![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Amber PLCC4 Surface Mount LED with Domed Lens x x x x x x x OVSAABLCR8 High intensity with low power consumption White PLCC4 package with clear domed lens Wide viewing angle Packaged in 8mm tape on 7" diameter reel Compatible with automatic placement equipment Compatible with infrared and vapor phase reflow solder process Amber (591nm) Product Photo Here The OVSAABLCR8 is designed for wide angle, uniform light output. Its internal reflector and colorless clear lens optimize luminous intensity and make it ideal for backlighting applications and for coupling with light guides. Applications x Traffic lights x Signal and symbol luminaire x Mono-color indicators x Backlighting (LCD, switches, displays, illuminated advertising) x Interior automotive lighting (instrumentation clusters) x Safety marker lights (steps, exit ways) Part Number OVSAABLCR8 Material AlInGaP Emitted Color Amber Intensity Typ. mcd 1650 Lens Color Water Clear RoHS Moisture 1, 2, 3 CATHODE 4 ANODE DIMENSIONS ARE IN INCHES AND [MILLIMETERS]. DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 1 of 4 Amber PLCC4 SMD LED with Domed Lens OVSAABLCR8 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range Operating Temperature Range Soldering Temperature1 Reverse Voltage Continuous Forward Current Peak Forward Current (10% Duty Cycle, PW VHF Power Dissipation Note: 1. Solder time less than 5 seconds at temperature extreme. -40 ~ +100 C -40 ~ +100 C 260 C 5V 70 mA 200 mA 225 mW Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL IV VF IR D P PARAMETER Luminous Intensity Forward Voltage Reverse Current Dominant Wavelength Peak Wavelength 50% Power Angle MIN 900 ---------------- TYP 1650 2.6 ---591 594 60 MAX ---3.2 10 ---------- UNITS mcd V A nm nm deg CONDITIONS IF = 50 mA IF = 50 mA VR = 5 V IF = 50 mA IF = 50 mA IF = 50 mA 2 1/2 Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVSAABLCR8 may be filled with any or all bins contained as below. Standard Bins (IF = 50mA) Luminous Intensity (mcd) 1400 1120 900 710 560 620 628 635 W1 V2 V1 U2 Luminous intensity is at U2 bin or above. Dominant Wavelength (nm) Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 10/05 Page 2 of 4 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com OVSAABLCR8 Amber PLCC4 SMD LED with Domed Lens Typical Electro-Optical Characteristics Curves mA % V Forward Current vs Forward Voltage Relative Luminous Intensity vs Forward Current mA 100 75 % 50 25 0 300 Half Power WL = 20nm mA 400 500 nm 600 700 800 C Relative Luminous Flux vs Wavelength Maximum Forward DC Current vs Ambient Temperature 50% Power Angle: 120 v A Spatial Distribution Reverse Current vs Reverse Voltage OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 3 of 4 OVSAABLCR8 Amber PLCC4 SMD LED with Domed Lens Reel Dimensions: 7-inch reel Carrier Tape Dimensions: Loaded quantity 700 pieces per reel Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 10/05 Page 4 of 4 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com |
Price & Availability of OVSAABLCR8
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |