View PTK10-Q24-D12_4241771.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

rev. page date 1 of 3
08/2007
PART NUMBER: PTK10 series
DESCRIPTION: DC/DC converter
features *industry standard pin out *wide 4:1 input range *fully isolated *over-current protection *over-voltage protection *six-sided EMI shielding *constant switching frequency *high efficiency *compact size 2.0"x1.0"x0.4" *3 year warranty
model 1 number
output power (max)
input voltage
output voltage
output current (max)
ripple & noise 2 mV P-P
efficiency (typ.)
PTK10-Q24-S3 PTK10-Q24-S5 PTK10-Q24-S12 PTK10-Q24-S15 PTK10-Q24-D5 PTK10-Q24-D5A PTK10-Q24-D12 PTK10-Q24-D15 PTK10-Q48-S3 PTK10-Q48-S5 PTK10-Q48-S12 PTK10-Q48-S15 PTK10-Q48-D5 PTK10-Q48-D5A PTK10-Q48-D12 PTK10-Q48-D15
7.92W 10.0W 10.8W 10.5W 10.0W 10.0W 10.8W 10.5W 7.92W 10.0W 10.8W 10.5W 10.0W 10.0W 10.8W 10.5W
10-36VDC 10-36VDC 10-36VDC 10-36VDC 10-36VDC 10-36VDC 10-36VDC 10-36VDC 20-72VDC 20-72VDC 20-72VDC 20-72VDC 20-72VDC 20-72VDC 20-72VDC 20-72VDC
3.3VDC 5VDC 12VDC 15VDC 5VDC 5VDC 12VDC 15VDC 3.3VDC 5VDC 12VDC 15VDC 5VDC 5VDC 12VDC 15VDC
2.4A 2.0A 0.9A 0.7A 1.0A/1.0A 1.5A/0.5A 0.45A 0.35A 2.4A 2.0A 0.9A 0.7A 1.0A/1.0A 1.5A/0.5A 0.45A 0.35A
75 75 120 150 100/100 100/100 120/120 150/150 75 75 120 150 100/100 100/100 120/120 150/150
79% 82% 83% 84% 80% 78% 83% 83% 78% 81% 84% 85% 81% 81% 83% 83%
NOTE: 1. All models are also available in an extended temperature range of -40C~85C. For these models, append "M" to the model number, e.g. PTK10-Q48-S5M. 2. Ripple & noise measured with a 20MHz bandwidth, off a 10uF electrolytic and a 0.1uF ceramic cap in parallel at the ouptut.
DERATING CURVES
20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2382
rev. page date 2 of 3
08/2007
PART NUMBER: PTK10 series
DESCRIPTION: DC/DC converter
INPUT
parameter input voltage range switching frequency conditions/description min 10 20 nom 24 48 300 max 36 72 units VDC VDC KHz
constant
OUTPUT
conditions/description single output dual output line regulation single output models (low line to high line) dual output models load regulation single output models - no load to full load dual output models - balanced loads (10% min. load) minimum load converters will not be damaged if loading conditions are less but regulation specs may not be met3 ripple and noise see chart NOTE: 3 single output: no min. load required, dual: 10% parameter set point accuracy min nom max units -2% +2% -3% +3% -0.5% +0.5% -1.0% +1.0% -1.0% +1.0% -2.5% +2.5% than minimum specified loads,
PROTECTION
parameter conditions/description min nom max 135% 140% units over-current continuous auto recovery 4 105% over-voltage internally zener clamped 4 110% NOTE: 4 continuous operation in a protected state may compromise long-term reliability.
GENERAL
parameter efficiency dielectric withstand insulation resistance agency standards case material material flammability weight conditions/description min nom max units typical at full load 77% 83% input/case, input/output, output/case 500 VAC at 500 VDC 100M Ohms approved to UL60950(E222889), CSA C22.2 No. 60950, TUV EN60950; (single output only) Zn 94 V-0 40 grams (1.41) (ounces) MTBF MIL-HDBK-217F 580k hours operating temperature regular models - see derating curve. -20 +71 C extended temperature models -40 +85 C storage temperature -40 +105 C humidity operating (non-condensing) 5% 95% RH washability not intended for aqueous wash
20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2382
rev. page date 3 of 3
08/2007
PART NUMBER: PTK10 series
DESCRIPTION: DC/DC converter
DIMENSIONS (mm)
20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2382

▲Up To Search▲

Price & Availability of PTK10-Q24-D12

	To Download PTK10-Q24-D12 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .