![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MA4E2514 Series SURMOUNTTM Low and Medium Barrier Silicon Schottky Diodes: Tee Pair Features * Extremely Low Parasitic Capitance and Inductance * Surface Mountable in Microwave Circuits, No Wirebonds Required * Rugged HMIC Construction with Polyimide Scratch Protection * Reliable, Multilayer Metalization with a Diffusion Barrier, 100 % Stabilization Bake (300C, 16 hours) * Lower Susceptibility to ESD Damage A M/A-COM Products Rev. V5 B Description The MA4E2514 SURMOUNTTM Diode Tee Series are Silicon Low, and Medium Barrier Schottky Devices fabricated with the patented Heterolithic Microwave Integrated Circuit (HMIC) process. HMIC Circuits consist of Silicon pedestals which form diodes or via conductors embedded in glass dielectric, which acts as the low dispersion, low loss microstrip transmission medium. The combination of silicon and glass allows HMIC devices to have excellent loss and power dissipation characteristics in a low profile, reliable device. The Surmount Schottky devices are excellent choices for circuits requiring the small parasitics of a beam lead device coupled with the superior mechanical performance of a chip. The Surmount structure employs very low resistance silicon vias to connect the Schottky contacts to the metalized mounting pads on the bottom surface of the chip. These devices are reliable, repeatable, and a lower cost performance solution to conventional devices. They have lower susceptibility to electrostatic discharge than conventional beam lead Schottky diodes. The multi-layer metallization employed in the fabrication of the Surmount Schottky junctions includes a platinum diffusion barrier, which permits all devices to be subjected to a 16-hour non-operating stabilization bake at 300C. The "0505" outline allows for Surface Mount placement and multi-functional polarity orientations. D E D C Case Style 1116 DIM A B C D Sq. E INCHES MIN. 0.0445 0.0445 0.0040 0.0128 0.0128 MILLIMETERS MIN. 1.130 1.130 0.102 0.325 0.325 MAX. 0.0465 0.0465 0.0080 0.0148 0.0148 MAX. 1.180 1.180 0.203 0.375 0.375 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for * North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or volume is not guaranteed. information contained herein without notice. MA4E2514 Series SURMOUNTTM Low and Medium Barrier Silicon Schottky Diodes: Tee Pair Electrical Specifications @ 25C (Measured as Single Diodes) 1,2,3 Model Number Type Recommended Freq. Range Vf @ 1 mA (mV) 330 Max 300 Typ 470 Max 400 Typ M/A-COM Products Rev. V5 Vb @ 10 uA (V) 3 Min 5 Typ 3 Min 5 Typ Ct @ 0 V (pF) 0.12 Max 0.10 Typ 0.12 Max 0.10 Typ Rt Slope Resistance (Vf1- Vf2)/ (10.5 mA - 9.5 mA) () 16 Typ 20 Max 12 Typ 18 Max MA4E2514L MA4E2514M Low Barrier Medium Barrier DC - 18 GHz DC - 18 GHz 1. Rt is the dynamic slope resistance where Rt = Rs + Rj, where Rj = 26 / Idc (Idc is in mA) and Rs is the ohmic resistance. 2. Max Forward Voltage Difference Vf @ 1 mA: 10 mV Absolute Maximum Ratings 4 3. Max Total Capacitance Difference Ct @ 0 V: 0.03 pF Parameter Value -40C to +150C -40C to +150C 20 mA 5V + 20 dBm 50 mW Class 0 Applications The MA4E2514 Family of Surmount Schottky diodes are recommended for use in microwave circuits through Ku band frequencies for lower power applications such as mixers, sub-harmonic mixers, detectors and limiters. The HMIC construction facilitates the direct replacement of more fragile beam lead diodes with the corresponding Surmount diode, which can be connected to a hard or soft substrate circuit with solder. Operating Temperature Storage Temperature Forward Current Reverse Voltage RF C.W. Incident Power RF & DC Dissipated Power Electrostatic Discharge 5 ( ESD ) Classification Handling All semiconductor chips should be handled with care to avoid damage or contamination from perspiration and skin oils. The use of plastic tipped tweezers or vacuum pickups is strongly recommended for individual components. The top surface of the die has a protective polyimide coating to minimize damage. The rugged construction of these Surmount devices allows the use of standard handling and die attach techniques. It is important to note that industry standard electrostatic discharge (ESD) control is required at all times, due to the sensitive nature of Schottky junctions. Bulk handling should insure that abrasion and mechanical shock are minimized. 4. Exceeding any of these values may result in permanent damage. 5. Human Body Model Die Bonding For Hard substrates, we recommend utilizing a vacuum tip and force of 60 to 100 grams applied uniformly to the top surface of the device, using a hot gas bonder with equal heat applied across the bottom mounting pads of the device. When soldering to soft substrates, it is recommended to use a lead-tin interface at the circuit board mounting pads. Position the die so that its mounting pads are aligned with the circuit board mounting pads. Reflow the solder paste by applying equal heat to the circuit at both die-mounting pads. The solder joint must not be made one at a time, creating unequal heat flow and thermal stress. Solder reflow should not be performed by causing heat to flow through the top surface of the die. Since the HMIC glass is transparent, the edges of the mounting pads can be visually inspected through the die after the die attach is completed. Die Bonding Die attach for these devices is made simple through the use of surface mount die attach technology. Mounting pads are conveniently located on the bottom surface of these devices, and are opposite the active junction. The devices are well suited for high temperature solder attachment onto hard substrates. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for * North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or volume is not guaranteed. information contained herein without notice. MA4E2514 Series SURMOUNTTM Low and Medium Barrier Silicon Schottky Diodes: Tee Pair MA4E2514L Low Barrier SPICE PARAMETERS (Per Diode) 5 Is (nA) 26 M/A-COM Products Rev. V5 Rs () 12.8 N 1.20 Cj0 (pF) 1.0 E-2 M 0.5 Ik (mA) 14 Cjpar (pF) 9.0 E-2 Vj (V) 8.0 E-2 FC 0.5 BV (V) 5.0 IBV (mA) 1.0 E-2 MA4E2514L Medium Barrier SPICE PARAMETERS (Per Diode) 5 Is (nA) 5 E-1 Rs () 9.6 N 1.20 Cj0 (pF) 1.0 E-2 M 0.5 Ik (mA) 10 Cjpar (pF) 9.0 E-2 Vj (V) 8.0 E-2 FC 0.5 BV (V) 5.0 IBV (mA) 1.0 E-2 5. Spice parameters (Per Diode) are based on the MA4E2502 Series datasheet. Circuit Mounting Dimensions (Inches) 0.020 0.020 0.013 0.013 0.020 0.020 Ordering Information Part Number MA4E2514L-1116W MA4E2514L-1116 MA4E2514L-1116T MADS-002514-1116LP MA4E2514M-1116W MA4E2514M-1116 MA4E2514M-1116T MADS-002514-1116MP 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for * North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or volume is not guaranteed. Packaging Wafer on Frame Die in Carrier Surf Tape Pocket Tape on Reel Wafer on Frame Die in Carrier Surf Tape Pocket Tape on Reel information contained herein without notice. MA4E2514 Series SURMOUNTTM Low and Medium Barrier Silicon Schottky Diodes: Tee Pair MA4E2514 Schematic Per Diode Ct M/A-COM Products Rev. V5 Ls Rs Rj Schematic Values per Diode Model Number MA4E2514L MA4E2514M Ls (nH) 0.7 0.7 Rs () 13.4 9.4 Rj () 26 / Idc 26 / Idc Ct (pF) 0.10 0.10 MA4E2514 Equivalent Circuit 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for * North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macom.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or volume is not guaranteed. information contained herein without notice. |
Price & Availability of MA4E2514M-1116
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |