View CGOF5S3_4560978.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. www.conwin.com
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS 14 PIN DIP 5.0V STRATUM 3 HCMOS OCXO
CW 0107 CGOF5S3 10.00M
ABSOLUTE MAXIMUM RATINGS
PARAMETER Storage Temperature Supply Voltage UNITS (Vcc) MINIMUM -40 -0.5 NOMINAL MAXIMUM 85 7.0 UNITS C Vdc
TABLE 1.0 NOTE
CGOF5S3
TABLE 2.0 NOTE 1 2
OPERATING SPECIFICATIONS
PARAMETER Center Frequency Frequency Calibration Frequency Stability Frequency Aging Daily Frequency Aging Lifetime (20 Years) Total Frequency Tolerance Operating Temperature Range Supply Voltage Supply Current Supply Current Steady State @25C Jitter (BW=10Hz to 20MHz) Allan Variance (1 second) SSB Phase Noise at 10Hz offset SSB Phase Noise at 10KHz offset Start Up Time: Oscillator Warm Up Time TDEV @ 1.0 Sec. TDEV @ 4.0 Sec. (Vcc) (Icc) (Icc) (Fo) -0.5 -0.1 -4.6 -20 4.75 MINIMUM NOMINAL 10.00 0.5 5.00 65 5.00E-10 -90 -145 0.1 20 3.0 4.6 70 5.25 300 3 10 5 1 2 MAXIMUM UNITS MHz ppm ppm ppb/day ppm ppm C Vdc mA mA ps rms dBc/Hz dBc/Hz mS Minutes nS nS
DESCRIPTION
3
The Connor-Winfield CGOF5S3 is a hermetically sealed 14 Pin DIP, 5.0V Oven Controlled Crystal Oscillator (OCXO) HCMOS / TTL Compatible. The CGOF5S3 is designed for higher stability Stratum 3 applications requiring low jitter and tight calibration.
4
FEATURES 5.0V OPERATION
TABLE 3.0
HCMOS OUTPUT CHARACTERISTICS
PARAMETER LOAD Voltage Current (High) (Low) (Voh) (Vol) (Ioh) (Ioh) MINIMUM 4.5 -4 45 NOMINAL 50 MAXIMUM 15 0.4 4 55 6 UNITS pf Vdc Vdc mA mA % nS
NOTE
LOW JITTER <3pS RMS TEMPERATURE STABILITY 0.1ppm OVERALL FREQUENCY TOLERANCE : 4.6ppm over Twenty Years. OVERALL AGING: 3.0ppm over Twenty Years
(High) (Low) Duty Cycle at 50% of Vcc Rise / Fall Time 10% to 90%
PACKAGE CHARACTERISTICS
Package
TABLE 4.0 14 pin DIP, hermetically sealed, grounded case, welded package
ORDERING INFORMATION
Notes: 1) Initial calibration @ 25C at time of shipment. 2) Frequency vs. temperature stability 3) Inclusive of calibration, operating temperature range, supply voltage change, load change, shock and vibration and aging over 20 years. 4) Measured @ 25C, within 5 minutes, the unit will be within +/-0.1ppm of its reference frequency, measured after 30 minutes of continuous operation at a stable 25 C
CGOF5S3
OCXO SERIES
- 10.00MHz
CENTER FREQUENCY
Specifications subject to change without notice. DATA SHEET #: Cx028 PAGE 1 OF 2 REV: 03 DATE: 7/12/02
aCopyright 2001 Connor-Winfield all rights reserved.
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. www.conwin.com
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
ENVIRONMENTAL CHARACTERISTICS Temperature Cycle: Per MIL-STD-883, Method 1010, Condition B. -55C to 125C, 20 cycles,10 minute dwell, 1minute transition. Gross Leak Test: Per MIL-STD-202, Method 112, Condition D. No bubbles in flourinert (FC-43) at 125C 5C for 20 seconds. SOLDERING Pin Solderability: Per MIL-STD-883, Method 200. 38 hour steam age prior to 254C 5C Solder pot dip, 95% Coverage. Resistance to Solder Heat: Per MIL-STD-202, Method 210, Condition C. Wave: Tops ide board-mount product, 260C 5C for 20 Seconds. MECHANICAL CHARACTERISTICS Vibration: Per MIL-STD-202, Method 204, Condition A. 10G's peak, 10Hz to 500Hz, 15m inute cycles 12 times each perpendi cular axis. Shock: Per MIL-STD-202, Method 213, Condition D. 500G's, 1ms, halfsine, 3 shocks per direction. Moisture Resistance: Per MIL-STD-202, Method 106. 95% RH @ 65C, 10 cycles 10C to 65C.
Specifications subject to change without notice. DATA SHEET #: Cx028 PAGE 2 OF 2 REV: 03 DATE: 7/12/02
aCopyright 2001 Connor-Winfield all rights reserved.

▲Up To Search▲

Price & Availability of CGOF5S3

	To Download CGOF5S3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .