 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 50RIA Series Vishay High Power Products Medium Power Thyristors (Stud Version), 50 A FEATURES * High current rating * Excellent dynamic characteristics * dV/dt = 1000 V/s option * Superior surge capabilities * Standard package * Metric threads version available TO-208AC (TO-65) RoHS COMPLIANT * Types up to 1200 V VDRM/VRRM * RoHS compliant TYPICAL APPLICATIONS * Phase control applications in converters PRODUCT SUMMARY IT(AV) 50 A * Lighting circuits * Battery charges * Regulated power supplies and temperature and speed control circuit * Can be supplied to meet stringent military, aerospace and other high reliability requirements MAJOR RATINGS AND CHARACTERISTICS PARAMETER IT(AV) IT(RMS) 50 Hz ITSM 60 Hz 50 Hz 60 Hz VDRM/VRRM tq TJ Typical TEST CONDITIONS VALUES 50 TC 94 80 1430 A 1490 10.18 9.30 100 to 1200 110 - 40 to 125 V s C kA2s UNITS A C A I2 t Document Number: 93711 Revision: 19-Sep-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 1 50RIA Series Vishay High Power Products Medium Power Thyristors (Stud Version), 50 A ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VOLTAGE CODE 10 20 40 50RIA 60 80 100 120 VDRM/VRRM, MAXIMUM REPETITIVE PEAK AND OFF-STATE VOLTAGE (1) V 100 200 400 600 800 1000 1200 VRSM, MAXIMUM NON-REPETITIVE PEAK VOLTAGE (2) V 150 300 500 700 900 1100 1300 15 IDRM/IRRM MAXIMUM AT TJ = TJ MAXIMUM mA Notes (1) Units may be broken over non-repetitively in the off-state direction without damage, if dI/dt does not exceed 20 A/s (2) For voltage pulses with t 5 ms p ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average on-state current at case temperature Maximum RMS on-state current SYMBOL IT(AV) IT(RMS) t = 10 ms Maximum peak, one-cycle non-repetitive surge current ITSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2 t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2t for fusing Low level value of threshold voltage High level value of threshold voltage Low level value of on-state slope resistance High level value of on-state slope resistance Maximum on-state voltage Maximum holding current Latching current I2t VT(TO)1 VT(TO)2 rt1 rt2 VTM IH IL No voltage reapplied 100 % VRRM reapplied No voltage reapplied 100 % VRRM reapplied TEST CONDITIONS 180 sinusoidal conduction VALUES 50 94 80 1430 1490 1200 Sinusoidal half wave, initial TJ = TJ maximum 1255 10.18 9.30 7.20 6.56 101.8 0.94 1.08 4.08 m ( x IT(AV) < I < 20 x x IT(AV)), TJ = TJ maximum Ipk = 157 A, TJ = 25 C TJ = 25 C, anode supply 22 V, resistive load, initial IT = 2 A Anode supply 6 V, resistive load 3.34 1.60 200 400 V mA kA2s V kA2s A UNITS A C A t = 0.1 to 10 ms, no voltage reapplied, TJ = TJ maximum (16.7 % x x IT(AV) < I < x IT(AV)), TJ = TJ maximum ( x IT(AV) < I < 20 x x IT(AV)), TJ = TJ maximum (16.7 % x x IT(AV) < I < x IT(AV)), TJ = TJ maximum www.vishay.com 2 For technical questions, contact: ind-modules@vishay.com Document Number: 93711 Revision: 19-Sep-08 50RIA Series Medium Power Thyristors Vishay High Power Products (Stud Version), 50 A SWITCHING PARAMETER Maximum rate of rise of turned-on current Typical delay time Typical turn-off time VDRM 600 V VDRM 1600 V dI/dt SYMBOL TEST CONDITIONS TC = 125 C, VDM = Rated VDRM, Gate pulse = 20 V, 15 , tp = 6 s, tr = 0.1 s maximum ITM = (2 x rated dI/dt) A TC = 25 C, VDM = Rated VDRM, ITM = 10 A dc resistive circuit Gate pulse = 10 V, 15 source, tp = 20 s TC = 125 C, ITM = 50 A, reapplied dV/dt = 20 V/s dIr/dt = - 10 A/s, VR = 50 V VALUES 200 A/s 100 0.9 s 110 UNITS td tq BLOCKING PARAMETER Maximum critical rate of rise of off-state voltage SYMBOL dV/dt TEST CONDITIONS TJ = TJ maximum linear to 100 % rated VDRM TJ = TJ maximum linear to 67 % rated VDRM VALUES 200 500 (1) V/s UNITS Note (1) Available with dV/dt = 1000 V/s, to complete code add S90 i.e. 50RIA120S90 TRIGGERING PARAMETER Maximum peak gate power Maximum average gate power Maximum peak positive gate current Maximum peak positive gate voltage Maximum peak negative gate voltage SYMBOL PGM PG(AV) IGM +VGM -VGM TJ = - 40 C DC gate current required to trigger IGT TJ = 25 C TJ = 125 C DC gate voltage required to trigger DC gate current not to trigger VGT IGD VGD TJ = - 40 C TJ = 25 C TJ = TJ maximum, VDRM = Rated voltage TJ = TJ maximum Maximum gate current/voltage not to trigger is the maximum value which will not trigger any unit with rated VDRM anode to cathode applied Maximum required gate trigger current/voltage are the lowest value which will trigger all units 6 V anode to cathode applied TEST CONDITIONS TJ = TJ maximum, tp 5 ms VALUES 10 W 2.5 2.5 20 V 10 250 100 50 3.5 V 2.5 5.0 mA mA A UNITS DC gate voltage not to trigger 0.2 V Document Number: 93711 Revision: 19-Sep-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 3 50RIA Series Vishay High Power Products Medium Power Thyristors (Stud Version), 50 A THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Maximum operating junction and storage temperature range Maximum thermal resistance, junction to case Maximum thermal resistance, case to heatsink SYMBOL TJ, TStg RthJC RthCS DC operation Mounting surface, smooth, flat and greased Non-lubricated threads Allowable mounting torque Lubricated threads Approximate weight Case style See dimensions - link at the end of datasheet TEST CONDITIONS VALUES - 40 to 125 0.35 K/W 0.25 3.4 + 0 - 10 % (30) 2.3 + 0 - 10 % (20) 28 1.0 UNITS C N*m (lbf * in) g oz. TO-208AC (TO-65) RthJC CONDUCTION CONDUCTION ANGLE 180 120 90 60 30 SINUSOIDAL CONDUCTION 0.078 0.094 0.120 0.176 0.294 RECTANGULAR CONDUCTION 0.057 0.098 0.130 0.183 0.296 TJ = TJ maximum K/W TEST CONDITIONS UNITS Note * The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC Maximum Allowable Case Temperature (C) 50RIA Series RthJC (DC) = 0.35 K/W Maximum Allowable Case Temperature (C) 130 130 50RIA Series RthJC (DC) = 0.35 K/W 120 120 Conduction Angle 110 Conduction Period 110 30 100 60 90 120 180 90 0 10 20 30 40 50 60 Average On-state Current (A) 100 90 60 30 80 0 10 20 30 90 120 180 40 50 60 DC 70 80 Average On-state Current (A) Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics www.vishay.com 4 For technical questions, contact: ind-modules@vishay.com Document Number: 93711 Revision: 19-Sep-08 50RIA Series Medium Power Thyristors Vishay High Power Products (Stud Version), 50 A Maximum Average On-state Power Loss (W) 80 70 60 50 40 30 Conduction Angle Peak Half Sine Wave On-state Current (A) 180 120 90 60 30 RMS Limit 1300 1200 1100 1000 900 800 700 600 1 At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Initial TJ = 125C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 20 10 0 0 10 20 50RIA Series T = 125C J 50RIA Series 30 40 50 10 100 Average On-state Current (A) Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 3 - On-State Power Loss Characteristics Fig. 5 - Maximum Non-Repetitive Surge Current Maximum Average On-state Power Loss (W) 100 90 80 70 60 50 RMS Limit 40 30 20 10 0 0 10 20 30 40 50 60 70 80 Average On-state Current (A) Conduction Period 1500 Peak Half Sine Wave On-state Current (A) DC 180 120 90 60 30 1400 1300 1200 1100 1000 900 800 700 600 500 0.01 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial TJ = 125C No Voltage Reapplied Rated V RRM Reapplied 50RIA Series T = 125C J 50RIA Series 0.1 Pulse Train Duration (s) 1 Fig. 4 - On-State Power Loss Characteristics Fig. 6 - Maximum Non-Repetitive Surge Current 1000 Instantaneous On-state Current (A) 100 T = 25C J 10 T = 125C J 50RIA Series 1 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Instantaneous On-state Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics Document Number: 93711 Revision: 19-Sep-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 5 50RIA Series Vishay High Power Products Medium Power Thyristors (Stud Version), 50 A Transient Thermal Impedance ZthJ-hs (K/W) 1 Steady State Value RthJ-hs = 0.35 K/W 0.1 50RIA Series 0.01 0.001 0.01 0.1 Square Wave Pulse Duration (s) 1 10 Fig. 8 - Thermal Impedance ZthJC Characteristics 100 Rectangular gate pulse a) Recommended load line for rated di/dt : 20V, 30 ohms; tr<=0.5 s b) Recommended load line for <=30% rated di/dt : 20V, 65 ohms tr<=1 s 10 (b) (a) Tj=-40 C Tj=25 C Instantaneous Gate Voltage (V) (1) PGM = 10W, tp = 5ms (2) PGM = 20W, tp = 2.5ms (3) PGM = 50W, tp = 1ms (4) PGM = 100W, tp = 500s Tj=125 C 1 (1) (2) (3) (4) VGD IGD 0.1 0.001 0.01 50RIA Series 0.1 1 Frequency Limited by PG(AV) 10 100 1000 Instantaneous Gate Current (A) Fig. 9 - Gate Characteristics ORDERING INFORMATION TABLE Device code 50 1 1 2 3 4 RIA 2 - 120 3 S90 4 M 5 Current code Essential part number Voltage code x 10 = VRRM (see Voltage Ratings table) Critical dV/dt: None = 500 V/s (standard value) S90 = 1000 V/s (special selection) 5 - None = Stud base TO-208AC (TO-65) 1/4" 28UNF-2A M = Stud base TO-208AC (TO-65) M6 x 1 LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95334 www.vishay.com 6 For technical questions, contact: ind-modules@vishay.com Document Number: 93711 Revision: 19-Sep-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of 50RIA10
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |