View SC887100_4322970.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

S/MON/SC887100/B/11/02/2002
page 1 /2 F/GB
Relais statique monophase de puissance Power Solid State Relay
* Sortie AC synchrone : 24-690VAC-75A 1600Vp * Possibilite de protection IP20 en option : Capot 1K460000 * Toute charge sur reseau haute tension * Adapte au controle de capacites ( PFC) * 24-690VAC -75A Zero-Cross AC Output. 1600Vp * IP20 Protection optional (1K460000). * Designed for all types of loads on high voltage mains * Suitable for capacitors loads : PFC ( high immunity - low zero cross voltage)
Dimensions/Size
SC887100
7-30VDC control 75A/690VAC output
Application typique/Typical application
27 22,8
0,5
28 O4,7 M4
protection reseau line protection
24-660VAC
19,6
1~ 58,2 43,2
2~ 47,6
Entree control 7-30VDC
4-
1
47,5
3+
+
5,1
3+
2
25,8 TOLERANCES 0,3
25,4 44,5
M3
* 1-2 peuvent etre inversees/ 1 -2 can be changed * le relais doit etre monte sur dissipateur thermique / SSR must be mounted on a heatsink * option : couvercle de protection des bornes : 1K460 000 / cover : 1K460 000
CHARGE/LOAD
Caracteristiques de commande (a 20C) / Control characteristics (at 20C) Parametre / Parameter Tension de commande / Control voltage Courant de commande / Control current (@ Uc ) Tension de relachement/Release voltage Resistance interne / Input internal resistor fig.1 Tension inverse / Reverse voltage Symbol Uc Ic Uc off Rc Urv Min 7 3 1 DC Nom Max 30 30 Unit V mA V V VRMS VRMS V
28 26 24 22 20 18 16 14 12 10 8 6 4 2 0
fig. 1 :Caracteristique d'entree / Control characteristic
fig1 : Caracteristique d'entree / Control characteristic
1000 30
Caracteristiques d'entree-sortie (a 20C) / Input-output characteristics (at 20C) Isolement entree-sortie/Input-output isolation @500m Ui 4000 Isolement sortie-semelle/Output-case isolation @500m Ui 3300 Tension assignee isolement/rated impulse voltage Uimp 4000 Caracteristiques generales / General characteristics Parametre / Parameter Poids/Weight Plage de temperature de stockage / Storage temperature range Plage de temperature de fonctionnement/Operating temperature range
Ic (mA)
0
2
4
6
8
10 12 14 16 18 20 22 24 26 28 30
Uc (V)
Conditions
Symbol
Typ. 90 -40 / +100 -40 / +100
Unit g C C
Proud to serve you
All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis.
celduc
r e l a i
s
S/MON/SC887100/B/11/02/2002
page 2 / 2 F/GB
Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) Parametre / Parameter Tension de charge / Load voltage Plage tension de fonctionnement / Operating range Tension crete / Peak voltage Niveau de synchonisation / Synchronizing level Tension d'amorcage / Latching voltage Courant nominal AC-51/ AC-51 nominal current Courant nominal AC-53/ AC-53 nominal current Courant nominal AC-56b/ AC-56b nominal current : capcitors loads Courant de surcharge non repetitif /Non repetitive overload current Chute tension directe crete/ On state voltage drop Courant de fuite etat bloque/ Off state leakage current Courant de charge minimum / Minimum load current Temps de fermeture/ Turn on time Temps d'ouverture/ Turn off time Plage de frequence / Operating frequency range dv/dt etat bloque / Off state dv/dt dI/dt maximum non repetitif/ Maximum di/dt non repetitive I2t (<10ms) EMC Test d'immunite conduite / Conducted immunity level EMC Test d'immunite conduite / Conducted immunity level Conformite / Conformity
110 100 90 80
Conditions (*)
Ie nom ( see Fig. 2 ) ( see Fig. 2 ) ( see Fig. 2 ) tp=10ms (Fig. 3) @ Ie nom @Ue, 50Hz Uc nom DC ,f=50Hz Uc nom DC ,f=50Hz
(**) IEC 1000-4-4 (burst) IEC 1000-4-5(schocks) EN60947-4-x
110 100
Symbol Typ. Unit Ue 600 V rms Uemin-max 24-690 V rms Up 1600 V Usync 10 V Ua 8 V Ie AC-51 75 A rms Ie AC-53 20 A rms Ie AC-56b 24 A rms Itsm 1000 A Vd 1,3 V Ilk <1 mA Ie min 5 mA ton max 10 ms toff max 10 ms f 0,1-440 Hz dv/dt 500 V/s di/dt 50 A/s I2t 5000 A2s 2kV criterion A 2kV crit.A with external VDR
Full on-state
0,75K/W
0,55K/W
Fig. 2 Courbes thermiques / Thermal characteristics
0,95K/W 70 % duty 1,6K/W
90 80 70
Total wasted power (W)
70 60 50 40 30 20
50 % duty
60 50 40
(*) : max 690VAC seulement sur charges resistives. only on resistive load (**) : minimum value : typically : 6600A2s
2,2K/W 30 % duty
30 20
10 0 0 10 20 30 40 50 60 70 RMS load current (A) 80 90 0
without heatsink
10
0 10 20 30 40 50 60 70 80 90 100 Ambient temperature (C)
Fig.3 Surcharge de courant : Itsm (Apeak) = f(t) pour modele 75A(Itsm=1000A) / Surge current : Itsm (Apeak) = f(t) for 75A models with Itsm =1000A 1500 Itsm (Apeak)
1 -Itsm non repetitif sans tension reappliquee est donne pour la determination des protections. No repetitive Itsm is given without voltage reapplied for the determination of the protection. 2 -Itsm repetitif est donne pour des surcharges de courant (Tj initiale=70C). La repetition de ces surcharges de courant diminue la duree de vie du Relais. Repetitive Itsm is given for inrush current with initial Tj = 70C. The repetition of the surge current decrease the lifetime SSR's .
1000
Surcharge de courant non repetitive sans tension reappliquee / No repetive surge current without voltage reapplied. Surcharge de courant repetitive avec tension reappliquee Repetive surge current with voltage reapplied.
500 0 0,01
0,1
t (s)
1
10
Precautions : Les relais a semiconducteurs ne procurent pas d'isolation galvanique entre le reseau et la charge.
Cautions : Semiconductor relays don't provide any galvanic insulation between the load and the mains.
celduc
r e l a i s
www.celduc.com
Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19

▲Up To Search▲

Price & Availability of SC887100

	To Download SC887100 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .