View SFPFC401_4589598.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Datasheet
4.25 Gbps Fibre Channel SFP Transceiver
SFPFC401 Features
Designed for SFF-8472 compliance (SFP) 1.06 Gbps, 2.125 Gbps, and 4.25 Gbps Fibre Channel support Single-mode optics (Simplex LC) Dual fiber, bi-directional Class 1 laser: 1310 nm 10 km reach Digital Diagnostics (SFF-8724)
General Operations Parameter Supply Voltage Total Current Power Supply Noise Rejectiona Operating Temperature of SFP Caseb Storage Temperature Data Rate FC-400 Fibre Channel
a) 20 Hz to 155 MHz b) Maximum Relative Humidity is 85%, non-condensing
Symbol Vcc Icc PSR Top Tst DR
Min. 3.135 100 -5 -40 -
Max. 3.465 300 70 85 4250
Unit V mA mVp-p C C Mbps
Transmitter Specifications (Optical) Parameter Optical Power Average Launch Power Of Off Tx Eye Mask Optical Rise Timed Optical Fall Timed Mean Tx Wavelength: 1310 Spectral Width (20 dB) Dispersion Penalty (10 km)e Relative Intensity Noise Reflection Tolerancef
c) FC400 compliant d) 20% - 80% values e) Measured at BER of 1e-12, PRBS of 27-1, at eye center f ) 1 dB degradation of receiver sensitivity
Symbol
Pop Poff
Min -8.4 1260 -24
Max -1 -30 130 130 1360 1 1 -120 -
Unit dBm dBm ps ps nm nm dB dB/Hz dB
Fibre Channelc Compliant tr tf 20 dp RIN rp
1
Datasheet
Transmitter Specifications (Electical) Parameter Input Differential Impedence PECL Single Ended Data Input Swing TxFault_Fault TxFault_Normal TxDisable_Disable TxDisable_Enable Symbol Rin Vin,p-p Vfault Vnormal Vd Ven Min 80 250 2 Vee 2 Vee Max 120 1200 Vcc Vee+0.5 Vcc Vee+0.8 Unit mV V V V V
Receiver Specifications (Optical) Parameter Receive Powerg Damage Threshold for Receiver Mean Rx Wavelength: 1310 Maximum Reflectance of Receiver LOS Assert LOS De-assert LOS Hysteresis
g) at 4.25 Gbps, 1e-12 BER, PRBS 27-1
Symbol Rsens,low/high Pin,damage RX_r
-
Min -18 4 1260 -30 0.5
Max 0 1360 -27 -20 -
Unit dBm dBm nm dB dBm dBm dB
Receiver Specifications (Electrical) Parameter PECL Single Ended Data Output Swing Data Output Rise Time Data Output Fall Time Symbol Vout, p-p tr tf Min 185 Max 800 175 175 Unit mV ps ps
Timing and Electrical Parameter Tx Disable Negate Time Tx Disable Assert Time Time To Initialize, Including Reset of Tx Fault Tx Fault Assert Time Tx Disable To Reset LOS Assert Time LOS De-assert Time Serial ID Clock Rate RX_LOS Voltage (High) RX_LOS Voltage (Low) LOS Output Voltage-Fault LOS Output Voltage-Normal MOD_DEF (0:2)-High MOD_DEF (0:2)-Low Symbol t_on t_off t_init t_fault t_reset t_loss_on t_loss_off f_serial_clock VLOS fault VLOSnormal VH VL Min 10 2 2 2 Vee 2 Vee Max 1 10 300 100 100 100 100 Vcc 0.8 Vcc Vee+0.5 Vcc Vee+0.5 Unit s s ms s s s s KHz V V V V V V
2
Datasheet
Digital Diagnostics Parameter Temperature Voltage Bias Current TX Power RX Power Range -5 to 70 0 to Vcc 0 to 120 -14 to -8 -28.2 to -8 Accuracy 3 0.1 5 3 dB 3 dB Unit C V mA dBm dBm Calibration Internal Internal External External External Bit Value 1/256 C 100V Formula Tc(C)=Tad(16 bit signed twos complement)/256 V(Volts)=Vad(16 bit unsigned integer)*0.1 I(mA)=Islope*Iad(16 bit unsigned integer)+Ioffset TX_PWR(W)=TX_PWRslope*TX_PWRad(16 bit unsigned integer +TX_PWRoffset RX_PWR(W)=A0+A1*x+A2*x^2+A3*x^3+A4*x^4
Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Function VeeT
TX_FAULT TX_DISABLE MOD_DEF2 MOD_DEF1 MOD_DEF0 NC LOS
Notes TX GND Open Collector Internally Pulled High Serial Data Input Serial Clock Input Internally Grounded Not Connected Open Collector RX Ground RX Ground RX Ground RX Data Negative RX Data Positive RX GND RX Power TX Power TX GND TX Data Positive TX Data Negative TX GND
VeeR VeeR VeeR
RXDRXD+
VeeR VccR VccT VeeT TXD+ TXDVeeT
Ordering Information Model Description Data Rate (Mbps) Wavelength (nm)
Tx Rx
Connector Type
Bail Latch Color
Distance Range (km)
SFPFC401
1/2/4 Gbps Fibre Channel and 1 Gigabit Ethernet SFP Tranceiver.
1063 2125 4250
1310
1310
LC
Yellow
0 - 10
3
Datasheet
Outline Drawing
-
Units in mm(inch)
Regulatory Compliances
RoHS directive; China RoHS; California RoHS Law, USA and Canada UL listing; 21CFR 1040.10 and 1040.11; SFP MSA SFF-8074i; SFF-8472; Telecordia GR-468
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic descharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indeirect radiation.
MRV has more than 50 offices throughout the world. Addresses, phone numbers and fax numbers are listed at www.mrv.com. Please e-mail us at sales@mrv.com or call us for assistance.
MRV Los Angeles 20415 Nordhoff St. Chatsworth, CA 91311 800-338-5316 818-773-0900 MRV Boston 295 Foster St. Littleton, MA 01460 800-338-5316 978-952-4700 MRV International Business Park Moerfelden Waldeckerstrasse 13 64546 Moerfelden-Walldorf Germany Tel. (49) 6105/2070 Fax (49) 6105/207-100
All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders.
MRV-OP-SFPFC401-113008
3020010-001 Rev. A2 3020002-001 Rev. A1
Copyright (c)2008 MRV Communications, Inc. All Rights Reserved. Copyright (c)2007 MRV Communications, Inc. All Rights Reserved.

▲Up To Search▲

Price & Availability of SFPFC401

	To Download SFPFC401 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .