View RK10J11E0034_4523031.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Knob Operating Type Potentiometer
With Knob Type
RK10J/RK14J Series
Low-profile, dip and reflow solderable.
Rotary Potentiometers Slide Potentiometers
Typical Specifications
Items Total resistance tolerance Maximum operating voltage Total rotational angle Operating life Operating temperature range
10 to 270 10 60
Specifications RK10J
30 50V AC, 20V DC Single-unit only 270 25 to 5 70 10,000cycles
RK14J
Product Line
Type Metal Shaft Insulated Shaft Knob Operating
10mm Size
Number of resistor elements
Single-unit
Knob type
Total Resistance Mounting resistance Soldering taper board type k
10 1B 3B 15A 3B 15C 15A Manual Insertion 2mm 20 10 20
For DC use
Minimum order unit pcs.
Products No.
RK10J11E0034 RK10J11E002Y
Drawing No.
20V DC 100 Not applicable
Dual-unit
Outer size 14 Knob thickness t0.9 Color Black
RK10J12E0A0A RK10J12E002L RK10J12E0024
1
Single-unit
Outer size 14 Knob thickness t1.0 Color Black Outer size 14 Knob thickness t2.5 Color Black
10
3B 15A 15C Reflow Surface mounting
20V DC
RK10J11R001Y RK10J11R0A0H 1,000 RK10J12R0A0B RK10J12R0052 RK10J12R0A0Z RK10J12R0A02 RK14J11A000G 3 2
Dual-unit
20 50 10
15A 3B 1B 3B 1B 15C 3B 1B 3B 15A Reflow Surface mounting Manual Insertion 2mm
Not applicable
Single-unit
50 100
20V DC 100 Not applicable 20V DC 1,000 Not applicable
RK14J11A0A02 RK14J11A0007 RK14J12A0A0U RK14J12A0A0K RK14J11R000J RK14J11R000H RK14J12R0A01 RK14J12R0A0C RK14J12R0A09 5 4
Dual-unit 14mm Size Single-unit
20 Outer size 15 Knob thickness t0.9 Color Black 50 10 50
Dual-unit
10
3B 15C
Notes
1. Products other than those listed in above products are also available. Please contact us for details. 2. Dip soldering can be applied to RK14J. For dip soldering applications, specify separately as "dip soldering applicable product.".
Refer to P.396 for product varieties.
394
Knob Operating Type Potentiometer
Without Knob Type RK10J/RK14J Series
Dimensions
No. Photo RK10J1 E
0.3 9.7 0.3 2.5 1.8 0.9 2 0.7 1 5 2.5 9.3 1.2 o14
Unit:mm
Style PC board mounting hole dimensions Viewed from mounting side Rotary Potentiometers Slide Potentiometers
4
1
Center of knob s hole 5-o1 4 8
4 8 5.35 7 6
7.5
RK10J1 R
14 10.4 2 2.5 1 0.9
0.3
3.2 2.5 1 o14
7.5
2.2
1.4 1.8
10 2.2
1
7.6
8.3
2
7.4
Metal Shaft Insulated Shaft Knob Operating
Center of knob
8.5 9.5
Solder lands are indicated by the shaded areas
4 8 5.35 6 0.8 0.3
4 8
5-1.2
RK10J12R
14 10.4 2 3.8 2.5 0.2 0.2
4.7 14 0.2 10 2.2 0.1
2.5 0.1
1 0.1
7.4 0.1 1.8
1.4
2.2
7.6
3
Center of knob 51.2 4 8
1
2-0.2 3.9 2-1.6 2-1.2 6.5 1.4 6.8 1.4 1.8 Wiring prohibited in the shaded areas 1.5 2-1 0.8 2.9 3.8 2-0.2
1
3.4 4.8 4 8 14.6 6.3 5-1.2 5.5 4 8
8.5 9.5
5.35
4 8
0.8 6
0.3
Solder lands are indicated by the shaded areas
R6.3
RK14J1 A
6.2 4 0.3
2 7 3.6 0.3 2.9 1 1.6 0.5
2.5 (0.9)
o15 2-0.7
Center of knob
2.75
4
6.1 6.4
2.35
0.12
4 8 10.2
R6.3
RK14J1 R
17.2 0.3 1 6.2 5.6
2 7 1.1 (0.6) 0.4 2.5 (0.9) o15 Center of knob. 1.5
6.4
5.8
5-
5
0.8 6.1 Solder lands are indicated by the shaded areas 0.12 8
4 8 10.2
1
1
o1
0.8 3.5
0.8 4.4
2
ho
le 1.1 s
0.3
1.4
8.3
1.4
395
Knob Operating Type Potentiometer
Product Varieties
In addition to the recommended products, the following specifications can also be accommodated.
Total Resistance Variety
Rotary Potentiometers Slide Potentiometers Total resistance k
10 20 50 100
Resistance Taper
Resistance taper
15A 1B 3B 15C
PC board Mounting Hole Details
Resistance taper A or B Single-unit Dual-unit 10mm Single-unit Dual-unit RK10J1 E Resistance taper C Single-unit Dual-unit
Dummy
Dummy
Dummy
12
3
R1 12 3 R2 1 2 3
12
Dummy
3
R1 1 23 R2 12 3
Metal Shaft Insulated Shaft Knob Operating
12
Dummy Dummy
3
R1 12 3 R2 1 2 3
12
Dummy Dummy
10mm Single-unit Dual-unit RK10J1 R Reflow-type 14mm Single-unit Dual-unit RK14J1 A RK14J1 R
3
R1 1 23 R2 12 3
Dummy
Dummy
Dummy
13 2
R1 3 1 2 R2 3 1 2
13 2
Dummy
R1 1 3 2 R2 1 3 2
Knob Variety
Knob variety Applicable models
Thickness t
Type
K4 K5 K1 K2 K3 K1
Outer Diameter D
14 16 14 14 16 15 15 18 15 15
Knob thickness mm
0.9
Color
Body thickness mm
1.8
RK10J11E RK10J12E RK10J11R RK10J12R Reflow-type
Black Gray Ivory White
3.0 1.0 Black 2.5 0.9
Black Gray Ivory White
4.0 2.5 3.8 2.5 4.6 2.0 Black 4.1
RK14J11A RK14J12A
Outside diameter D
K2 K3
3.0 0.9 3.0
RK14J11R RK14J12R Reflow-type
K1 K2
Mounting Plate Types and Terminal Types
RK14J1 A
4 3.6 2.5
Unit:mm
RK10J1 E
9.7 2.5
R7
2.8
Note
marked are specifications recommended by ALPS.
Refer to P.397, 502 for resistance taper.
396
Knob Operating Type Potentiometer
Orders Other Than Recommended Products
When ordering product varieties that are not listed in the Product Line, please specify by referring to the below example.
Sample Part Number
RK14J11A
Model type
Code RK10J11E RK10J12E RK10J11R RK10J12R RK14J11A RK14J12A RK14J11R RK14J12R
Model type 10mm size single-unit print terminal 10mm size dual-unit print terminal 10mm size single-unit Reflow type 10mm size dual-unit Reflow type 14mm size single-unit print terminal 14mm size dual-unit print terminal 14mm size single-unit Reflow type 14mm size dual-unit Reflow type
K1
B203
Rotary Potentiometers Slide Potentiometers
Metal Shaft Insulated Shaft Knob Operating
Shaft type (Outer diameter Thickness)
Code K1 K2 K3 K4 K5
V14 t0.9 V16 t3.0 RK10J1 E RK10J1 R RK14J1 A RK14J1 R V14 t1.0 V14 t2.5 V16 t2.5 V15 t0.9 V15 t3.0 V18 t3.0
J
100
V15 t0.9 V15 t3.0
100 90 80 70 60 50 40 30 20 10 90 80 70 60 50 40 30 Rotation travel (%) 20 10 0
C(1 5C )
90 80 70 60 50 40 30
V (v ol .c on B tro (1 l)( B) 3B )
G 100 (%)
Color : Black Resistance taper
Code A B Resistance taper
15A 1B
Code C V
Resistance taper
15C 3B
20 10 0 10
A) 15 A(
B: For tone & general V: For vol. Total resistance
Code 103 203 Total resistance
20
30
40
50
60
70
80
90 100
Output volt.across term.2-3 100 (%) Input volt. across term. 1-3 G
Output volt.across term.1-2
Input volt. across term. 1-3
J
100
Term."1"
Rotation travel (%)
J
Term."3"
Term."1"
J Term."3"
k
10 20
Code 503 104
Total resistance
k
50 100
Circuit Diagram
Single-unit
3 2 2
Dual-unit
3 3 2
Dual-unit resistance taper 15 C
3 3
2
1 1
2 1 1
1
Note
marked are specifications recommended by ALPS.
397
Knob Operating Type Potentiometers
List of Varieties
Type Without knob RK08H1 RK08H1 1 2 RK08H1 Reflow type 3 RK10J1 E With knob RK10J1 Reflow type R RK14J1 A RK14J1 Reflow type R Rotary Potentiometers Slide Potentiometers
Model Items
Vertical back-to-back mounting
Insertion type
Insertion type
Photo
Rated power Insulation resistance Voltage proof Strength Stopper strength of the operating Push-pull strength section In vertical direction against the P.W.B. surface Vibration Manual soldering Solder heat resistance Dip soldering Reflow soldering
Please see P.398 10 70 2 2 for 96h for 96h 40 390 2 , 90 0.1N m 10N max. 100M
0.03W min. 100V DC
Note
Contact us separately when you require reflow type taping specifications.
Electrical performance Mechanical performance Environmental performance
50k
100V AC for 1minute 70mN m 5N max.
Metal Shaft Insulated Shaft Knob Operating
10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z and for 2 hours respectively 350 max. 3s max. 260 5 4 1s Please see P.398 25 70 95 RH for 96h 394 2 2 Please see P.398 for 240h for 240h
Cold Dry heat Damp heat Page
Maximum Attenuation or Residual Resistance
Nominal total resistance
R 100k 100k R R 10k 50k 10k R
Application of non-standard
Maximum attenuation
90dB min. 80dB min. 70dB min.
Nominal total resistance
100k 50k R R 50k 10k
Residual resistance
0.1% or less of nominal total resistance 30 or less
10k 60dB min.
R
20
or less
389
Knob Operating Type Potentiometer
Soldering Conditions
Soldering Conditions
1. Recommended reflow conditions
Rotary Potentiometers Slide Potentiometers
Maximum temperature : 250uC max. 200uC
Preheat temperature : 150uC.
Room temperature 2 min. max. 40s max.
Metal Shaft Insulated Shaft Knob Operating
3s max.
4 min. max.
2. Cleaning 3. Type of solder to be used 4. Soldering Cleaning should not be attempted. Use cream solder that contains 10 - 15 %wt flux. Mounting plate should also be soldered.
Notes
1. When using an infrared reflow oven, solder may sometimes not be applied. Be sure to use a hot air reflow oven or a type that uses infrared rays in combination with hot air. 2. The temperatures given above are the maximum temperatures at the terminals of the potentiometer when employing a hot air reflow method. The temperature of the PC board and the surface temperature of the potentiometer may vary greatly depending on the PC board material, its size and thickness. Ensure that the surface temperature of the potentiometer does not rise to 250C or greater. 3. Conditions vary to some extent depending on the type of reflow bath used. Be sure to give due consideration to this prior to use.
398

▲Up To Search▲

Price & Availability of RK10J11E0034

	To Download RK10J11E0034 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .