 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 527-149 Strain Relief Backshell for Size 2 ARINC 600 Series Connector ARINC 600 Backshells 527-149 NF P A3 B4 C5 Basic Part No. Finish (Table II) Connector Designator (Table III) Position and Dash No. (Table I) Omit Unwanted Positions 1.50 (38.1) Thread Size (MIL-C-38999 Interface) Position C A 1.79 (45.5) Position B 5.61 (142.5) .50 (12.7) Ref. A Cable Range Position A A View A-A Metric dimensions (mm) are indicated in parentheses. (c) 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com F-10 for Size 2 ARINC 600 Series Connector TABLE I: CABLE ENTRY Dash Shell Size A No. Ref. Ref. 1 09 .800 (20.3) .820 (20.8) 2 11 3 13 .870 (22.1) 4 15 .840 (21.3) 5 17 .910 (23.1) 6 19 1.000 (25.4) 1.030 (26.2) 7 21 1.160 (29.5) 8 23 Thread Size M12 X 1.0 M15 X 1.0 M18 X 1.0 M22 X 1.0 M25 X 1.0 M28 X 1.0 M31 X 1.0 M34 X 1.0 Cable Range Min Max .098 (2.5) .234 (5.9) .153 (3.9) .234 (5.9) .190 (4.8) .328 (8.3) .260 (6.6) .457 (11.6) .283 (7.2) .614 (15.6) .325 (8.3) .634 (16.1) .343 (8.7) .698 (17.7) .381 (9.7) .823 (20.9) TABLE II: FINISH OPTIONS Symbol B C* G* J LF M N Finish Symbol Finish Cadmium Plate/Olive Drab NC Zinc Cobalt/Dark Olive Drab Black Anodize NF Cadmium Plate/Olive Drab over Anodic Hard Coat Electroless Nickel Gold Iridite over Cadmium Plate T Cadmium Plate/Bright over over Electroless Nickel Electroless Nickel U** Cadmium Plate/Bright over Cadmium Plate/Black Electroless Nickel ZN Zinc-Nickel Alloy/Olive Drab Electroless Nickel *Anodize finish is not suitable for EMI shielding or grounding Cadmium Plate/Olive Drab over applications. to corrosion resisting steel backshells and **Applicable Electroless Nickel accessories. Consult factory for other available finishes. TABLE III: CONNECTOR DESIGNATOR ARINC 600 series connector backshells are designed to replace the insert retainer plates. Due to non-standard modifications by the connector manufacturer, the backshell may require special design alterations to mate properly. The following should be used to determine if a backshell modification is required. Prior to ordering, consult factory with connector part numbers not shown to ensure a proper fit. Connector Designator P Connector Description All Manufacturer's Plug and Receptacle Shells, Except for Those Listed Below (Prior to ordering, consult factory with connector part numbers not listed below to ensure a proper fit.) Cannon BKAD****322 Series Plug Cannon/Radiall Environmental Plug Cannon/Boeing BACC 66 Plug Radiall/Boeing BACC66 Plug Cannon BKAC & BKAE XXX322 Series Environmental Plug CAGE Code 06324 Printed in U.S.A. P1 P2 P3 P5 P6 (c) 2004 Glenair, Inc. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com F-11 ARINC 600 Backshells 527-149 Strain Relief Backshell |
Price & Availability of 527-149TPA2B3C1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |