 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AND113G/GP Standard LED Standard Bright LED LAMPS Weight: 0:30 g o5.8 0.2 Unit: mm AND113G Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. o5.0 0.2 AND113G/GP 12.75 0.5 7.6 (1) 2.5 max including resin Standard LED T-1 3/4 Package (5 mm) Features * Low power requirement * Flush-mount * All plastic molded lens * Color: GaP-Green Optical Characteristics (Ta = 25C) Color LED Green Lens Green Clear Lens Desc. Axial Luminous Intensity (mcd) Min. 20 Typ. 50 Test Condition (IF-mA) 10 Viewing Angle 21/2 (deg) 30 0.5 Cathode Index 21.1 * RoHS Compliant 2.54 Cathode Index 1 2 0.5 1. Anode 2. Cathode 1.5 o5.0 0.2 2.5 max including resin o5.8 0.2 AND113GP 7.6 Absolute Maximum Ratings (Ta = 25C) (1) 0.5 26.5 Characteristics Symbol IF VR PD TOpr TStg Rating (Yellow) 25 5 105 -40 to +85 -40 to +85 Unit mA V mW C C Forward Current (DC) 1.5 Reverse Voltage Power Dissipation 2.54 Cathode Index 1 2 0.5 Operating Temperature 1. Anode 2. Cathode Storage Temperature Range Electro-Optical Characteristics (Ta = 25C) Yellow Characteristics Symbol VF IR p Test Condition Min. Typ. 2.1 - 565 30 Max. 2.5 10 - - V A nm nm IF = 20mA VR = 5 V IF = 15mA IF = 15mA - - - - Unit Forward Voltage Reverse Current Peak Emission Wavelength Spectral Line Half Width Precaution Please be careful of the following: 1. Soldering temperature: 260C max; Soldering time: 5 sec. max; Soldering portion of lead: up to 1.6 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Purdy Electronics Corporation * 720 Palomar Avenue * Sunnyvale, CA 94085 Tel: 408.523.8200 * Fax: 408.733.1287 * sales@purdyelectronics.com 7/18/07 1 www.purdyelectronics.com AND113G/GP Standard LED Standard Bright LED LAMPS IF vs. VF 50 30 TA = 25C 20 30 10 50 5 3 2 1 1.7 60 70 80 90 1.0 1.8 1.9 2.0 2.1 Forward Voltage VF (V) IV vs. IF 5 1.0 2.2 2.3 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 40 10 0 10 20 30 40 50 60 70 80 90 1.0 Radiation Pattern Forward Current IF (mA) 20 Relative Luminous Intensity - Wavelength Relative Luminous Intensity IV 2 Relative Luminous Intensity 2 5 10 20 50 0.8 1 0.5 0.6 0.4 0.2 0.1 1 0.2 0 540 560 580 600 620 640 Wavelength (nm) Forward Current IF (mA) This graph shows relative luminous vs. forward current. At three points (IF = 10, 15, 20mA) each relation is normalized.) IV vs. TC 3 IV vs.TA Relative Luminous Intensity IV 2 Allowable Forward Current IF (mA) 0 20 40 60 Case Temperature TC (C) 80 40 30 1 20 0.5 0.4 0.3 -20 10 0 0 20 40 60 80 100 Ambient Temperature TA (C) 2 Purdy Electronics Corporation * 720 Palomar Avenue * Sunnyvale, CA 94085 Tel: 408.523.8200 * Fax: 408.733.1287 * sales@purdyelectronics.com 7/18/07 www.purdyelectronics.com |
Price & Availability of AND113G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |