 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DC Converters TEN 3WI Series, 3 Watt RoHS compliant Features Ultra-wide 4:1 Input Range Full SMD-Design High Efficiency up to 84% Extended Operating Temperature Range -40C to +85C UL 60950-1 Excellent Load and Line Regulation Indefinite Short-circuit Protection I/O-Isolation 1'500 VDC Input Filter meets EN 55022, Class A and FCC, Level A without external Components Baseplate Shielded Metal Case with insulated Lead free Design, fully RoHS compliant 3 Year Product Warranty The TEN 3WI series is a family of dc-dc converter modules with 3W output power, featuring ultra wide 4:1 input voltage ranges of 9-36VDC or 18-75VDC. They come in a DIP-24 plastic package with industry-standard footprint. A high efficiency up to 84% allows operation ambient temperatures of -40C to +70C at full load. A built-in EMI input filter complies with EN 55022,class A without need of external components. Further standard features include over voltage protection and continuous short circuit protection. Typical applications for these converters are battery operated equipment and distributed power architectures in communication, instrumentation and industrial electronics, everywhere where isolated, tightly regulated voltages are required Models Ordercode TEN 3-2410WI TEN 3-2411WI TEN 3-2412WI TEN 3-2413WI TEN 3-2422WI TEN 3-2423WI TEN 3-4810WI TEN 3-4811WI TEN 3-4812WI TEN 3-4813WI TEN 3-4822WI TEN 3-4823WI 18 - 75 VDC (48 VDC nominal) 9 - 36 VDC (24 VDC nominal) Input voltage range Output voltage 3.3 VDC 5 VDC 12 VDC 15 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 12 VDC 15 VDC Output current max. 750 mA 600 mA 250 mA 200 mA 125 mA 100 mA 750 mA 600 mA 250 mA 200 mA 125 mA 100 mA Efficiency typ. 75 % 79 % 81 % 82 % 80 % 80 % 76 % 80 % 83 % 84 % 82 % 82 % http://www.tracopower.com Page 1 of 3 DC/DC Converters TEN 3WI Series Input Specifications Input current no load /full load Start-up voltage / under voltage shut down Surge voltage (1 sec. max.) Reverse voltage protection Conducted noise (input) 24 Vin models 20 mA typ. / 150 mA typ. 48 Vin models 10 mA typ. / 75 mA typ. 24 Vin models 9 VDC / 8.5 VDC typ. 48 Vin models 18 VDC / 16 VDC typ. 24 Vin models 50 V max. 48 Vin models 100 V max. 0.5 A max. EN 55022 level A, FCC part 15, level A 3 Watt Output Specifications Voltage set accuracy Regulation 2.0 % max. - Input variation Vin min. to Vin max. 1.0 % max. - Load variation 10 - 100 % single output models 1.0 % max. dual output models 3.0 % max. (balanced load) 75 mVpk-pk max 0.02 %/K >110% of Iout max., constant current 300 s typ. indefinite (automatic recovery) 3.3 5 12 12 12 15 VDC VDC VDC VDC VDC VDC models models models models models models 680 F max. 470 F max. 330 F max. 220 F max. 150 F max. (for each output) 100 F max. (for each output) - 40 C ... + 85 C + 100 C max. - 55 C ... + 125 C 3.5% /K above 70C 95 % rel H max. >1 Mio. h @ + 25 C 1'500 VDC 380 pF typ > 1`000 M Ohm 350 kHz typ. (Pulse width modulation PWM) UL 60950-1 , IEC 60950-1, EN 60950-1 CSA File No. 226037 CB report: www.tracopower.com/products/ten3wi_cb.pdf - Input/Output - Input/Output - Input/Output (500 VDC) Ripple and noise (20 MHz Bandwidth) Temperature coefficient Current limitation Transient response (25% load step change) Short circuit protection Capacitive load General Specifications Temperature ranges - Operating - Case temperature - Storage Derating Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217F ground benign) Isolation voltage (60 sec) Isolation capacity Isolation resistance Switching frequency Safety standards Safety approvals All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TEN 3WI Series Physical Specifications Case material Potting material Weight Soldering temperature non conductive black plastic epoxy (UL94V-0 rated) 12 g (0.42 oz) max. 265 C / 10 sec. 3 Watt Outline Dimensions mm (inches) (0.787) 23 Bottom view 23 22 9 1 1 (0.6) 15.24 Pin-Out Pin 2 3 9 11 14 16 22 23 Single -Vin (GND) -Vin (GND) No pin No function +Vout -Vout +Vin (Vcc) +Vin (Vcc) Dual -Vin (GND) -Vin (GND) Common -Vout +Vout Common +Vin (Vcc) +Vin (Vcc) 16 14 2.4 (0.094) 10.2 0.5 2.54 4.5 0.5 (0.1) (0.18 0.02) 20.0 (0.2) 15.24 (0.6) (0.9) 5.08 (0.2) 22.86 32 0.5 (1.25 0.02) Pin diameter o 0.5 0.05 (0.02 0.002) Tolerances 0.5 (0.02) Specifications can be changed any time without notice. Rev. 03/08 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43 311 45 11 * Fax +41 43 311 45 45 * info@traco.ch * www.tracopower.com 5.0 (0.4 0.02) Page 3 of 3 |
Price & Availability of TEN3-2410WI
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |