Specification TE -module PE-031-10-13
Issue 2
Issued: 29/05/2008
1/2
SPECIFICATION
ProductThermoelectric module Part NumberPE-031-10-13
1 Scope 1--1 1--2 This specification is applied to Multicomp thermoelectric modules Revision of these specifications is carried out after consent.
2 Specification 21 Parameters Parameters Internal resistance Imax. Vmax. Th=25 Qmax. Tmax. solder melting point Maximum. compress. 8.5 W 72 138 1MPa Note-4 Note-5 Note-6 Note-7 0.95 10% 3.9 A 3.8 V Remarks Note-1 Note-2 Note-3
Note-1 Measured by AC 4-terminal method at 25. Note-2 Maximum current at Tmax. Note-3 Maximum voltage at Tmax. Note-4 Maximum cooling capacity at Imax.,Vmax. and T0. Note-5 Maximum temperature difference at Imax.,Vmax. and Q0W. Maximum parameters are measured in a vacuum 1.3P Note-6 The solder melting point of thermoelectric module Note-7 Recommended maximum compression (not destruction limit)
2 -2 Recommendations: - maximum temperature for short time: 110 - operation temperature up to 90 for long lifetime; - good reliability in ON-OFF mode - recommended operation current not higher than 0.7 of Imax 3 Performance Graph
|
