 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Cree(R) 5-mm Oval LED Model # LO566EBL3-70G-A3-MT Data Sheet 70-degree, 5-mm oval LED lamp in blue color with tinted, transparent lens and stopper Applications * * Variable-Message Signs Message Boards Absolute Maximum Ratings (TA = 25C) Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Lead Soldering Temperature Note Symbol IF IFP VR PD Topr Tstg Tsol Absolute Maximum Rating 25 100 5 100 -40 ~ +95 -40 ~ +100 Unit mA mA V mW C C Max. 260C for 3 sec. max. (3 mm from the base of the epoxy bulb) Note: Pulsewidth0.1msec,duty1/10. Typical Electrical & Optical Characteristics (TA = 25C) Characteristics Forward Voltage Reverse Current Dominant Wavelength Luminous Intensity 50% Power Angle Symbol VF IR D IV 21/2H-H 21/2V-V Condition IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA Unit V A nm mcd deg deg 465 550 470 1450 70 35 Minimum Typical 3.4 Maximum 4.0 100 475 D-CT532.001 Data Sheet: CL Subject to change without notice. www.cree.com/ledlamps 1 Standard Bins for LO566EBL3-70G-A3-MT (IF = 20 mA) Lamps are sorted to luminous intensity (IV)anddominantwavelength(D) bins shown. OrdersforLO566EBL3-70G-A3-MTmaybefilledwithanyorallbinscontainedasbelow. All luminous intensity (IV)anddominantwavelength(D)valuesshownandspecifiedareatIF = 20 mA. X4 X5 V or above Luminous Intensity (IV) 2130 mcd U 1520 mcd T 1100 mcd S 770 mcd R 550 mcd 465 nm 470 nm DominantWavelength(D) 475 nm Forward Voltage (VF) Rank Voltage V7 2.8-3.0V V8 3.0-3.2V V9 3.2-3.4V V10 3.4-3.6V V11 3.6-3.8V V12 3.8-4.0V *Majority VF bins are highlighted in Yellow Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Pb content <1000 ppm. 3. Tolerance of measurement of luminous intensity is 15%. 4. Tolerance of measurement of dominant wavelength is 1 nm. 5. Tolerance of measurement of VF is 0.05 V. 6. Packaging methods are available for selection; please refer to the "Cree LED Lamp Packaging Standard" document. 7. Please refer to the "Cree LED Lamp Reliability Test Standards" document for reliability test conditions. 8. Pleaserefertothe"CreeLEDLampSoldering&Handling"documentforinformationabouthowtousethisLED product safely. Copyright (c) 2008 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/ledlamps 2 CLD-CT532.001 Graphs 1. Cathode PAD Area (0.18 x 0.18inch2) 2.Heightabovenominalseatingplaneininches(0.3inch) Copyright (c) 2008 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/ledlamps 3 CLD-CT532.001 Mechanical Dimensions All dimensions are in mm. Tolerance is 0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may be 0.5 mm max. Notes RoHSCompliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive2002/95/EContherestrictionoftheuseofcertainhazardoussubstancesinelectricalandelectronicequipment (RoHS),asamendedthroughApril21,2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. 4 Copyright (c) 2008 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT532.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/ledlamps Kit Number System CreeLEDlampsaretestedandsortedintoperformancebins.Abinisspecifiedbyrangesofcolor,forwardvoltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. CreeLEDsaresoldbyordercodesincombinationsofbinscalledkits.Ordercodesareconfiguredinthefollowing manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV 1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . :special request * Packing type Product P/N 0: Standard = Bulk pack 1~9, A~Z . . . : special request * * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number Description Contact Cree Sales * Please contact your Cree representative about the availability of non-standard kits. Copyright (c) 2008 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/ledlamps 5 CLD-CT532.001 |
Price & Availability of LO566EBL3-70G-A3-MT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |