUT=1mA, tr=tf =5s
2.0 1.9 1.8
7.0 6.0 Input Voltage VIN (V) Input Voltage::V IN (V)
CL=1F (ceramic), Ta=25
3.7 3.6 Output Voltage : VOUT (V) Output Voltage: VOUT (V) 3.5 3.4 3.3 3.2 3.1 Input Voltage: V VIN(V) Input Voltage : IN (V)
7.0 6.0
CL=1F (ceramic), Ta=25
3.7 3.6
Input Voltage 5.0 4.0 3.0 2.0 1.0 Time (1ms/div)
Input Voltage 5.0 4.0 3.0 2.0 1.0 Time (1ms/div) 3.5 3.4 3.3 3.2 3.1
Output Voltage
Output Voltage
28/41
Output Voltage::VOUT (V) Voltage VOUT (V)
Output Voltage : VOUT(V) Output Voltage: VOUT (V)
XC6216/XE6216
Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(6) Line Transient Response (Continued)
XC6216B/D 502
IOUT=1mA, tr=tf =5s
XC6216B/D 502
IOUT=30mA, tr=tf =5s
9.0 8.0 Input Voltage :V IN (V) Voltage: VIN
CL=1F (ceramic), Ta=25
5.4 5.3 Output Voltage: VOUT (V) Output Voltage : VOUT (V) Input Voltage : VIN (V) Input Voltage: V IN (V)
9.0 8.0
CL=1F (ceramic), Ta=25
5.4 5.3
Input Voltage 7.0 6.0 5.0 4.0 3.0 Time (1ms/div) 5.2 5.1 5.0 4.9 4.8
Input Voltage 7.0 6.0 5.0 4.0 3.0 Time (1ms/div) 5.2 5.1 5.0 4.9 4.8
Output Voltage
Output Voltage
XC6216B/D C02
IOUT=1mA, tr=tf =5s
XC6216B/D C02
IOUT=30mA, tr=tf =5s
16.0 15.0 Input Voltage : V IN (V) Input Voltage: VIN (V)
CL=1F (ceramic), Ta=25
12.4 12.3 Output Voltage: VOUT (V) Output Voltage : VOUT (V) Voltage VIN Input Voltage: :V IN (V)
16.0 15.0
CL=1F (ceramic), Ta=25
12.4 12.3
Input Voltage 14.0 13.0 12.0 11.0 10.0 Time (1ms/div) 12.2 12.1 12.0 11.9 11.8
Input Voltage 14.0 13.0 12.0 11.0 10.0 Time (1ms/div) 12.2 12.1 12.0 11.9 11.8
Output Voltage
Output Voltage
(7) Load Transient Response
XC6216B/C/D 202
VIN=4.0V, tr=tf=5us CIN=CL=1.0uF(ceramic), Ta=25
XC6216B/D 332
VIN=5.3V, tr=tf=5us CIN=CL=1.0uF(ceramic), Ta=25
5
150
5
150
Output Current : IOUT (mA)
Output Voltage : VOUT (V)
Output Voltage 3 90
Output Voltage 3 90
2
30
60 Output Current 30
2
30m
60 Output Current 30
1
1m
1
1m
0 Time (1ms/div)
0
0 Time (1ms/div)
0
29/41
Output Current : IOUT (mA)
Output Vltage : VOUT (V)
4
120
4
120
Output Voltage: VOUT (V) Output Voltage : VOUT(V)
Output Voltage: VOUT (V) Output Voltage : VOUT (V)
XC6216/XE6216 Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(7) Load Transient Response (Continued)
XC6216B/D 502
VIN=7.0V, tr=tf=5us CIN=CL=1.0uF(ceramic), Ta=25
XC6216B/D C02
VIN=14.0V, tr=tf=5us CIN=CL=1.0uF(ceramic), Ta=25
7
150
14
150
Output Current : IOUT (mA)
Output Voltage 5 90
Output Voltage 12 90
4
30m
60 Output Current 30
1m
11
30
60 Output Current 30
3
10
1m
2 Time (1ms/div)
0
9
0 Time (1ms/div)
(8) Input Rise Time
XC6216B/C/D 202
VIN=4.0V, tr=5s IOUT=1mA, CL=1F (ceramic),Ta=25
XC6216B/C/D 202
VIN=4.0V, tr=5s IOUT=30mA, CL=1F (ceramic),Ta=25
6 4 Input Voltage: VVIN(V) Input Voltage : IN (V) 2 0
6 5 4 3
6 4 Input Voltage : V IN (V) Input Voltage: VIN (V) 2 0 -2 -4 -6
6 5 4 3 2 1 0
Input Voltage Output Voltage :V OUT (V) Output Voltage: VOUT (V)
Input Voltage Output Voltage : OUT (V) Output Voltage: V VOUT (V)
Output Voltage : VOUT (V)
Output Voltage -2 -4 -6 Time(1ms/div)
XC6216B/D 332
VIN=4.0V, tr=5s IOUT=1mA, CL=1F (ceramic),Ta=25
Output Voltage
2 1 0
Time (1ms/div)
XC6216B/D 332
VIN=4.0V, tr=5s IOUT=30mA, CL=1uF (ceramic),Ta=25
8 6 Input Voltage : VIN (V) 4 2 0 -2 -4 -6 -8
8 7 Input Voltage : VIN (V) 6 5 Output Voltage : VOUT (V)
8 6 4 2 0 -2 -4 -6 -8
8 7 6 5
Input Voltage
Input Voltage
Output Voltage
4 3 2 1 0
Output Voltage
4 3 2 1 0
Time (1ms/div)
Time(1ms/div)
30/41
Output Current : IOUT (mA)
Output Voltage : VOUT (V)
Output Voltage : VOUT (V)
6
120
13
120
XC6216/XE6216
Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(8) Input Rise Time (Continued)
XC6216B/D 502
VIN=4.0V, tr=5s
XC6216B/D 502
VIN=4.0V, tr=5s
8 6 Input Voltage : VIN (V) Input Voltage: V IN (V) 4 2 0 -2 -4 -6 -8
IOUT=1mA, CL=1F (ceramic),Ta=25
8 7 Output Voltage: V OUT Output Voltage : VOUT (V) 6 5 Input Voltage : VININ (V) Input Voltage: V (V)
8 6 4 2 0 -2 -4 -6 -8
IOUT=30mA, CL=1F (ceramic),Ta=25
8 7 6 5 Output Voltage : VOUT (V) Output Voltage: V OUT (V)
Input Voltage
Input Voltage
Output Voltage
4 3 2 1 0
Output Voltage
4 3 2 1 0
Time (1ms/div)
Time (1ms/div)
XC6216B/D C02
VIN=4.0V, tr=5s
XC6216B/D C02
VIN=4.0V, tr=5s
15 10 Voltage: VIN Input Voltage : V IN (V) 5
IOUT=1mA, CL=1F (ceramic),Ta=25
18 15 Output Voltage : V OUT (V) Output Voltage: VOUT (V) Input Voltage: V IN (V) Input Voltage : VIN (V) 12
15 10 5 0 -5 -10 -15
IOUT=30mA, CL=1F (ceramic),Ta=25
18 15 12 Output Voltage : VOUT (V) Output Voltage: V OUT (V)
Input Voltage
Input Voltage
Output Voltage 0 -5 -10 -15 Time (1ms/div) 9 6 3 0
Output Voltage
9 6 3 0
Time (1ms/div)
(9) CE Rise Time
6 4 CE Input Voltage : V CE (V) CE Input Voltage: VCE (V) 2 0
XC6216B/C/D 202
VIN=4.0V, tr=5s IOUT=1mA, CL=1F (ceramic),Ta=25
XC6216B/C/D 202
VIN=4.0V, tr=5s
6 5 Output Voltage : VOUT (V) Output Voltage: V OUT (V) 4 3 CE Input Voltage : VCE (V) CE Input Voltage: V CE (V)
6 4 2 0
IOUT=30mA, CL=1F (ceramic),Ta=25
6 5 4 3
CE Input Voltage
CE Input Voltage Output Voltage: V OUT (V) Output Voltage : VOUT (V)
Output Voltage -2 -4 -6 Time (1ms/div) 2 1 0
Output Voltage -2 -4 -6 Time(1ms/div) 2 1 0
31/41
XC6216/XE6216 Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(9) CE Rise Time (Continued)
XC6216B/D 332
VIN=5.3V, tr=5s
XC6216B/D 332
VIN=5.3V, tr=5s
8 6 CE Input Voltage : CE (V) CE Input Voltage: V VIN(V) 4 2 0 -2 -4 -6 -8
IOUT=1mA, CL=1F (ceramic),Ta=25
8 7 Output Voltage : V OUT (V) Output Voltage: VOUT (V) 6 5 CE Input Voltage : VCE (V) CE Input Voltage: V CE
8 6 4 2 0 -2 -4 -6 -8
IOUT=30mA, CL=1F (ceramic),Ta=25
8 7 6 5 4 Output Voltage: V OUT (V) Output Voltage : VOUT (V)
CE Input Voltage
CE Input Voltage
Output Voltage
4 3 2 1 0
Output Voltage
3 2 1 0
Time (1ms/div)
XC6216B/D 502
VIN=7.0V, tr=5s
Time (1ms/div)
XC6216B/D 502
VIN=7.0V, tr=5s
8 6 CE Input Voltage: V CE (V) CE Input Voltage : VCE (V) 4 2 0 -2 -4 -6 -8
IOUT=1mA, CL=1F (ceramic),Ta=25
8 7 Output Voltage VOUT (V) Output Voltage: :V OUT (V) CE Input Voltage :V CE (V) Voltage: VCE (V) 6 5
8 6 4 2 0 -2 -4 -6 -8
IOUT=30mA, CL=1F (ceramic),Ta=25
8 7 6 5 Output Voltage : VOUT (V) Output Voltage: V OUT (V)
CE Input Voltage
CE Input Voltage
Output Voltage
4 3 2 1 0
Output Voltage
4 3 2 1 0
Time (1ms/div)
XC6216B/D C02
VIN=14.0V, tr=5s
Time (1ms/div)
XC6216B/D C02
VIN=14.0V, tr=5s
15 10 CE Input Voltage : VCE (V) CE Input Voltage: V CE (V) 5 0 -5 -10 -15
IOUT=1mA, CL=1F (ceramic),Ta=25
18 15 12
15 10 5 0 -5 -10 -15
IOUT=30mA, CL=1F (ceramic),Ta=25
18 15 12 9 6 3 0
CE Input Voltage Output Voltage : VOUT (V) Output Voltage: V OUT (V) CE Input Voltage : VCE (V) CE Input Voltage: V CE (V)
CE Input Voltage Output Voltage : VOUt (V) Output Voltage: V OUT (V)
Output Voltage
9 6 3 0
Output Voltage
Time (1ms/div)
Time (1ms/div)
32/41
XC6216/XE6216
Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(10) Ripple Rejection Rate
XC6216B/C/D 202
VIN=4.0Vdc+0.5Vp-p, IOUT=1mA
XC6216B/C/D 202
VIN=4.0Vdc+0.5Vp-p, IOUT=30mA
90 Ripple Rejection Rate: PSRR (dB Ripple Rejection Rate: PSRR (dB) 80 70 60 50 40 30 20 10 0 0.01 0.1 1
CL=1F (ceramic),Ta=25
90 PSRR (dB) Ripple Rejection Rate: PSRR (dB) 80 70 60 50 40 30 20 10 0 0.01 0.1 1
CL=1F (ceramic),Ta=25
10
100
10
100
Ripple Frequency:(kHz) Frequency : f f (kHz)
XC6216B/D 332
VIN=5.3Vdc+0.5Vp-p, IOUT=1mA
Ripple Frequency:(kHz) Frequency : f f (kHz)
XC6216B/D 332
VIN=4.0Vdc+0.5Vp-p, IOUT=30mA
90 Ripple Rejection(dB) PSRR (dB) PSRR Rate: 80 70 60 50 40 30 20 10 0 0.01
CL=1F (ceramic),Ta=25
90 Ripple Rejection Rate: PSRR (dB) PSRR (dB) 80 70 60 50 40 30 20 10 0 0.01
CL=1F (ceramic),Ta=25
0.1
1
10
100
0.1
1
10
100
Frequency : f (kHz) Ripple Frequency: f (kHz)
Ripple Frequency: f (kHz) Frequency : f (kHz)
XC6216B/D 502
VIN=7.0Vdc+0.5Vp-p, IOUT=1mA
XC6216B/D 502
VIN=7.0Vdc+0.5Vp-p, IOUT=30mA
90 Ripple Rejection Rate: PSRR (dB) PSRR (dB) 80
CL=1F (ceramic),Ta=25
90 80 Ripple Rejection Rate: PSRR (dB) PSRR (dB) 70 60 50 40 30 20 10 0 0.01
CL=1F (ceramic),Ta=25
70 60 50 40 30 20 10 0 0.01
0.1
1 Ripple Frequency: f (kHz) Frequency : f (kHz)
10
100
0.1
1
10
100
Ripple Frequency: f (kHz) Frequency : f (kHz)
33/41
XC6216/XE6216 Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(10) Ripple Rejection Time (Continued)
XC6216B/D C02
VIN=VCE=14.0Vdc+0.5Vp-p, IOUT=1mA
XC6216B/D C02
VIN=VCE=14.0Vdc+0.5Vp-p, IOUT=30mA
90 Ripple Rejection Rate: PSRR (dB) PSRR (dB) 80 70 60 50 40 30 20 10 0 0.01
CL=1F (ceramic),Topr=25
90 Ripple Rejection (dB) PSRR (dB) PSRR Rate: 80 70 60 50 40 30 20 10 0 0.01
CL=1F (ceramic),Topr=25
0.1
1
10
100
0.1
1
10
100
Ripple Frequency: f (kHz) Frequeency : f (kHz)
Ripple Frequency: f (kHz) Frequency : f (kHz)
34/41
XC6216/XE6216
Series
PACKAGING INFORMATION
SOT-25 SOT-89-5
(0.4)
0.8MIN
+0.2 -0.1
2.80.2
1.6
2.50.1
4.5MAX
0.2MIN
1.10.1
1.3MAX
(0.1)
0.8MIN
USP-6C
USP-6C Reference Pattern Layout
USP-6C Reference Metal Mask Design
Note: The side of pins are not gilded, but nickel is used.
1.50.1
5
5
35/41
XC6216/XE6216 Series
PACKAGING INFORMATION (Continued)
SOT-223 SOT-89
TO-252
1.10.25 6.10.15 0.850.25 9.90.55
36/41
2.4 MAX
4.32 MAX
XC6216/XE6216
Series
PACKAGING INFORMATION (Continued)
SOT-25 Power Dissipation Power dissipation data for the SOT-25 is shown in this page. The value of power dissipation varies with the mount board conditions. Please use this data as one of reference data taken in the described condition.
1.
Measurement Condition (Reference data) Condition: Ambient: Soldering: Board: Mount on a board Natural convection Lead (Pb) free Dimensions 40 x 40 mm (1600 mm in one side) Copper (Cu) traces occupy 50% of the board area In top and back faces Package heat-sink is tied to the copper traces (Board of SOT-26 is used.) Material: Thickness: Through-hole: Glass Epoxy (FR-4) 1.6 mm 4 x 0.8 Diameter
2
mm Evaluation Board (Unit: mm)
2. Power Dissipation vs. Operating temperature Board Mount (Tj max = 125 )
Ambient Temperature 25 85
Power Dissipation PdmW 600 240
Thermal Resistance (/W) 166.67
Pd-Ta Pd vs. Ta 700 600 500 400 300 200 100 0 25 45 65 85 Ambient Temperature Ta ( Ta 105
) Power Dissipation Pd (mW)
PdmW
125
37/41
XC6216/XE6216 Series
PACKAGING INFORMATION (Continued)
SOT-89-5 Power Dissipation Power dissipation data for the SOT-89-5 is shown in this page. The value of power dissipation varies with the mount board conditions. Please use this data as one of reference data taken in the described condition.
1.
Measurement Condition (Reference data) Condition: Ambient: Soldering: Board: Mount on a board Natural convection Lead (Pb) free Dimensions 40 x 40 mm (1600 mm in one side) Copper (Cu) traces occupy 50% of the board area In top and back faces Package heat-sink is tied to the copper traces Material: Thickness: Through-hole: Glass Epoxy (FR-4) 1.6 mm 5 x 0.8 Diameter
2
2.
Power Dissipation vs. Operating temperature Board Mount (Tj max = 125 )
Evaluation Board (Unit: mm)
Ambient Temperature 25 85
Power Dissipation PdmW 1300 520
Thermal Resistance (/W) 76.92
Pd-Ta Pd vs. Ta
Power Dissipation Pd (mW)
1400 1200 1000 800 600 400 200 0 25 45 65 85 Ambient Temperature Ta ( ) Ta 105 125
38/41
PdmW
XC6216/XE6216
Series
PACKAGING INFORMATION (Continued)
USP-6C Power Dissipation Power dissipation data for the USP-6C is shown in this page. The value of power dissipation varies with the mount board conditions. Please use this data as one of reference data taken in the described condition.
1.
Measurement Condition (Reference data) Condition: Ambient: Soldering: Board: Mount on a board Natural convection Lead (Pb) free Dimensions 40 x 40 mm (1600 mm in one side) Copper (Cu) traces occupy 50% of the board area In top and back faces Package heat-sink is tied to the copper traces Material: Thickness: Through-hole: Glass Epoxy (FR-4) 1.6 mm 4 x 0.8 Diameter
2
2.
Power Dissipation vs. Operating temperature Board Mount (Tj max = 125 )
Evaluation Board (Unit: mm)
Ambient Temperature 25 85
Power Dissipation PdmW 1000 400
Thermal Resistance (/W) 100.00
Pd-Ta Pd vs. Ta
Power Dissipation Pd (mW)
1200 1000 800 600 400 200 0 25 45 65 85 Ambient Temperature Ta ( ) Ta 105 125
PdmW
39/41
XC6216/XE6216 Series
PACKAGING INFORMATION (Continued)
SOT-223 Power Dissipation Power dissipation data for the SOT-223 is shown in this page. The value of power dissipation varies with the mount board conditions. Please use this data as one of reference data taken in the described condition.
1.
Measurement Condition (Reference data) Condition: Ambient: Soldering: Board: Mount on a board Natural convection Lead (Pb) free Dimensions 40 x 40 mm (1600 mm in one side) Copper (Cu) traces occupy 50% of the board area In top and back faces Package heat-sink is tied to the copper traces Material: Thickness: Through-hole: Glass Epoxy (FR-4) 1.6 mm 4 x 0.8 Diameter
2
2.
Power Dissipation vs. Operating temperature Board Mount (Tj max = 125 )
Evaluation Board (Unit: mm)
Ambient Temperature 25 85
Power Dissipation PdmW 1500 600
Thermal Resistance (/W) 66.67
Pd-Ta Pd vs. Ta
Power Dissipation Pd (mW)
1600 1400 1200 1000 800 600 400 200 0 25 45 65 85 Ta ) Ambient Temperature Ta ( 105 125
40/41
PdmW
XC6216/XE6216
Series
1. The products and product specifications contained herein are subject to change without notice to improve performance characteristics. Consult us, or our representatives before use, to confirm that the information in this datasheet is up to date. 2. We assume no responsibility for any infringement of patents, patent rights, or other rights arising from the use of any information and circuitry in this datasheet. 3. Please ensure suitable shipping controls (including fail-safe designs and aging protection) are in force for equipment employing products listed in this datasheet. 4. The products in this datasheet are not developed, designed, or approved for use with such equipment whose failure of malfunction can be reasonably expected to directly endanger the life of, or cause significant injury to, the user. (e.g. Atomic energy; aerospace; transport; combustion and associated safety equipment thereof.) 5. Please use the products listed in this datasheet within the specified ranges. Should you wish to use the products under conditions exceeding the specifications, please consult us or our representatives. 6. We assume no responsibility for damage or loss due to abnormal use. 7. All rights reserved. No part of this datasheet may be copied or reproduced without the prior permission of TOREX SEMICONDUCTOR LTD.
41/41

▲Up To Search▲

Price & Availability of XC6216B992ML

	To Download XC6216B992ML Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .