XC6701 Series 28V Operation High Speed Voltage Regulators with Stand-by Function ETR0334-003 GENERAL DESCRIPTION The XC6701 series are positive voltage regulator ICs manufactured using CMOS process with 28V of operation voltage. The series consists of a voltage reference, an error amplifier, a current limiter, a thermal shutdown circuit and a phase compensation circuit plus a driver transistor. The output voltage is selectable in 0.1V increments within the range of 1.8V to 18V which fixed by laser trimming technologies. The output stabilization capacitor (CL) is also compatible with low ESR ceramic capacitors. The over current protection circuit and the thermal shutdown circuit are built-in. These two protection circuits will operate when the output current reaches current limit level or the junction temperature reaches temperature limit level. The CE function enables the output to be turned off and the IC becomes a stand-by mode resulting in greatly reduced power consumption. Packages are selectable depending on the applications from SOT-25, SOT-89, SOT-89-5, USP-6C, SOT-223, and TO-252. APPLICATIONS Car audio, Car navigation systems Note book computers, PDAs Home appliances Audio visuals, Digital cameras, Video cameras Cordless phones, Wireless communication FEATURES : More than 150mA (200mA limit) (VIN=VOUT(T)+3.0V) Dropout Voltage : 300mV@IOUT=20mA Input Voltage Range : 2.0V~28.0V Output Voltage Range : 1.8V~18.0V (100mV increments) High Accuracy : 2% Low Power Consumption : 50 A (VOUT(T)=5.0 Stand-by Current : Less than 0.1 A High Ripple Rejection : 50dB@1kHz Operating Temperature : -40 ~+85 Low ESR Capacitor : Ceramic Capacitor Compatible (Internal Phase Compensation) Small Packages : SOT-25, SOT-89, SOT-89-5, USP-6C, SOT-223, TO-252 Max Output Current TYPICAL APPLICATION CIRCUITS TYPICAL PERFORMANCE CHARACTERISTICS XC6701B/D 502 VIN=7.0V, tr=tf=5s CIN=CL =1.0F (ceramic), Ta=25 5.6 5.4 5.0 4.8 4.6 4.4 4.2 4.0 3.8 3.6 Time (1ms/div) Output Current 5.2 Output Voltage 150 120 90 1 F 1 F 60 30 0 1/32 Output Current: IOUT (mA) Output Voltage: VOUT (V) XC6701 Series PIN CONFIGURATION SOT-25 (TOP VIEW) SOT-89 (TOP VIEW) SOT-89-5 (TOP VIEW) USP-6C (BOTTOM VIEW) * The dissipation pad for the USP-6C package should be solder-plated in recommended mount pattern and metal masking so as to enhance mounting strength and heat release. If the pad needs to be connected to other pins, it should be connected to the VSS (No. 5) pin. SOT-223 (TOP VIEW) TO-252 (TOP VIEW) PIN ASSIGNMENT XC6701B Series SOT-25 1 2 3 4 5 PIN NUMBER SOT-89-5 5 2 4 3 1 USP-6C 6 5 2, 4 3 1 PIN NAME VIN VSS NC CE VOUT FUNCTIONS Power Input Ground No connection ON/OFF Control Output XC6701D Series PIN NUMBER SOT-223 3 2 1 PIN NAME VIN VSS VOUT FUNCTIONS Power Input Ground Output SOT-89 3 2 1 TO-252 1 2 3 2/32 XC6701 Series PRODUCT CLASSIFICATION Ordering Information XC6701 DESIGNATOR DESCRIPTION Type and Options of Regulators SYMBOL B D DESCRIPTION : Fixed output voltage with CE function (High Active) : Fixed output voltage with no CE function : For the voltage within 1.8V ~9.9V; e.g. 2.5V 25 5.0V 50 : For the voltage above 10.0V; e.g. 11.6V B6 15.2V F2 18.0V J0 : Output voltage 100mV increments, within e.g. 2.5V =2, =5, =2 : SOT-25 ( for B type only) : SOT-89 (for D type only) : SOT-89-5 (for B type only) : USP-6C (for B type only) : SOT-223 (for D type only) : TO-252 (for D type only) : Embossed tape, standard feed : Embossed tape, reverse feed 2% accuracy 18 ~ 99 Output Voltage A ~ H, J Output Voltage Accuracy 2 M P P E F J R L Packages Device Orientation 3/32 XC6701 Series BLOCK DIAGRAMS XC6701B Series (SOT-25, SOT-89-5, USP-6C) XC6701D Series (SOT-89, SOT-223, TO-252) R1 R1 R2 R2 ABSOLUTE MAXIMUM RATINGS XC6701B Series PARAMETER Input Voltage Output Current Output Voltage CE Input Voltage SOT-25 Power Dissipation SOT-89-5 USP-6C Operating Temperature Range Storage Temperature Range *1: IOUT Pd / (VIN-VOUT) Please see the condition in page 27. SYMBOL VIN IOUT VOUT VCE RATINGS VSS-0.3~30 300 (*1) VSS-0.3~VIN+0.3 VSS-0.3~30 250 UNIT V mA V V 600(wiring on the PCB) *2 Pd 500 1300(wiring on the PCB) *2 100 mW (TJ=25 ) 1000(wiring on the PCB) *2 Topr Tstg -40~+85 -55~+125 *2: The values of power dissipation is a reference data at wiring on the PCB. XC6701D Series PARAMETER Input Voltage Output Current Output Voltage SOT-89 Power Dissipation SOT-223 SYMBOL VIN IOUT VOUT RATINGS VSS-0.3~30 300 (*1) VSS-0.3~VIN+0.3 500 300 UNIT V mA V mW (TJ=25 ) Pd 1500(wiring on the PCB) *2 500 -40~+85 -55~+125 TO-252 Operating Temperature Range Storage Temperature Range *1: IOUT Pd / (VIN-VOUT) Topr Tstg *2: The values of power dissipation is a reference data at wiring on the PCB. Please see the condition in page 27. 4/32 XC6701 Series ELECTRICAL CHARACTERISTICS XC6701B Series PARAMETER Output Voltage SYMBOL VOUT(E) CONDITIONS IOUT=10mA, VCE=VIN VIN= VOUT(T)+3.0V , VCE=VIN VOUT(T) 3.0 VIN=VOUT(T)+3.0V, VCE=VIN (VOUT(T) 3.0V) 1mA IOUT 50mA , VCE=VIN 1.8V VOUT(T) 5.0V 1mA IOUT 50mA , VCE=VIN 5.1V VOUT(T) 12.0V 1mA IOUT 50mA , VCE=VIN 12.1V VOUT(T) 18.0V IOUT=20mA, VCE=VIN IOUT=100mA ,VCE=VIN 1.8V Supply Current Stand-by Current Line Regulation 1 Line Regulation 2 Input Voltage Output Voltage Temperature Characteristics Ripple Rejection Rate Short Current CE "H" Level Voltage CE "L" Level Voltage CE "H" Level Current CE "L" Level Current Thermal Shutdown Detect Temperature Thermal Shutdown Release Temperature Hysteresis Width NOTE: *1: VOUT(T): Specified output voltage *2: VOUT(E): Effective output voltage (i.e. the output voltage when "VOUT(T)+2.0V" is provided at the VIN pin while maintaining a certain IOUT value.) *3: Vdif={VIN1 {Note 5} MIN. Ta=+25 TYP. E-0 MAX. UNIT V CIRCUIT 150 100 - 50 110 180 E-2 E-3 90 175 275 mA mA Maximum Output Current IOUTMAX Load Regulation VOUT mV Dropout Voltage 1 Dropout Voltage 2 Vdif1 Vdif2 ISS Istby VOUT / VIN VOUT(T) VOUT / VIN VOUT(T) VIN VOUT / Ta VOUT(T) mV mV 105 115 125 0.10 0.10 0.30 28.0 VIN 0.35 0.1 0.1 A %V %V V ppm/ dB mA V V A A A VOUT(T) VOUT(T) VCE=VSS 5.0V 12.0V 11 11 11 2.0 50 60 65 0.01 0.05 0.15 100 50 40 150 125 25 5.1V 12.1V VOUT(T) 18.0V VOUT(T)+2.0V VIN 28.0V IOUT=5mA , VCE=VIN VOUT(T)+2.0V VIN 28.0V IOUT=13mA , VCE=VIN IOUT=20mA, VCE=VIN -40 Ta 85 VIN=[VOUT(T)+2.0V]+0.5Vp-pAC IOUT=20mA , f=1kHz , VCE=VIN VIN=VOUT(T)+2.0V , VCE=VIN VIN=28.0V VIN=28.0V VIN=VCE=28.0V VIN=28.0V, VCE=VSS Junction Temperature Junction Temperature Junction Temperature 1.1 0 -0.1 -0.1 - PSRR Ishort VCEH VCEL ICEH ICEL TTSD TTSR TTSD-TTSR - VOUT1 {Note 4} } 3.0V, IOUT{VOUT(T)+2.0V} is input. *4: VOUT1: A voltage equal to 98% of the output voltage whenever an amply stabilized when VOUT(T) < 3.0V, IOUT{VOUT(T)+3.0V} is input. : A voltage equal to 98% of the output voltage whenever an amply stabilized when VOUT(T) *5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased. *6: Unless otherwise stated, VIN=VOUT(T)+2.0V. 5/32 XC6701 Series ELECTRICAL CHARACTERISTICS (Continued) XC6701D Series Ta=+25 PARAMETER Output Voltage SYMBOL VOUT(E) CONDITIONS MIN. IOUT=10mA VIN= VOUT(T)+3.0V VOUT(T) 3.0 VIN=VOUT(T)+3.0V (VOUT(T) 3.0V ) 1mA IOUT 50mA 1.8V VOUT(T) 5.0V 1mA IOUT 50mA 5.1V VOUT(T) 12.0V 1mA IOUT 50mA 12.1V VOUT(T) 18.0V IOUT=20mA IOUT =100mA , VCE=VIN 1.8V Supply Current ISS VOUT / VIN VOUT(T) VOUT / VIN VOUT(T) VIN VOUT / Ta VOUT(T) PSRR Ishort TTSD TTSR TTSD-TTSR IOUT=20mA -40 Ta 85 VIN=[VOUT(T)+2.0V]+0.5Vp-pAC IOUT=20mA , f=1kHz VIN=VOUT(T)+2.0V Junction Temperature Junction Temperature Junction Temperature VOUT(T) 5.0V 11 11 11 2.0 5.1V VOUT(T) 12.0V 12.1V VOUT(T) 18.0V VOUT(T)+2.0V VIN 28.0V IOUT=5mA VOUT(T)+2.0V VIN 28.0V IOUT=13mA 150 100 TYP. E-0 50 110 180 E-2 E-3 50 60 65 0.05 0.15 100 50 40 150 125 25 105 115 125 0.10 0.30 28.0 90 175 275 mV mV A A %V %V V ppm/ dB mA mV MAX. V mA mA UNIT CIRCUIT Maximum Output Current IOUTMAX Load Regulation VOUT Dropout Voltage1 Dropout Voltage2 Vdif1 Vdif2 Line Regulation1 Line Regulation2 Input Voltage Output Voltage Temperature Characteristics Ripple Rejection Rate Short Current Thermal Shutdown Detect Temperature Thermal Shutdown Release Temperature Hysteresis Width NOTE: *1: VOUT(T): Specified output voltage *2: VOUT(E): Effective output voltage (i.e. the output voltage when "VOUT(T)+2.0V" is provided at the VIN pin while maintaining a certain IOUT value.) *3: Vdif={VIN1 {Note 5} - VOUT1 {Note 4} } 3.0V, IOUT{VOUT(T)+2.0V} is input. *4: VOUT1: A voltage equal to 98% of the output voltage whenever an amply stabilized when VOUT(T) < 3.0V, IOUT{VOUT(T)+3.0V} is input. : A voltage equal to 98% of the output voltage whenever an amply stabilized when VOUT(T) *5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased. *6: Unless otherwise stated, VIN=VOUT(T)+2.0V. 6/32 XC6701 Series ELECTRICAL CHARACTERISTICS (Continued) Voltage Chart SYMBOL PARAMETER E-0 E-2 DROPOUT VOLTAGE 1 (mV) IOUT=20mA E-3 DROPOUT VOLTAGE 2 (mV) IOUT=100mA OUTPUT VOLTAGE SETTING OUTPUT VOLTAGE (V) V (2% products) VOUT(T) (V) 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 MIN. 1.764 1.862 1.960 2.058 2.156 2.254 2.352 2.450 2.548 2.646 2.744 2.842 2.940 3.038 3.136 3.234 3.332 3.430 3.528 3.626 3.724 3.822 3.920 4.018 4.116 4.214 4.312 4.410 4.508 4.606 4.704 4.802 4.900 4.998 5.096 5.194 5.292 5.390 5.488 5.586 5.684 5.782 5.880 VOUT MAX. 1.836 1.938 2.040 2.142 2.244 2.346 2.448 2.550 2.652 2.754 2.856 2.958 3.060 3.162 3.264 3.366 3.468 3.570 3.672 3.774 3.876 3.978 4.080 4.182 4.284 4.386 4.488 4.590 4.692 4.794 4.896 4.998 5.100 5.202 5.304 5.406 5.508 5.610 5.712 5.814 5.916 6.018 6.120 TYP. 550 550 450 450 390 390 390 310 310 310 310 310 260 260 260 260 260 260 260 260 260 260 220 220 220 220 220 220 220 220 220 220 190 190 190 190 190 190 190 190 190 190 190 Vdif1 MAX. 710 710 600 600 520 520 520 450 450 450 450 450 360 360 360 360 360 360 360 360 360 360 320 320 320 320 320 320 320 320 320 320 280 280 280 280 280 280 280 280 280 280 280 TYP. 2200 2200 1900 1900 1700 1700 1700 1500 1500 1500 1500 1500 1300 1300 1300 1300 1300 1300 1300 1300 1300 1300 1100 1100 1100 1100 1100 1100 1100 1100 1100 1100 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 Vdif2 MAX. 2700 2700 2600 2600 2200 2200 2200 1900 1900 1900 1900 1900 1700 1700 1700 1700 1700 1700 1700 1700 1700 1700 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1300 1300 1300 1300 1300 1300 1300 1300 1300 1300 1300 7/32 XC6701 Series ELECTRICAL CHARACTERISTICS (Continued) Voltage Chart (Continued) SYMBOL PARAMETER E-0 E-2 DROPOUT VOLTAGE 1 (mV) IOUT=20mA E-3 DROPOUT VOLTAGE 2 (mV) IOUT=100mA OUTPUT VOLTAGE SETTING OUTPUT VOLTAGE (V) V (2% products) VOUT(T) (V) 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 7.0 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 8.0 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9.0 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 10.0 MIN. 5.978 6.076 6.174 6.272 6.370 6.468 6.566 6.664 6.762 6.860 6.958 7.056 7.154 7.252 7.350 7.448 7.546 7.644 7.742 7.840 7.938 8.036 8.134 8.232 8.330 8.428 8.526 8.624 8.722 8.820 8.918 9.016 9.114 9.212 9.310 9.408 9.506 9.604 9.702 9.800 VOUT MAX. 6.222 6.324 6.426 6.528 6.630 6.732 6.834 6.936 7.038 7.140 7.242 7.344 7.446 7.548 7.650 7.752 7.854 7.956 8.058 8.160 8.262 8.364 8.466 8.568 8.670 8.772 8.874 8.976 9.078 9.180 9.282 9.384 9.486 9.588 9.690 9.792 9.894 9.996 10.098 10.200 TYP. 190 190 190 190 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 Vdif1 MAX. 280 280 280 280 230 230 230 230 230 230 230 230 230 230 230 230 230 230 230 230 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 190 TYP. 1000 1000 1000 1000 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 700 Vdif2 MAX. 1300 1300 1300 1300 1150 1150 1150 1150 1150 1150 1150 1150 1150 1150 1150 1150 1150 1150 1150 1150 950 950 950 950 950 950 950 950 950 950 950 950 950 950 950 950 950 950 950 950 8/32 XC6701 Series ELECTRICAL CHARACTERISTICS (Continued) Voltage Chart (Continued) SYMBOL PARAMETER E-0 E-1 DROPOUT VOLTAGE 1 (mV) IOUT=20mA E-2 DROPOUT VOLTAGE 2 (mV) IOUT=100mA OUTPUT VOLTAGE SETTING OUTPUT VOLTAGE (V) V (2% products) VOUT(T) (V) 10.1 10.2 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8 11.9 12.0 12.1 12.2 12.3 12.4 12.5 12.6 12.7 12.8 12.9 13.0 13.1 13.2 13.3 13.4 13.5 13.6 13.7 13.8 13.9 14.0 MIN. 9.898 9.996 10.094 10.192 10.290 10.388 10.486 10.584 10.682 10.780 10.878 10.976 11.074 11.172 11.270 11.368 11.466 11.564 11.662 11.760 11.858 11.956 12.054 12.152 12.250 12.348 12.446 12.544 12.642 12.740 12.838 12.936 13.034 13.132 13.230 13.328 13.426 13.524 13.622 13.720 VOUT MAX. 10.302 10.404 10.506 10.608 10.710 10.812 10.914 11.016 11.118 11.220 11.322 11.424 11.526 11.628 11.730 11.832 11.934 12.036 12.138 12.240 12.342 12.444 12.546 12.648 12.750 12.852 12.954 13.056 13.158 13.260 13.362 13.464 13.566 13.668 13.770 13.872 13.974 14.076 14.178 14.280 TYP. 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 Vdif1 MAX. 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 TYP. 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 Vdif2 MAX. 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 9/32 XC6701 Series OUTPUT VOLTAGE CHART (Continued) Voltage Chart (Continued) SYMBOL PARAMETER E-0 E-1 DROPOUT VOLTAGE 1 (mV) IOUT=20mA E-2 DROPOUT VOLTAGE 2 (mV) IOUT=100mA OUTPUT VOLTAGE SETTING OUTPUT VOLTAGE (V) V (2% products) VOUT(T) (V) 14.1 14.2 14.3 14.4 14.5 14.6 14.7 14.8 14.9 15.0 15.1 15.2 15.3 15.4 15.5 15.6 15.7 15.8 15.9 16.0 16.1 16.2 16.3 16.4 16.5 16.6 16.7 16.8 16.9 17.0 17.1 17.2 17.3 17.4 17.5 17.6 17.7 17.8 17.9 18.0 MIN. 13.818 13.916 14.014 14.112 14.210 14.308 14.406 14.504 14.602 14.700 14.798 14.896 14.994 15.092 15.190 15.288 15.386 15.484 15.582 15.680 15.778 15.876 15.974 16.072 16.170 16.268 16.366 16.464 16.562 16.660 16.758 16.856 16.954 17.052 17.150 17.248 17.346 17.444 17.542 17.640 VOUT MAX. 14.382 14.484 14.586 14.688 14.790 14.892 14.994 15.096 15.198 15.300 15.402 15.504 15.606 15.708 15.810 15.912 16.014 16.116 16.218 16.320 16.422 16.524 16.626 16.728 16.830 16.932 17.034 17.136 17.238 17.340 17.442 17.544 17.646 17.748 17.850 17.952 18.054 18.156 18.258 18.360 TYP. 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 Vdif1 MAX. 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 TYP. 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 650 Vdif2 MAX. 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 850 10/32 XC6701 Series OPERATIONAL EXPLANATION R1 R2
|