 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Semiconductor SA5511 / SA5511(B) LED Lamp Features * Red Colored diffusion lens type * 5mm(T-13/4) all plastic mold type * High reliability and low power consumption Outline Dimensions unit : mm STRAIGHT TYPE 4.80~5.20 STOPPER TYPE : (B) 4.80~5.20 0.05 Typ. 8.40~8.80 1.00 Max. 0.05 Typ. 8.40~8.80 1.00 Max 1.20 Min. 0.50 Max. 1.50 Min. 26.00 Min. 1.27 Typ. 0.06 Max 1.50 Min. 26.00 Min. 2.54 Typ. 2.54 Typ. 0.55 Max. 1 2 5.50~6.00 0.55 Max. 1 2 5.60~6.00 PIN Connections 1. Anode 2. Cathode KSD-O2O003-000 1 SA5511 / SA5511(B) Absolute Maximum Ratings Characteristic Power dissipation Forward current * Peak forward current Reverse voltage Operating temperature range Storage temperature range 2 1 (Ta=25) Symbol PD IF IFP VR Topr Tstg Rating 75 30 50 4 -2585 -30100 260 for 10 seconds Unit mW mA mA V * Soldering temperature Tsol *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Keep the distance more than 2.0mm from PCB to the bottom of LED package Electrical / Optical Characteristics Characteristic Forward voltage * Luminous intensity Peak wavelength Spectrum bandwidth Reverse current * Half angle 3 4 (Ta=25) Symbol VF IV Test Condition IF= 20mA IF= 20mA IF= 20mA IF= 20mA VR=4V IF= 20mA Min 43 - Typ 2.1 630 35 20 Max 2.5 155 10 - Unit V mcd nm nm uA deg P IR 1/2 *3. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity *4. Luminous intensity maximum tolerance for each grade classification limit is 18% *4. Luminous Intensity Classification J 43 ~ 68 K 68 ~ 100 L 100 ~ 155 KSD-O2O003-000 2 SA5511 / SA5511(B) Characteristic Diagrams Fig. 1 IF - VF Fig. 2 IV - IF Forward Current IF [mA] Luminous Intensity Iv [mcd] Forward Voltage VF [V] Forward Current IF [mA] Fig. 3 IF - Ta Fig.4 Spectrum Distribution Current IF [mA] Forward Ambient Temperature Ta [] Relative Intensity [%] Wavelength [nm] Fig. 5 Radiation Diagram Relative Luminous Intensity Iv [%] KSD-O2O003-000 3 SA5511 / SA5511(B) The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-O2O003-000 4 |
Price & Availability of SA5511
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |