 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| S/TRI/SWT865080/C/7/07/2005 Relais Statique Triphase Three Phase Solid State Relays * Relais synchrone sortie AC Pret a l'emploi: pour charges resistives * Commande 8,5-30 VDC/ 10-30VAC . LED. * Protection interne par RC et ecreteur de tension . * IP20 *Dissipateur ventile avec protection thermique * Zero cross AC output. For resistives loads * 8,5-30 VDC; 10-30VAC control voltage with LED * Internal protection by and clamping voltage. * IP20 *Heatsink with fan & thermal protection Dimensions / Dimensions: 120 115 page 1 / 3 F/GB SWT865080 24 to 520 VAC - 3 x 50 ARMS thermostat open if >85C 110 Circuit equivalent/Equivalent circuit : L1/R 100 110 90 145 7+ 100 Adaptateur / Adapter U 126 L2/S 5 LED 93 172 Adaptateur / Adapter V L3/T Alimentation ventilateur/ fan supply 200/240VAC-50Hz/60Hz 8- Adaptateur / Adapter W Caracteristiques de commande (a 20C) / Control characteristics (at 20C) AC-DC Parametre / Parameter Symbol Min Nom Max Tension de commande / Control voltage : DC Uc 8,5 24 30 Tension de commande / Control voltage : AC Uc 10 24 30 Courant de commande / Control current (@ Uc ) Ic 15 50 65 Tension de relachement/Release voltage Uc off 4 Resistance interne / Input internal resistor fig.1 Rc 410 Tension inverse / Reverse voltage Urv polarity free Caracteristiques d'entree-sortie (a 20C) / Input-output characteristics (at 20C) Isolement entree-sortie/Input-output isolation @500m Ui 4000 Isolement sortie-semelle/Output-case isolation @500m Ui 3300 Tension assignee isolement/ Rated impulse voltage Uimp 4000 Caracteristiques generales / General characteristics Parametre / Parameter Poids/Weight Plage de temperature de stockage / Storage temperature range Plage de temperature de fonctionnement/Operating temperature range Unit VDC VAC mA V V VRMS VRMS V fig. 1 :Caracteristique d'entree / Control characteristic 70 60 50 Ic(mA) 40 30 20 10 0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Uc(V) Conditions Symbol Typ. 2500 -40 / +100 -40 / +100 Unit g C C Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. celduc r e l a i s S/TRI/SWT865080/C/7/07/2005 Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) Parametre / Parameter Tension de charge / Load voltage Plage tension de fonctionnement / Operating range Tension crete / Peak voltage Niveau de synchonisation / Synchronizing level Tension d'amorcage / Latching voltage Courant nominal AC-51 non permanent/ AC-51 no permanent nominal current Courant nominal AC-51/ AC-51 nominal current @25C Courant nominal AC-53/ AC-53 nominal current Puissance charge sous 400VAC TRI-Max load 3x400VAC AC-51 Courant de surcharge non repetitif /Non repetitive overload current Chute tension directe crete/ On state voltage drop Courant de fuite etat bloque/ Off state leakage current Courant de charge minimum / Minimum load current Temps de fermeture/ Turn on time Temps d'ouverture/ Turn off time Plage de frequence / Operating frequency range dv/dt etat bloque / Off state dv/dt dI/dt maximum non repetitif/ Maximum di/dt non repetitive I2t (<10ms) EMC Test d'immunite conduite / Conducted immunity level EMC Test d'immunite conduite / Conducted immunity level Conformite / Conformity Caracteristiques thermiques / thermal curves : 220 200 180 page 2 / 3 F/GB Conditions ( 480Vrms + 10% ) Symbol Ue Uemax Up Usync Ua Ie AC-51 Ie AC-51 Ie AC-53 Pn Itsm Vd Ilk Ie min ton max toff max f dv/dt di/dt I2t Typ. 400 530 1200 12 10 75 3x60 24 40 1000 1,4 1 5 10 10 10-400 500 50 5000 4kV criterion A 2kV crit.A Unit V rms V rms V V V A rms A rms A rms kW A V mA mA ms ms Hz V/s A/s A2s Ie nom ( see Fig. 2 ) ( see Fig. 2 ) ( see Fig. 2 ) tp=10ms (Fig. 3) @ Ie nom @Ue, 50Hz Uc nom DC ,f=50Hz Uc nom DC ,f=50Hz IEC 1000-4-4 (burst) IEC 1000-4-5(schocks) EN60947-4-x Full on -state 160 Total wasted power (W) 140 120 70% duty cycle heatsink max =100C 100 80 50% duty cycle heatsink max = 80C in compliance with EN60947-1 60 40 20 30% duty cycle Fig.3 Courbes de surcharge de courant / Overload current curves Surge current Itsm (A peak) = f(t) 1500 Itsm (Apeak) 0 0 5 10 15 20 25 30 35 40 45 50 55 60 0 RMS load current (A) 10 20 30 40 50 60 70 80 90 100 Ambient temperature (C) for models with Itsm =1000A 1000 No repetitive Itsm (Apeak)=f(t) without voltage reapplied 500 Repetitive Itsm (Apeak)=f(t) with voltage reapplied for initial Tj =70C 0 0,01 0,1 t (s) 1 10 1 -Itsm non repetitif sans tension reappliquee est donne pour la determination des protections. No repetitive Itsm is given without voltage reapplied for the determination of the protection. 2 -Itsm repetitif est donne pour des surcharges de courant (Tj initiale=70C). La repetition de ces surcharges de courant diminue la duree de vie du Relais. Repetitive Itsm is given for inrush current with initial Tj = 70C. The repetition of the surge current decrease the lifetime SSR's . Precautions : * Les relais a semiconducteurs ne procurent pas d'isolation galvanique entre le reseau et la charge. Cautions : * Semiconductor relays don't provide any galvanic insulation between the load and the mains. Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. celduc r e l a i s S/TRI/SWT865080/C/7/07/2005 page 3 / 3 F/GB SVT 1 Cablage commande / Wiring of the control circuit: nombre de fils/ NUMBER OF WIRES 2 SCREWDRIVER TYPE tournevis tournevis MINIMUM TORQUE couple serrage SOLID FINE STRANDED SOLID FINE STRANDED (No ferrule) (With ferrule) (No ferrule) (With ferrule) rigide sans embout multibrins avec rigide sans embout multibrins avec embouts embouts N.m 0,75 ... 2,5 mm2 0,75 ... 2,5 mm2 0,75 ... 2,5 mm2 0,75 ... 2,5 mm2 0,8 x 5,5 mm POZIDRIV 2 1,2 SVT 1 Cablage puissance / Wiring of the power circuit: NUMBER OF WIRES 2 SCREWDRIVER TYPE tournevis tournevis MINIMUM TORQUE couple serrage SOLID FINE STRANDED SOLID FINE STRANDED (No ferrule) (With ferrule) (No ferrule) (With ferrule) rigide sans embout multibrins avec rigide sans embout multibrins avec embouts embouts N.m 1,5 ... 10 mm2 1,5 ... 6 mm2 1,5 ... 10 mm2 1,5 ... 6 mm2 0,8 x 5,5 mm POZIDRIV 2 1,8 R S T R S T Resistive loads Application typique /Typical application: celduc r e l a i s www.celduc.com Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19 |
Price & Availability of SWT865080
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |