 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TECHNICAL DATA 2 KKA2586 1024 x 8-Bit n-MOS EEPROM with I C-Bus Interface The KKA2586 is a 8-Kbit (1024 x 8-bit) n-MOS floating gate electrically erasable programmable read only memory (EEPROM). IC works in systems with serial I2C-bus. Up to two KKA2586 devices may be connected to the I2C-bus.The programming of the array is implemented by electron's tunneling. The programming voltage is generated on-chip, using a voltage multiplier. Device is functionally identical to the SDA2586, Siemens. IC are made in 8-pin DIP and 8-pin SOP. FEATURES Non-volatile storage of information during 10 years Single supply (Ucc=4,75 B - 5,25 B) On-chip voltage multiplier On-chip generator of bulk biasing Serial input/output I2C-bus 10 000 ERASE/WRITE cycles per byte; Internal reprogramming (no external components) Duration of the ERASE/WRITE cycle is 15 ms Temperature range: 0 / +700C ELECTRICAL CHARACTERISTICS Parameter Supply current, mA Output low voltage (SDA), V High leakage current: -on output (SDA), A -on inputs SCL, SDA, A -on inputs CS, TP1, TP2,A Input capacitance, pF Clock input frequency, kHz Reprogramming cycle time, ms Erase of die cycle time, ms The number of E/W cycles on 1 byte Input high voltage: -inputs SDA, SCL, V -inputs CS, TP1, TP2, V Input low voltage: -inputs SDA, SCL, V -inputs CS, TP1, TP2, V Conditions UCC=5.25 B IOL=3 mA UCC=4.75B UOH=5,25 B UIH=5,25 B UIH=5,25 B UI= 0 B Erase and Write UTP2= 5,0 B Symbol ICC0 UOL Min. Max 20,0 0,4 ILOH ILIH ILIH CI fSCL tPROG tER 0 10,0 10 000 3,0 4,5 - 10,0 10,0 100,0 10,0 100 20,0 20,0 UCC UCC 1,5 0,2 KK UIH UIL PIN DESCRIPTION SYMBOL Uss CS TP1 TP2 SDA SCL TP3 Ucc PIN 1 2 3 4 5 6 7 8 DESCRIPTION GND Chip selection Testing pin Testing pin (0V - normal mode, 5V - chip erasing) Informational line, input/output Clock input Testing pin, not connected Supply Voltage PIN ASSIGNMENT Ucc TP3 U CS 1 2 8 7 TP1 3 4 6 5 SCL SDA TP2 1 KKA2586 N SUFFIX PLASTIC DIP (MS - 001BA) A 8 5 B 1 4 Dimension, mm Symbol A B MIN 8.51 6.1 MAX 10.16 7.11 5.33 0.36 1.14 2.54 7.62 0 2.92 7.62 0.2 0.38 10 3.81 8.26 0.36 0.56 1.78 F L C D C -T- SEATING PLANE F G M H J N G D 0.25 (0.010) M T K H J K L M N NOTES: 1. Dimensions "A", "B" do not include mold flash or protrusions. Maximum mold flash or protrusions 0.25 mm (0.010) per side. 2 |
Price & Availability of KKA2586
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |