 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| dual okpac Relais Statique Double Double Solid State Relay * Sortie AC synchrone : 12-280Vac-25A x 2 . * Deux Commandes pour 2 voies avec entree regulee et LED. * Connexion de Puissance et de Commande par FASTON * 12-280VAC -25A x 2 Zero-Cross AC Output. * Two Control for 2 legs with input current regulator and LED. * Power and Control connections by FASTON terminals S/BIP/SOB54246x/A/19/01/2006 page 1 / 2 F/GB SOB542460 3-32 VDC control 2x25A/230VAC output Dimensions L1 T1 L2 T2 12-280VAC 25A 12-280VAC 25A with heatsink made in FRANCE celduc (R) okpac input 3-32Vdc A1- A2+ (R) SOB542460 input 3-32Vdc B1- B2+ L1 + 1 input output T1 L2 - + 2 input output T2 - Caracteristiques d'entree / Control characteristics (at 25C) Parametre / Parameter Tension de commande / Control voltage Courant de commande / Control current (@ Uc ) Tension de non fonctionnement / Release voltage LED d'entree / Input LED Tension Inverse / Reverse voltage Parameter Poids/Weight Plage de temperature de stockage / Storage temprange Plage de temperature de fonctionnement/Operating temprange Symbol Uc Ic Uc off Urv Min 3 <10 2 DC Typ Max 5-12-24 32 <13 <13 verte / green 32 Typ. 90 -40/+100 -40/+100 Unit V mA V V Unit g C C Ic (mA) fig. 1 :Caracteristique d'entree / Control characteristic 14 12 10 8 6 4 2 0 024 6 8 10 12 14 16 18 20 22 24 26 28 30 32 Caracteristiques generales / General characteristics Uc (VDc) Caracteristiques d'entree-sortie (a 20C) / Input-output characteristics (at 20C) Isolement entree-sortie/Input-output isolation @500m Vrms Isolement sortie-semelle/Output-case isolation @500m : SOB542460 Vrms Isolement entre voies / Leg 1-Leg 2 isolation @500m Vrms 4000 2500 4000 V V V Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. celduc r e l a i s dual okpac Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) Parameter Tension de charge / Load voltage Plage tension de fonctionnement / Operating range Tension crete (ecreteur de tension) / Peak voltage (clamping voltage) Niveau de synchonisation / Synchronizing level Tension d'amorcage / Latching voltage Courant nominal AC-51/ AC-51 nominal current Facteur de puissance de la charge/ Load power factor Courant de surcharge non repetitif /Non repetitive overload current Chute tension directe crete/ On state voltage drop Courant de fuite etat bloque/ Off state leakage current Courant de charge minimum / Minimum load current Temps de fermeture/ Turn on time Temps d'ouverture/ Turn off time Plage de frequence / Operating frequency range dv/dt etat bloque / Off state dv/dt dI/dt maximum non repetitif/ Maximum di/dt non repetitive I2t (<10ms) Possibilite de protection exterieure / External protection possibilty Conditions S/BIP/SOB54246x/A/19/01/2006 page 2 / 2 F/GB Symbol Ul Ulmin-max Up Usync Ua Il AC1 Itsm Vd Ilk Ilmin ton max toff max f dv/dt di/dt I2t Typ. 230 12-280 600 35 8 25 > 0,8 250 1,6 1 5 10 10 47-63 500 50 340 Fuse Unit V rms V rms V V V A rms A V mA mA ms ms Hz V/s A/s A2s Il nom ( see Fig. 2 ) tp=10ms (Fig. 3) @ Il nom @Ul, 50Hz Uc nom DC ,f=50Hz Uc nom DC ,f=50Hz Fig. 2 Courbes thermiques / Thermal characteristics 70 65 60 55 Total wasted power (W) 50 45 40 35 30 25 20 15 10 5 0 0 5 10 15 20 RMS load current (A) 25 1,1K/W 1,5K/W 70 0,9K/W 65 60 55 50 45 40 35 30 25 20 2 ways 2,3K/W 1 way without heatsink 15 10 5 0 0 10 20 30 40 50 60 70 80 90 100 AMBIENT TEMPERATURE (C) Fig.3 Surcharge de courant : Itsm (Apeak) = f(t) pour modele 25A(Itsm=230A) Surge current : Itsm (Apeak) = f(t) for 25A models with Itsm =230A 250 Itsm (Apeak) 200 150 100 50 0 Surcharge de courant non repetitive sans tension reappliquee / No repetive surge current without voltage reapplied. Surcharge de courant repetitive avec tension reappliquee Repetive surge current with voltage reapplied. 1 -Itsm non repetitif sans tension reappliquee est donne pour la determination des protections. No repetitive Itsm is given without voltage reapplied for the determination of the protection. 2 -Itsm repetitif est donne pour des surcharges de courant (Tj initiale=70C). La repetition de ces surcharges de courant diminue la duree de vie du Relais. Repetitive Itsm is given for inrush current with initial Tj = 70C. The repetition of the surge current decrease the lifetime SSR's . 0,01 0,1 t(s) 1 10 Precautions : * Les relais a semiconducteurs ne procurent pas d'isolation galvanique entre le reseau et la charge. Cautions : * Semiconductor relays don't provide any galvanic insulation between the load and the mains. Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. celduc r e l a i s |
Price & Availability of SOB542460
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |