|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
ECO-PACTM 1 Rectifier Module for Power Factor Correction Preliminary Data Sheet Fast Single Phase Rectifier Ultra Fast Boost Chopper PSBI 9/06 IFAV25 VRRM IC25 VCES = 15A = 1200 V = 37A = 600 V Typical Rectified Mains Power Pn = 900 W at Vn = 110 V Pn = 2100 W at Vn = 240 V at VDC = 400 V, fT = 75 kHz, TC = 80C Input Rectifier Bridge Features Symbol VRRM IFAV25 IFAV80 IFSM Test Conditions TC = 25C; TC = 80C; TVJ = 25C 180 sine 180 sine t = 10 ms Maximum Ratings 1200 15 10 75 V A A A (50 Hz), sine Symbol IR VF trr RthJC RthJS Test Conditions VR = VRRM, IF = 10A, TVJ = 25C TVJ = 125C TVJ = 25C TVJ = 125C Characteristic Value typ. 0.5 1.4 1.6 1 2.5 tbd 1.8 max. 0.05 mA mA V V s K/W K/W VR = 100 V, IF = 10 A -di/dt = 5 A/s per diode with heat transfer paste Chopper T Symbol VCES VGES IC25 IC80 RBSOA tSC Test Conditions TVJ = 25C to 150C continous TC = 25C; TC = 80C; VCE = 600 V, RG = 10 , TVJ = 125C Clamped inductive load, L= 100 H VCE = 600 V, RG = 10 , VGE = 15 V TVJ = 125C, non-repetitive Maximum Ratings 600 20 37 25 ICM = 100 VCEK VCES V V A A A * Package with DCB ceramic base plate and soldering pins for PCB mounting * Isolation voltage over 3000 V * Planar glasspassivated chips * high level of integrationonly one power semiconductor module required for the whole PFC rectifier * standard PFC control ICs usable * fast rectifier diodes for enhanced EMC behaviour * NPT IGBT with low saturation voltage, ultra fast switching capability, high RBSOA and short circuit ruggedness * internally series connected HiPerFRED free wheeling diode For fast and soft reverse recovery at high switching frequency * leads suitable for PC board soldering * UL registered, E 148688 Applications * single phase rectification with power factor correction (PFC) * low harmonic content of mains current * mains current and voltage in phase * wide input voltage range, controlled output voltage 10 s POWERSEM GmbH, Walpersdorfer Str. 53 91126 D- Schwabach Phone: 09122 - 9764-0 Fax.: 09122 - 9764-20 2005 POWERSEM reserves the right to change limits, test conditions and dimensions PSBI 9/06 Symbol ICES IGES VCE(sat) VGE(th) td(on) tr td(off) tf Eon Eoff Cies QGon RthJC RthJS Test Conditions VCE = VCES, VGE = 0 V, VCE = 0 V, VGE = 20 V IC = 10A, VGE = 15 V IC = 1mA, VGE = VCE Inductive load, TVJ = 125C VCE = 400 V, IC = 10A RG = 10 , VGE = 15 V TVJ = 25C TVJ = 125C TVJ = 25C TVJ = 125C Characteristic Value typ. 1 1.5 1.6 min. 3 30 50 320 70 0.60 0.31 1600 140 0.96 tbd 100 1.8 5 max. 0.04 mA mA nA V V V ns ns ns ns mJ mJ pF nC K/W K/W +0,3 -0,3 Package style and outline Dimensions in mm (1mm = 0.0394") VCE = 25 V, VGE = 0 V, f= 1 MHz VCE = 480 V, VGE = 15 V, IC = 10A with heat transfer paste Chopper D Symbol VRRM IF25 IF80 Test Conditions TC = 25C; TC = 80C; 180 sine 180 sine Maximum Ratings 600 35 22 V A A Symbol IR VF IRM trr RthJC RthJS Module Test Conditions VR = VRRM, TVJ = 25C TVJ = 125C IF = 10A, TVJ = 25C TVJ = 125C Characteristic Value typ. 0.1 2.2 tbd tbd 1.15 tbd 3.2 2.4 max. 0.1 mA mA V V A s K/W K/W IF = 10A, -diF/dt = 400 A/s, TVJ = 125C VR = 400 V with heat transfer paste Symbol TVJ Tstg VISOL MD Test Conditions Maximum Ratings -40...+150 -40...+125 C C V~ Nm IISOL 1 mA, 50/60 Hz, t= 1 min Mounting torque (M4) 3000 1.5-1.8 Symbol dS, dA Weight Test Conditions pin to heatsink Characteristic Value typ. 16 min. 11.2 mm g POWERSEM GmbH, Walpersdorfer Str. 53 91126 D- Schwabach Phone: 09122 - 9764-0 Fax.: 09122 - 9764-20 2005 POWERSEM reserves the right to change limits, test conditions and dimensions |
Price & Availability of PSBI906 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |