![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
2STA1943 High power PNP epitaxial planar bipolar transistor Features High breakdown voltage VCEO > -230V Complementary to 2STC5200 Fast-switching speed Typical fT = 30 MHz 3 Application Audio power amplifier 1 2 TO-264 Description This device is a NPN transistor manufactured using new BiT-LA (Bipolar Transistor for linear amplifier) technology. The resulting transistor shows good gain linearity behaviour. Figure 1. Internal schematic diagram Table 1. Device summary Order code 2STA1943 Marking 2STA1943 Package TO-264 Packaging Tube December 2007 Rev 2 1/9 www.st.com 9 Electrical ratings 2STA1943 1 Electrical ratings Table 2. Symbol VCBO VCEO VEBO IC ICM Ptot Tstg TJ Absolute maximum ratings Parameter Collector-base voltage (IE = 0) Collector-emitter voltage (IB = 0) Emitter-base voltage (IC = 0) Collector current Collector peak current Total dissipation at TC = 25C Storage temperature Operating junction temperature Value -230 -230 -5 -15 -30 150 -55 to 150 150 Unit V V V A A W C C Table 3. Symbol RthJ-case Thermal data Parameter Thermal resistance junction-case Max Value 0.83 Unit C/W 2/9 2STA1943 Electrical characteristics 2 Electrical characteristics (Tcase = 25C unless otherwise specified) Table 4. Symbol ICBO IEBO Electrical characteristics Parameter Collector cut-off current (IE = 0) Emitter cut-off current (IC = 0) Test conditions VCB = -230 V VEB = -5 V -230 -230 -5 IB = -800 mA VCE = -5 V VCE = -5 V VCE = -5 V 80 35 -3 -1.5 160 Min. Typ. Max. -5 Unit A -5 A Collector-emitter breakdown IC = -50 mA V(BR)CEO(1) voltage (I = 0) B V(BR)CBO Collector-base breakdown voltage (IE = 0) IC = -100 A IE = -1 mA IC = -8 A IC = -7 A IC = -1 A IC = -7 A V V V V V Emitter-base breakdown V(BR)EBO(1) voltage (I = 0) C VCE(sat)(1) VBE hFE Collector-emitter saturation voltage Base-emitter voltage DC current gain Resistive load Turn-on time Storage time Fall time Transition frequency Collector-base capacitance (IE = 0) ton ts tf fT CCBO VCC = -60 V IC = -5A IB1= -IB2 = -0.5 A IC = -1 A VCE = -5 V 0.24 1.2 0.21 30 225 s s s MHz pF VCB = -10 V f = 1 MHz 1. Pulsed: pulse duration = 300 s, duty cycle < 1.5% 3/9 Electrical characteristics 2STA1943 2.1 Figure 2. Electrical characteristics (curves) Safe operating area Figure 3. Derating curve Figure 4. Output characteristics Figure 5. DC current gain Figure 6. Collector-emitter saturation voltage Figure 7. Collector current vs base-emitter voltage 4/9 2STA1943 Electrical characteristics 2.2 Test circuit Figure 8. Resistive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 5/9 Package mechanical data 2STA1943 3 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 6/9 2STA1943 Package mechanical data TO-264 Mechanical data mm. Min. 4.80 2.50 0.90 1.0 2.5 2.8 0.50 25.6 19.80 5.15 19.50 2.30 3.55 0.60 0.85 26.4 20.20 5.75 20.50 2.70 3.65 Typ Max. 5.20 3.10 1.25 Dim. A A1 b b1 b2 c D E e L L1 oP 7/9 Revision history 2STA1943 4 Revision history Table 5. Date 18-Jun-2007 12-Dec-2007 Document revision history Revision 1 2 Initial release. Document promoted from preliminary data to datasheet. Changes 8/9 2STA1943 Revision history Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 9/9 |
Price & Availability of 2STA1943
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |