View M57184N-715B_4296969.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HYBRID IC
M57184N-715B
UNINSULATED DC-DC CONVERTER
DESCRIPTION
The M57184N-715B is an un-insulated type DC-DC converter designed for direct input of rectified voltage from 200V AC. This hybrid IC provides +15V, 350mA and +5V, 200mA with fewer external components such as electrolytic capacitors and choke coils only.
OUTLINE DRAWING
Dimensions: mm
52.0 max
M57184N-715B
FEATURES
*Input voltage rage *********************************** DC 220V ~ 360V *Output specifications******************************* 15V, 350mA 5V, 200mA
1
XXXX
18
24.0 max 4.0+/-1.0
0.35+/-0.2
APPLICATIONS
Best suited to power supply for home appliances such as washing machines.
4.5max
2.54
0.55+/-0.1
4.5max
7.5max 12.0max
2.54 x 17 = 43.18 4.5max
BLOCK DIAGRAM
6 Vin 1 8 Current detector 10 Vo-1
Base driver Voltage detector
COMMON 4 16 TEST 12 Current detector 18 Vo-2
Base driver Voltage detector
14 COMMON
HYBRID IC
M57184N-715B
UNINSULATED DC-DC CONVERTER
MAXIMUM RATINGS (unless otherwise noted, Ta=25C)
Symbol Vin IL-1 IL-2 Topr Tstg Parameter Input voltage Load current-1 Load current-2 Operating temperature Storage temperature No condensation allowable No condensation allowable Conditions Ratings 600 350 200 -20 ~ +70 -25 ~ +85 Unit V mA mA C C
ELECTRICAL CHARACTERISTICS (Unless otherwise noted, Ta=25C, Vin=280V)
Symbol Vin VO-1 VO-2 Reg-I1 Reg-I2 Reg-L1 Reg-L2 VP-P Parameter Input voltage Output voltage - 1 Output voltage - 2 Input regulation - 1 Input regulation - 2 Load regulation - 1 Load regulation - 2 Efficiency Ripple voltage Conditions Recommended range Pin 10 voltage: IL-1 = 350mA Pin 18 voltage: IL-2 = 200mA Pin 10 voltage: IL-1 = 350mA, Vin = 220 ~ 360V Pin 18 voltage: IL-2 = 200mA, Vin = 220 ~ 360V Pin 10 voltage: IL-1 = 0 ~ 350mA Pin 18 voltage: IL-2 = 0 ~ 200mA IL-1 = 350mA, IL-2 = 200mA IL-1 = 350mA, IL-2 = 200mA (*1) Limits Min 220 14.1 4.7 -- -- -- -- 65 -- Typ 280 15.0 5.0 60 60 80 80 72 80 Max 360 15.9 5.3 160 160 200 200 -- 200 Unit V V V mV mV mV mV % mVp-p
(*1) Spike noise is not included in output ripple voltage.
MEASUREMENT CIRCUIT
1mH
6
8
16 10 12
1000F 50V
IL-1
A
IL-2
A
1
M57184N-715B
+
V
18
RL-1 Vo-1
+ Vin +
10F 450V x2 4 14 470F 50V
+
V
RL-2 Vo-2
(*) Please use power inductors with good performance of DC superimposition. (We used C13 -FR -102: made in MITSUMI ELECTRIC CO., LTD.) (**) Please use electrolytic capacitor of output side with high frequency and low impedance.
(***)Since a 16Pin is a test terminal, please use it for opening, carrying out it electrically.
2
HYBRID IC
M57184N-715B
UNINSULATED DC-DC CONVERTER
TYPICAL CHARACTERISTICS
OUTPUT VOLTAGE - INPUT VOLTAGE CHARACTERISTICS (TYPICAL) 16 14 12 10 8 6 4 2 0 0 100 200 INPUT VOLTAGE RL-1=43 RL-2=25 16 V OUTPUT VOLTAGE Vo-1 14 12 10 8 6 4 2 0 0 100 200 300 400 500 LOAD CURRENT IL-1(mA) Vi = 280V IL-2 = 200mA OUTPUT VOLTAGE - LOAD CURRENT CHARACTERISTICS (TYPICAL)
V OUTPUT VOLTAGE Vo-1
OUTPUT VOLTAGE - LOAD CURRENT CHARACTERISTICS (TYPICAL)
6 V OUTPUT VOLTAGE Vo-2 5 INPUT CURRENT I(mA) 4 3 2 1 0 0 100 200 300 400 LOAD CURRENT IL-2(mA)
START-UP CHARACTERISTICS (TYPICAL)
140 120 100 80 60 40 20 0 0 50 100 150 200 250
INPUT VOLTAGE
RL-1 = 43 RL-2 = 25
Vi = 280V IL-1 = 200mA
START-UP CHARACTERISTICS (TYPICAL)
7 V OUTPUT VOLTAGE Vo-2 6 EFFICIENCY (%) 5 4 3 2 1 0 0 50 100 150 200 250 INPUT VOLTAGE 80 70 60 50 40 30 20 10 0 0
EFFICIENCY - LOAD CURRENT CHARACTERISTICS (TYPICAL)
RL-1 = 43 RL-2 = 25
Vi = 280V IL-2 = 200mA
50
100
150
200
250
300
350
LOAD CURRENT IL-1(mA)
EFFICIENCY - INPUT VOLTAGE CHARACTERISTICS (TYPICAL)
80
DERATING CURVE 7.0
75
OUTPUT POWER (W)
320 340 360
6.0 5.0 4.0 3.0 2.0 1.0 0.0 -30
EFFICIENCY (%)
70 65 60 55 50 220 240 260 280 300 INPUT VOLTAGE (V)
IL-1 = 350mA IL-2 = 200mA
-10 10 30 50 70 OPERATION TEMPERATURE Ta(C)
90
3
HYBRID IC
M57184N-715B
UNINSULATED DC-DC CONVERTER
FOR SAFETY USING Great detail and careful attention are given to the production activity of Hics, such as the development, the quality of production, and in it's reliability. However the reliability of Hics depends not only on their own factors but also in their condition of usage. When handling Hics, please note the following cautions. CAUTIONS
Packing
The materials used in packing Hics can only withstand normal external conditions. When exposed to outside shocks, rain and certain environmental contaminators, the packing materials will deteriorates. Please take care in handling.
Carrying
1) 2) 3) 4) 5)
Don't stack boxes too high. Avoid placing heavy materials on boxes. Boxes must be positioned correctly during transportation to avoid breakage. Don't throw or drop boxes. Keep boxes dry. Avoid rain or snow. Minimal vibration and shock during transportation is desirable.
Storage
When storing Hics, please observe the following notices or possible deterioration of their electrical characteristics, risk of solderability, and external damage may occur. 1) Devices must be stored where fluctuation of temperature and humidity is minimal, and must not be exposed to direct sunlight. Store at the normal temperature of 5 to 30 degrees Celsius with humidity at 40 to 60%. 2) 3) 4) Avoid locations where corrosive gasses are generated or where much dust accumulates. Storage cases must be static proof. Avoid putting weight on boxes.
Extended storage
When extended storage is necessary, Hics must be kept non-processed. When using Hics which have been stored for more than one year or under severe conditions, be sure to check that the exterior is free from flaw and other damages.
Maximum ratings
To prevent any electrical damages, use Hics within the maximum ratings. current, voltage, etc. must not exceed these conditions.
The temperaqture,
Polarity
To protect Hics from destruction and deterioration due to wrong insertion, make sure of polarity in inserting leads into the board holes, conforming to the external view for the terminal arrangement.
4
HYBRID IC
M57184N-715B
UNINSULATED DC-DC CONVERTER
Marketing division, Marketing plannning department 6-41 Tsukuba, Isahaya, Nagasaki, 854-0065 Japan
Keep safety first in your circuit designs! - ISAHAYA Electronics Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (1)placement of substitutive, auxiliary circuits, (2)use of non-flammable material or (3)prevention against any malfunction or mishap. Notes regarding these materials - These materials are intended as a reference to assist our customers in the selection of the ISAHAYA products best suited to the customer's application; they don't convey any license under any intellectual property rights, or any other rights, belonging ISAHAYA or a third party. - ISAHAYA Electronics Corporation assumes no responsibility for any damage, or infringement of any third party's rights, originating in the use of any product data, diagrams, charts or circuit application examples contained in these materials. - All information contained in these materials, including product data, diagrams and charts, represent information on products at the time of publication of these materials, and are subject to change by ISAHAYA Electronics Coporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact ISAHAYA Electronics Corporation or an authorized ISAHAYA products distributor for the latest product infomation before purchasing product listed herein. - ISAHAYA Electronics Corporation products are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact ISAHAYA electronics corporation or an authorized ISAHAYA products distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. - The prior written approval of ISAHAYA Electronics Corporation is necessary to reprint or reproduce in whole or in part these materials. - If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a lisence from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. - Please contact ISAHAYA Electronics Corporation or an authorized ISAHAYA products distributor for further details on these materials or the products contained therein.
5
Aug.2003

▲Up To Search▲

Price & Availability of M57184N-715B

	To Download M57184N-715B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .