 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. QR/P8 SERIES Ultra-small Rectangular Multi-electrode solderless Connectors for Rack and Panel Applications General QR/P8 Series is a series of small connectors for rack and panel application. This is a smaller-size version of the QR/P and QR/P1 Series, whose rectangular multielectrode plug in connectors for racks and panels have been well received in the market. Three different electrode numbers are available: 8,12 and 20. Wires are connected to the connectors without solder for easier connection and higher reliability. Features (1) The connector of this series is about 20% smaller in length than of the QR/P4 Series with the same number of electrodes. (2) Two pairs of electrodes on two sides have a pitch of 5.3 mm at the reinforcement of the housing guide pins, making the connector size smaller and enabling the connector to withstand high voltages. These electrodes therefore can be used for power supply. The terminals for signals have a pitch of 2 mm (3) Wires of AWG #20 - 28 can be connected with the two pairs of terminals on the two sides, while wires of AWG #24 - 28 can be connectord with the terminals for signals. (4) The pins give stable contact pressure because of their point contact with the receptacle blades, and have a larger allowance for the variation of connection length - a characteristic of plug-in connectors. (5) The guide pins and the housing body are moulded as one piece to achieve a smaller connector size. (6) Since the connectors are mounted on racks or panels with stepped screws, connection and disconnection can be done easily. (7) The connectors of this series have passed UL, CSA and TUV standards. Application PPC, Transmission and reception equipment, Data Communication, Vending Machine, Measuring Instruments, Automatic Equipment, Switchboards, etc. 04/2009 163 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Specification Material and Finish Ordering Information Connector Unit (1) (2) (3) (4) (5) Contact (1) (6) (7)(8)(9) (1) Series Name (2) No.of Pins (8, 12, 20) (3) Type of Housing P: Plug Housing S: Socket Housing (4) Type of Termination C: Criming (5) UL, CSA Approved Spec. (6) Type of Contact PC: Pin Contact SC: Socket Contact (7) Contact Type 1: Loose Contact 2: Chain Contact (8) Applicable wire 1: Thick Wire AWG #20 - #24 . . . For two holes at both ends 2: Thin Wire AWG #24 - #28 (9) Finish 1: Selective Gold plated over Nickel 164 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Housing Male Housing Female Housing Note: Determine the combinations with the panel so that the mating clearance between the P side and S side is 1mm or less. Contact Thick Wire (For Two Contact Holes at Male Contact Both Ends) Thick Wire (For Two Contact Holes at Female Contact Both Ends) 04/2009 165 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Contact Signal Male Contact Signal Female Contact Panel Cutout Mounting from rear surface of panel Mounting from rear surface of panel Mounting from front surface of panel Mounting from front surface of panel Tooling Hand Crimp Tool Auto Crimp Machine CM-105 CL901-0005-4 04/2009 166 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Contacts for thick wire Contact Configuration QR/P8-8P-C (01) QR/P8-12P-C (01) QR/P8-20P-C (01) 04/2009 167 |
Price & Availability of QRP8-PC-111
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |