View XC6223E1219R-G_4600830.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

XC6223 Series
GENERAL DESCRIPTION
ETR0339-005
Built-in Inrush Current Protection, 300mA High Speed LDO Voltage Regulator
The XC6223 series is a high speed LDO regulator that features high accurate, low noise, high ripple rejection, low dropout and low power consumption. The series consists of a voltage reference, an error amplifier, a driver transistor, a current limiter, a phase compensation circuit, a thermal shutdown circuit and an inrush current protection circuit. The CE function enables the circuit to be in stand-by mode by inputting low level signal. In the stand-by mode, the series enables the electric charge at the output capacitor CL to be discharged via the internal switch, and as a result the VOUT pin quickly returns to the VSS level. The output stabilization capacitor CL is also compatible with low ESR ceramic capacitors. The output voltage is selectable in 0.05V increments within the range of 1.2V to 4.0V which fixed by laser trimming technologies. The over current protection circuit and the thermal shutdown circuit are built-in. These two protection circuits will operate when the output current reaches current limit level or the junction temperature reaches temperature limit level.
APPLICATIONS
Digital still cameras Cell phones Portable games Camera modules IC recorders Portable media players Bluetooth Wireless LAN Terrestrial digital TV tuners Cordless phones
FEATURES
Maximum Output Current Input Voltage Range Output Voltages : 300mA : 1.65.5V : 2.04.0V Accuracy 1% 1.21.95V Accuracy 20mV 0.05V increments : 200mVIOUT=300mA (VOUT=3.0V) : 100A : 0.1A : 80dBf=1kHz : Current Limit400mA Short Circuit Protection Over Heat Protection Inrush Current Protection : CIN =1.0F, CL=1.0F : Active High CL High Speed Discharge : USPQ-4B03 USP-4 SSOT-24 SOT-25 SOT-89-5 : EU RoHS Compliant, Pb Free
Dropout Voltage Low Power Consumption Stand-by Current High Ripple Rejection Protection Circuits
Low ESR Capacitors CE Function Small Packages
Environmentally Friendly
TYPICAL APPLICATION CIRCUIT
TYPICAL PERFORMANCE CHARACTERISTICS
tr = tf = 0.5s, Ta = 25, IOUT = 1150mA VIN = 3.5V, CIN = 1F (ceramic), CL = 1F (ceramic)
XC6223x251
2.60 Output Voltage: VOUT [V] 2.55 2.50 2.45 2.40 2.35 2.30 2.25 2.20 Time [20s/div] Output Current Output Voltage
400 300 250 200 150 100 50 0 Output Current Iout[mA] 350
1/36
XC6223 Series
PIN CONFIGURATION
*The dissipation pad for the USPQ-4B03,USP-4 packages should be solder-plated in reference mount pattern and metal masking so as to enhance mounting strength and heat release. If the pad needs to be connected to other pins, it should be connected to the VSS (No. 2) pin.
PIN ASSIGNMENT
PIN NUMBER USPQ-4B03 4 1 2 3 USP-4 4 1 2 3 SSOT-24 4 3 2 1 SOT-25 1 5 2 3 4 SOT-89-5 4 5 2 3 1 PIN NAME VIN VOUT VSS CE NC FUNCTIONS Power Input Output Ground ON/OFF Control No Connection
PIN FUNCTION ASSIGNMENT
CE Ethics Condition H L OPEN
IC Operation State ON/OFF Operation ON Operation OFF(Stand-by)
*
* Undefined state in XC6223 A/B/E/F. On the other hand, Operation OFF states in XC6223C/D/G/H because that an internal pull-down resister maintains the CE pin voltage to be low.
2/36
XC6223
Series
PRODUCT CLASSIFICATION
Ordering Information XC6223-(*1) DESIGNATOR ITEM SYMBOL Inrush Current Protection A B C D E F G H (The Recommended Type) 1240 1 B 9R-G GR-G NR-G MR-G PR-G NO NO NO NO YES YES YES YES DESCRIPTION CE Pull-Down Resistor NO NO YES (1M, TYP built-in) YES (1M, TYP built-in) NO NO YES (1M, TYP built-in) YES (1M, TYP built-in) CL Discharge NO YES NO YES NO YES NO YES
Type of Regulator (CE active high)

Output Voltage Output Voltage (2nd decimal place)
ex.) 2.80V =2, =8, =please see down below. ex.) 2.80V =1 ex.) 2.85V =B USPQ-4B03 (5,000/Reel) USP-4 (3,000/Reel) SSOT-24 (3,000/Reel) SOT-25 (3,000/Reel) SOT-89-5 (3,000/Reel)
-(*1)
Packages (Order Unit)
(*1)
The "-G" suffix indicates that the products are Halogen and Antimony free as well as being fully RoHS compliant.
3/36
XC6223 Series
BLOCK DIAGRAMS
VIN CFB CurrentLimit + Error Amp ON/OFF Control each circuit Voltage Reference VSS VOUT VIN CFB CurrentLimit + Error Amp ON/OFF Control each circuit Voltage Reference R1 Rdischg R2 CE VSS VOUT
R1
TSD
R2 CE
TSD
CE
XC6223Aseries
XC6223Bseries
VIN CFB CurrentLimit + Error Amp ON/OFF Control each circuit Voltage Reference
VOUT
VIN CFB CurrentLimit + Error Amp ON/OFF Control Voltage Reference R1 Rdischg R2 CE
VOUT
R1
TSD CE
TSD R2 CE
VSS
each circuit
VSS
XC6223Cseries
XC6223Dseries
VIN CFB CurrentLimit + Error Amp ON/OFF Control each circuit
Non Rush
VOUT
VIN CFB CurrentLimit + Error Amp ON/OFF Control each circuit
Non Rush
VOUT R1 Rdischg R2 CE VSS
R1
TSD
R2 CE VSS
TSD
CE
Voltage Reference
Voltage Reference
XC6223Eseries
XC6223Fseries
VIN CFB CurrentLimit + Error Amp ON/OFF Control each circuit
Non Rush
VOUT
VIN CFB CurrentLimit + Error Amp ON/OFF Control each circuit
Non Rush
VOUT R1 Rdischg R2 CE VSS
R1
TSD CE
TSD R2 CE
Voltage Reference VSS
Voltage Reference
XC6223Gseries
XC6223Hseries
4/36
XC6223
Series
ABSOLUTE MAXIMUM RATINGS
PARAMETER Input Voltage Output Current Output Voltage CE Input Voltage USPQ-4B03 USP-4 Power Dissipation SSOT-24 SOT-25 SOT-89-5 Operating Temperature Range Storage Temperature Range
(*1) : IOUTPd / (VIN-VOUT) (*2) : The power dissipation figure shown is PCB mounted. Please refer to page 2629 for details.
SYMBOL VIN IOUT VOUT VCE
RATINGS VSS-0.3+7.0 500 (*1) VSS-0.3VIN+0.3 VSS-0.3+7.0 100 (*2) 550 (PCB mounted) 120 (*2) 1000 (PCB mounted) 150 500 (PCB mounted) (*2) 250 (*2) 600 (PCB mounted) 500 1300 (PCB mounted) (*2) -40+85 -55+125
UNITS V mA V V
Pd
mW
Topr Tstg

5/36
XC6223 Series
ELECTRICAL CHARACTERISTICS
XC6223A/B/C/D/E/F/G/H Series
PARAMETER SYMBOL CONDITIONS VOUT(T)2.0V, VCE=VIN, IOUT=10mA VOUT(T)<2.0V, VCE=VIN, IOUT =10mA
(*3)
Ta=25
MIN. TYP. VOUT(T)
(*2)
MAX. VOUT(T)x1.01
(*2)
UNITS V
CIRCUITS
VOUT(T)x0.99
(*2)
Output Voltage
VOUT(E)
(*1)
VOUT(T)-20mV
(*2)
VOUT(T)
(*2)
VOUT(T)+20mV
(*2)
V mA mV mV
Maximum Output Current Load Regulation Dropout Voltage Supply Current Stand-by Current Line Regulation Input Voltage Output Voltage Temperature Characteristics
IOUTMAX VOUT Vdif
(*4)
VCE=VIN VCE=VIN, 0.1mAIOUT300mA VCE=VIN, IOUT=300mA VCE=VIN VCE=VSS VOUT(T)+0.5VVIN5.5 VCE=VIN, IOUT=50mA VCE=VIN, IOUT=10mA -40Ta85 VOUT(T)2.5V VIN=3.0VDC+0.5Vp-pAC VCE=VOUT(T)+1.0V IOUT=30mAf=1kHz VOUT(T)2.5V VIN=VOUT(T)+1.0 VDC+0.5Vp-pAC VCE=VOUT(T)+1.0V IOUT=30mAf=1kHz VCE=VIN VCE=VIN, VOUT=VSS VCE=VIN5.5V VCE=VIN=5.5V VCE=VSS VIN=5.5V, VOUT=2.0V, VCE=VSS VIN=VCE=5.5V Junction Temperature Junction Temperature Junction Temperature
300 -
25 E-1
45
ISS Istby VOUT/ (VINVOUT) VIN VOUT/ (TaVOUT)
1.6 -
100 0.01 0.01 100
220 0.4 0.1 5.5 -
A A %/V V ppm /
Ripple Rejection Rate
PSRR
-
80
-
dB
Current Limit Short Current CE High Level Voltage CE Low Level Voltage CE High Level Current (A/B/E/F Type) CE High Level Current (C/D/G/H Type) CE Low Level Current CL Discharge Resistance (Only B/D/F/H Type) Inrush Current (Only E/F/G/H Type) Thermal Shutdown Detect Temperature Thermal Shutdown Release Temperature Thermal Shutdown Hysteresis Width
ILIM ISHORT VCEH VCEL ICEH ICEH ICEL RDCHG Irush TTSD TTSR TTSD - TTSR
310 1.0 -0.1 3.0 -0.1 -
400 50 5.5 300 150 150 120 30
5.5 0.3 0.1 9.0 0.1 -
mA mA V V A A A mA

NOTE: *1: VOUT(E): Effective output voltage (i.e. the output voltage when "VOUT(T)+1.0V" is provided at the VIN pin while maintaining a certain IOUT value.) *2: VOUT(T): Nominal output voltage *3: The standard output voltage is specified in VOUTT20mV where VOUTT2.0V. *4: Vdif{VIN1{*5}VOUT1{*6}} (VIN11.6V) *5: VIN1=The input voltage when VOUT1 appears as input voltage is gradually decreased. *6: VOUT1=A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT {VOUT(T)+1.0V} is input *7: Unless otherwise stated regarding input voltage conditions, VIN=VOUT(T)1.0V.
6/36
XC6223
Series
ELECTRICAL CHARACTERISTICS (Continued)
Voltage Chart 1 SYMBOL
PARAMETER
E-0
E-1
NOMINAL OUTPUT VOLTAGE (V)
OUTPUT VOLTAGE (V)
DROPOUT VOLTAGE (mV)
VOUT(T) 1.20 1.25 1.30 1.35 1.40 1.45 1.50 1.55 1.60 1.65 1.70 1.75 1.80 1.85 1.90 1.95 2.00 2.05 2.10 2.15 2.20 2.25 2.30 2.35 2.40 2.45 2.50 2.55 2.60 2.65 2.70 2.75
VOUT(E) MIN 1.1800 1.2300 1.2800 1.3300 1.3800 1.4300 1.4800 1.5300 1.5800 1.6300 1.6800 1.7300 1.7800 1.8300 1.8800 1.9300 1.9800 2.0295 2.0790 2.1285 2.1780 2.2275 2.2770 2.3265 2.3760 2.4255 2.4750 2.5245 2.5740 2.6235 2.6730 2.7225 MAX 1.2200 1.2700 1.3200 1.3700 1.4200 1.4700 1.5200 1.5700 1.6200 1.6700 1.7200 1.7700 1.8200 1.8700 1.9200 1.9700 2.0200 2.0705 2.1210 2.1715 2.2220 2.2725 2.3230 2.3735 2.4240 2.4745 2.5250 2.5755 2.6260 2.6765 2.7270 2.7775 240 270 300 400 420 TYP 480 440
Vdif MAX 630 480
460
440
410
380
350
7/36
XC6223 Series
ELECTRICAL CHARACTERISTICS (Continued)
Voltage Chart2 SYMBOL
PARAMETER
E-0
E-1
NOMINAL OUTPUT VOLTAGE (V)
OUTPUT VOLTAGE (V)
DROPOUT VOLTAGE (mV)
VOUT(T) 2.80 2.85 2.90 2.95 3.00 3.05 3.10 3.15 3.20 3.25 3.30 3.35 3.40 3.45 3.50 3.55 3.60 3.65 3.70 3.75 3.80 3.85 3.90 3.95 4.00
VOUT(E) MIN. 2.7720 2.8215 2.8710 2.9205 2.9700 3.0195 3.0690 3.1185 3.1680 3.2175 3.2670 3.3165 3.3660 3.4155 3.4650 3.5145 3.5640 3.6135 3.6630 3.7125 3.7620 3.8115 3.8610 3.9105 3.9600 MAX. 2.8280 2.8785 2.9290 2.9795 3.0300 3.0805 3.1310 3.1815 3.2320 3.2825 3.3330 3.3835 3.4340 3.4845 3.5350 3.5855 3.6360 3.6865 3.7370 3.7875 3.8380 3.8885 3.9390 3.9895 4.0400 200 TYP.
Vdif MAX.
240
350
305
8/36
XC6223
Series
OPERATIONAL EXPLANATION
The voltage divided by resistors R1 & R2 is compared with the internal reference voltage by the error amplifier. The P-channel MOSFET which is connected to the VOUT pin is then driven by the subsequent output signal. The output voltage at the VOUT pin is controlled and stabilized by a system of negative feedback. The current limit circuit and short circuit protection operate in relation to the level of output current and heat dissipation. Further, the IC's internal circuitry can be shutdown via the CE pin signal.
The XC6223 series needs an output capacitor CL for phase compensation. In order to ensure the stable phase compensation, please place an output capacitor of 1.0F or bigger at the VOUT pin and VSS pin as close as possible. For a stable power input, please connect an input capacitor (CIN) of 1.0F between the VIN pin and the VSS pin.
The protection circuit operates as a combination of an output current limiter and fold-back short circuit protection. When load current reaches the current limit level, the output voltage drops. As a result, the load current starts to reduce with showing fold-back curve. The output current finally falls at the level of 50mA when the output pin is short-circuited.
The IC's internal circuitry can be shutdown via the signal from the CE pin. In shutdown mode, the XC6223B/D/F/H series enables the electric charge at the output capacitor (CL) to be discharged via the internal auto-discharge switch, and as a result the VOUT pin quickly returns to the VSS level. When the CE pin is open, the output voltage becomes undefined state in the XC6223A/B/E/F series because of a high active and no pull-down. On the other hand, the XC6223C/D/G/H series has a pull-down resistor at the CE pin inside, so that the CE pin input current flows.
The over heat protection circuit is built-in with the XC6223 series. When the junction temperature of the IC reaches the temperature limit level (150 TYP.), the thermal shutdown circuit operates and the driver transistor will be turned off. The IC resumes its operation when the thermal shutdown function is released as a result of the junction temperature drops to the release point.
The inrush current protection circuit is built in the XC6223 series. When the IC starts to operate, the protection circuit limits the inrush current from VIN to VOUT to charge CL capacitor. function is built in the XC6223E/F/G/H series.
This
9/36
XC6223 Series
NOTES ON USE
1 Where wiring impedance is high, operations may become unstable due to the noise and/or phase lag depending on output current. Please strengthen VIN and VSS wiring in particular. 2. The input capacitor CIN and the output capacitor CL should be placed to the as close as possible with a shorter wiring. 3. The IC is controlled with constant current start-up. Start-up sequence control is requested to draw a load current after rising up the output voltage. 4. For temporary, transitional voltage drop or voltage rising phenomenon, the IC is liable to malfunction should the ratings be exceeded. 5. Torex places an importance on improving our products and its reliability. However, by any possibility, we would request user fail-safe design and post-aging treatment on system or equipment.
10/36
XC6223
Series
TEST CIRCUITS
Circuit
Circuit
Circuit
11/36
XC6223 Series
TEST CIRCUITS (Continued)
Circuit
Circuit
12/36
XC6223
Series
TYPICAL PERFORMANCE CHARACTERISTICS
(1) Output Voltage vs. Output Current
XC6223x121
VIN = 2.2V CIN = 1.0F (ceramic)
XC6223x121
Ta = 25 CIN = 1.0F (ceramic)
1.4 Output Voltage: VOUT [V] Output Voltage: VOUT [V] 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 100 200 300 400 Output Current: IOUT [mA] 500
Ta=-40 Ta=25 Ta=85 85
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 100 200 300 400 Output Current: IOUT [mA] 500
VIN=1.6V VIN=2.2V VIN=2.7V VIN=5.5V
XC6223x181
VIN = 2.8V CIN = 1.0F (ceramic)
XC6223x181
Ta = 25 CIN = 1.0F (ceramic)
2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0
Ta=-40 Ta=25 Ta=85
2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0
Output Voltage: VOUT [V]
Output Voltage: VOUT [V]
VIN=1.9V VIN=2.3V VIN=2.8V VIN=3.3V VIN=5.5V
100 200 300 400 Output Current: IOUT [mA]
500
100 200 300 400 Output Current: IOUT [mA]
500
XC6223x251
VIN = 3.5V CIN = 1.0F (ceramic)
XC6223x251
Ta = 25 CIN = 1.0F (ceramic)
3.0 Output Voltage: VOUT [V] Output Voltage: VOUT [V] 2.5 2.0 1.5 1.0 0.5 0.0 0 100 200 300 400 Output Current: IOUT [mA] 500
Ta=-40 Ta=25 Ta=85
3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 100 200 300 400 Output Current: IOUT [mA] 500
VIN=2.6V VIN=3.0V VIN=3.5V VIN=4.0V VIN=5.5V
13/36
XC6223 Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(1) Output Voltage vs. Output Current (Continued)
XC6223x401
VIN = 5.0V CIN = 1.0F (ceramic)
XC6223x401
Ta = 25 CIN = 1.0F (ceramic)
4.5 Output Voltage: VOUT [V] 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 100 200 300 400 Output Current: IOUT [mA] 500
Ta=-40 Ta=25 Ta=85
4.5 4.0 Output Voltage: VOUT [V] 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 100 200 300 400 Output Current: IOUT [mA] 500
VIN=4.1V VIN=4.1V VIN=4.5V 25 VIN=5.0V VIN=5.0V VIN=5.5V 25
(2) Output Voltage vs. Input Voltage
XC6223x121
Ta = 25 CIN = 1F (ceramic), CL = 1F (ceramic)
XC6223x121
Ta = 25 CIN = 1F (ceramic), CL = 1F (ceramic)
1.4 Output Voltage: VOUT [V] Output Voltage: VOUT [V] 1.2 1.0 0.8
IOUT=1mA
1.212 1.208 1.204 1.200 1.196 1.192 1.188 2.5 2.0 2.5
IOUT=1mA IOUT=10mA IOUT=30mA IOUT=50mA
0.6 0.4 0.5
IOUT=10mA IOUT=30mA IOUT=50mA
1.0 1.5 2.0 Input Voltage: VIN [V]
3.0 3.5 4.0 4.5 Input Voltage: VIN [V]
5.0
5.5
XC6223x181
Ta = 25 CIN = 1F (ceramic), CL = 1F (ceramic)
XC6223x181
Ta = 25 CIN = 1F (ceramic), CL = 1F (ceramic)
2.0 Output Voltage: VOUT [V] 1.8 1.6 1.4 1.2 1.0 0.5
IOUT=1mA IOUT=10mA IOUT=30mA IOUT=50mA
1.820 Output Voltage: VOUT [V] 1.815 1.810 1.805 1.800 1.795 1.790 1.785 1.780 2.5 2.0 2.5
IOUT=1mA IOUT=10mA IOUT=30mA IOUT=50mA
1.0 1.5 2.0 Input Voltage: VIN [V]
3.0 3.5 4.0 4.5 5.0 Input Voltage: VIN [V]
5.5
14/36
XC6223
Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(2) Output Voltage vs. Input Voltage (Continued)
XC6223x251
Ta = 25 CIN = 1F (ceramic), CL = 1F (ceramic)
XC6223x251
Ta = 25 CIN = 1F (ceramic), CL = 1F (ceramic)
2.7 Output Voltage: VOUT [V] Output Voltage: VOUT [V] 2.5 2.3 2.1 1.9 1.7 1.5 2.0 2.5 3.0 Input Voltage: VIN [V] 3.5
IOUT=1mA IOUT=10mA IOUT=30mA IOUT=50mA
2.530 2.520 2.510 2.500 2.490 2.480 2.470 3.0 3.5
IOUT=1mA IOUT=10mA IOUT=30mA IOUT=50mA
4.0 4.5 5.0 Input Voltage: VIN [V]
5.5
XC6223x401
Ta = 25 CIN = 1F (ceramic), CL = 1F (ceramic)
XC6223x401
Ta = 25 CIN = 1F (ceramic), CL = 1F (ceramic)
4.2 Output Voltage: VOUT [V] 4.0 3.8 3.6 3.4 3.2 3.0 3.5 4.0 4.5 Input Voltage: VIN [V] 5.0
IOUT=1mA IOUT=10mA IOUT=30mA IOUT=50mA
4.040 Output Voltage: VOUT [V] 4.030 4.020 4.010 4.000 3.990 3.980 3.970 3.960 4.5 4.7 4.9 5.1 5.3 Input Voltage: VIN [V] 5.5
IOUT=1mA IOUT=10mA IOUT=30mA IOUT=50mA
(3) Dropout Voltage vs. Output Current
XC6223121
Ta = 25 CIN = 1F (ceramic), CL = 1F (ceramic)
XC6223181
Ta = 25 CIN = 1F (ceramic), CL = 1F (ceramic)
0.5 Dropout Voltage: Vdif [V] Dropout Voltage: Vdif [V] 0.4 0.3 0.2 0.1 0.0 0 50 100 150 200 250 Output Current: IOUT [mA] 300
Ta = -40 Ta = 25 Ta = 85
0.5
Ta = -40
0.4 0.3 0.2 0.1 0.0 0 50
Ta = 25 Ta = 85
100 150 200 250 Output Current: IOUT [mA]
300
15/36
XC6223 Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(3) Dropout Voltage vs. Output Current (Continued)
XC6223x251
Ta = 25 CIN = 1F (ceramic), CL = 1F (ceramic)
XC6223x401
Ta = 25 CIN = 1F (ceramic), CL = 1F (ceramic)
0.5 Dropout Voltage: Vdif [V] 0.4 0.3 0.2 0.1 0.0 0 50 100 150 200 250 Output Current: IOUT [mA] 300
Ta = -40 Ta = 25 Ta = 85
0.5
Ta = -40
Dropout Voltage: Vdif [V]
0.4 0.3 0.2 0.1 0.0 0 50
Ta = 25 Ta = 85
100 150 200 250 Output Current: IOUT [mA]
300
(4) Supply Current vs. Input Voltage
XC6223x121
160 Supply Current: ISS [A] 120 100 80 60 40 20 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 Input Voltage: VIN [V]
Ta = -40 Ta = 25 Ta = 85
XC6223x181
160 Supply Current: ISS [A] 140 120 100 80 60 40 20 0
Ta = -40 Ta = 25 Ta = 85
140
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 Input Voltage: VIN [V]
XC6223x251
160 Supply Current: ISS [A] Supply Current: ISS [A] 140 120 100 80 60 40 20 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 Input Voltage: VIN [V]
Ta = -40 Ta = 25 Ta = 85
XC6223x401
300 250 200 150 100 50 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 Input Voltage: VIN [V]
Ta = -40 Ta = 25 Ta = 85
16/36
XC6223
Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(5) Output Voltage vs. Ambient Temperature
XC6223x121
VIN = 2.2V CIN = 1F (ceramic), CL = 1F (ceramic)
XC6223x181
VIN = 2.8V CIN = 1F (ceramic), CL = 1F (ceramic)
1.22 Output Voltage: VOUT [V] Output Voltage: VOUT [V]
IOUT= 1mA
1.84 1.83 1.82 1.81 1.80 1.79 1.78 1.77 1.76 -50 -25 0 25 50 75 Ambient Temperature: Ta [] 100 -50 -25 0 25 50 75 Ambient Temperature: Ta [] 100
IOUT= 1mA IOUT=10mA IOUT=30mA IOUT=100mA IOUT=10mA IOUT=30mA IOUT=50mA
1.21 1.20 1.19 1.18
XC6223x251
VIN = 3.5V CIN = 1F (ceramic), CL = 1F (ceramic)
XC6223x401
VIN = 5.0V CIN = 1F (ceramic), CL = 1F (ceramic)
2.56 Output Voltage: VOUT [V] 2.54 2.52 2.50 2.48 2.46 2.44 -50 -25 0 25 50 75 Ambient Temperature: Ta [] 100
IOUT= 1mA IOUT=10mA IOUT=30mA IOUT=100mA
4.08 Output Voltage: VOUT [V] 4.06 4.04 4.02 4.00 3.98 3.96 3.94 3.92 -50 -25 0 25 50 75 Ambient Temperature: Ta [] 100
IOUT= 1mA IOUT=10mA IOUT=30mA IOUT=100mA
(6) Rising Response Time
XC6223x121
tr = 5s, Ta = 25,VIN = 02.2V CIN = 0.1F (ceramic), CL = 1F (ceramic)
XC6223x181
tr = 5s, Ta = 25,VIN = 02.8V CIN = 0.1F (ceramic), CL = 1F (ceramic)
6.0 Input Voltage: VIN [V] 3.0 0.0 -3.0 -6.0 -9.0 -12.0 Output Voltage
IOUT=0.1mA IOUT=30mA IOUT=100mA
2.4 Output Voltage: VOUT [V] Input Voltage: VIN [V] 2 Input Voltage 1.6 1.2 0.8 0.4 0
6.0 3.0 Input Voltage 0.0 -3.0 -6.0 -9.0 -12.0 Time [50s/div] Output Voltage
IOUT=0.1mA IOUT=30mA IOUT=100mA
3 2.5 2 1.5 1 0.5 0 Output Voltage: VOUT [V]
Time [50s/div]
17/36
XC6223 Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(6) Rising Response Time (Continued)
XC6223x251
tr = 5s, Ta = 25,VIN = 03.5V CIN = 0.1F (ceramic), CL = 1F (ceramic)
XC6223x401
tr = 5s, Ta = 25,VIN = 05.0V CIN = 0.1F (ceramic), CL = 1F (ceramic)
6.0 Input Voltage: VIN [V] 3.0 0.0 -3.0 -6.0 -9.0 -12.0 Time [50s/div] Output Voltage
IOUT=0.1mA IOUT=30mA IOUT=100mA
6.0 Output Voltage: VOUT [V] Input Voltage Input Voltage: VIN [V] 5.0 4.0 3.0 2.0 1.0 0.0
6.0 3.0 0.0 -3.0 -6.0 -9.0 -12.0 Output Voltage Input Voltage
6.0 5.0 4.0 3.0
IOUT=0.1mA IOUT=30mA IOUT=100mA
2.0 1.0 0.0
Time [50s/div]
(7) Input Transient Response
XC6223x121
tr = tf = 5s, Ta = 25, VIN = 2.2V3.2V CIN = 0.1F (ceramic), CL = 1.0F (ceramic)
XC6223x181
tr = tf = 5s, Ta = 25, VIN = 2.8V3.8V CIN = 0.1F (ceramic), CL = 1.0F (ceramic)
5.0 Input Voltage: VIN [V] 4.0 3.0 2.0 1.0 0.0 -1.0 Output Voltage Time [100s/div] Input Voltage
IOUT=0.1mA IOUT=30mA IOUT=100mA
1.24 Input Voltage: VIN [V] 1.23 1.22 1.21 1.2 1.19 1.18 Output Voltage: VOUT [V]
5.0 4.0 3.0 2.0 1.0 0.0 -1.0 Time [100s/div] Output Voltage Input Voltage
IOUT=0.1mA IOUT=30mA IOUT=100mA
1.85 1.84 1.83 1.82 1.81 1.8 1.79
XC6223x251
tr = tf = 5s, Ta = 25, VIN = 3.5V4.5V CIN = 0.1F (ceramic), CL = 1.0F (ceramic)
XC6223x401
tr = tf = 5s, Ta = 25, VIN = 4.5V5.5V CIN = 0.1F (ceramic), CL = 1.0F (ceramic)
6.0 Input Voltage: VIN [V] 5.0 4.0 3.0 2.0 1.0 0.0 Time [100s/div] Output Voltage Input Voltage
IOUT=0.1mA IOUT=30mA IOUT=100mA
2.54 Input Voltage: VIN [V] 2.53 2.52 2.51 2.5 2.49 2.48
6.0 5.0 4.0 3.0 2.0 1.0 0.0 Output Voltage Time [100s/div]
IOUT=10mA IOUT=30mA IOUT=100mA
4.04 Input Voltage 4.03 4.02 4.01 4 3.99 3.98
18/36
Output Voltage: VOUT [V]
XC6223
Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(8) Load Transient Response (tr=tf=0.5s)
tr = tf = 0.5s, Ta = 25, IOUT = 1150mA VIN = 2.2V, CIN = 1F (ceramic), CL = 1F (ceramic)
XC6223x121
tr = tf = 0.5s, Ta = 25, IOUT = 50100mA VIN = 2.2V, CIN = 1F (ceramic), CL = 1F (ceramic)
XC6223x121
1.30 Output Voltage: VOUT [V] 1.25 1.20 1.15 1.10 1.05 1.00 0.95 0.90 Time [20s/div] Output Current Output Voltage
400 Output Current Iout[mA] Output Voltage: VOUT [V] 350 300 250 200 150 100 50 0
1.22 1.21 1.20 1.19 1.18 1.17 1.16 1.15 1.14 Time [20s/div] Output Current Output Voltage
400 300 250 200 150 100 50 0 Output Current Iout[mA] Output Current Iout[mA] 400 Output Current Iout[mA] 350 300 Output Voltage 250 200 150 100 Output Current 50 0 Time [20s/div] 350
tr = tf = 0.5s, Ta = 25, IOUT = 1150mA VIN = 2.8V, CIN = 1F (ceramic), CL = 1F (ceramic)
XC6223x181
tr = tf = 0.5s, Ta = 25, IOUT = 50100mA VIN = 2.8V, CIN = 1F (ceramic), CL = 1F (ceramic)
XC6223x181
1.90 Output Voltage: VOUT [V] 1.85 1.80 1.75 1.70 1.65 1.60 1.55 1.50 Time [20s/div] Output Current Output Voltage
400 Output Current Iout[mA] 300 250 200 150 100 50 0 Output Voltage: VOUT [V] 350
1.82 1.81 1.80 1.79 1.78 1.77 1.76 1.75 1.74 Time [20s/div] Output Current Output Voltage
400 350 300 250 200 150 100 50 0
tr = tf = 0.5s, Ta = 25, IOUT = 1150mA VIN = 3.5V, CIN = 1F (ceramic), CL = 1F (ceramic)
XC6223x251
tr = tf = 0.5s, Ta = 25, IOUT = 50100mA VIN = 3.5V, CIN = 1F (ceramic), CL = 1F (ceramic)
XC6223x251
2.60 Output Voltage: VOUT [V] 2.55 2.50 2.45 2.40 2.35 2.30 2.25 2.20 Time [20s/div] Output Current Output Voltage
400 Output Current Iout[mA] Output Voltage: VOUT [V] 350 300 250 200 150 100 50 0
2.52 2.51 2.50 2.49 2.48 2.47 2.46 2.45 2.44
19/36
XC6223 Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(8) Load Transient Response (tr=tf=0.5s) (Continued)
XC6223x401
tr = tf = 0.5s, Ta = 25, IOUT = 1150mA VIN = 5.0V, CIN = 1F (ceramic), CL = 1F (ceramic)
XC6223x401
tr = tf = 0.5s, Ta = 25, IOUT =50100mA VIN = 5.0V, CIN = 1F (ceramic), CL = 1F (ceramic)
4.10 Output Voltage: VOUT [V] 4.05 4.00 3.95 3.90 3.85 3.80 3.75 3.70 Time [20s/div] Output Current Output Voltage
400 Output Current Iout[mA] 300 250 200 150 100 50 0 Output Voltage: VOUT [V] 350
4.02 4.01 4.00 3.99 3.98 3.97 3.96 3.95 3.94 Time [20s/div] Output Current Output Voltage
500 450 400 350 300 250 200 150 100 50 0
(8) Load Transient Response (tr=tf=5s) (Continued)
tr = tf = 5s, Ta = 25, IOUT = 1150mA VIN = 2.2V, CIN = 1F (ceramic), CL = 1F (ceramic)
XC6223x121
1.22 Output Voltage: VOUT [V] 1.21 1.20 1.19 1.18 1.17 1.16 1.15 1.14 Time [50s/div] Output Current Output Voltage
400 Output Current Iout[mA] Output Voltage: VOUT [V] 350 300 250 200 150 100 50 0
1.22 1.21 1.20 1.19 1.18 1.17 1.16 1.15 1.14
tr = tf = 5s, Ta = 25, IOUT = 50100mA VIN = 2.2V, CIN = 1F (ceramic), CL = 1F (ceramic)
XC6223x121
400 Output Current Iout[mA] Output Current Iout[mA] 350
Output Voltage
300 250 200 150
Output Current
100 50 0
Time [50s/div]
tr = tf = 5s, Ta = 25, IOUT = 1150mA VIN = 2.8V, CIN = 1F (ceramic), CL = 1F (ceramic)
XC6223x181
XC6223x181
400 Output Current Iout[mA] Output Voltage: VOUT [V] 350 300 1.82 1.81 1.80 1.79 1.78 1.77 1.76 1.75 1.74 Time [50s/div] Output Current Output Voltage
tr = tf = 5s, Ta = 25, IOUT = 50100mA VIN = 2.8V, CIN = 1F (ceramic), CL = 1F (ceramic)
1.82 Output Voltage: VOUT [V] 1.81 1.80 1.79 1.78 1.77 1.76 1.75 1.74 Time [50s/div] Output Current Output Voltage
400 350 300 250 200 150 100 50 0
250 200 150 100 50 0
20/36
Output Current Iout[mA]
XC6223
Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(8) Load Transient Response (tr=tf=5s) (Continued)
XC6223x251
2.52 Output Voltage: VOUT [V] 2.51 2.50 2.49 2.48 2.47 2.46 2.45 2.44 Time [50s/div] Output Current Output Voltage
tr = tf = 5s, Ta = 25, IOUT = 1150mA VIN = 3.5V, CIN = 1F (ceramic), CL = 1F (ceramic)
XC6223x251
400 Output Current Iout[mA] 300 250 200 150 100 50 0 Output Voltage: VOUT [V] 350
tr = tf = 5s, Ta = 25, IOUT = 50100mA VIN = 3.5V, CIN = 1F (ceramic), CL = 1F (ceramic)
2.52 2.51 2.50 2.49 2.48 2.47 2.46 2.45 2.44 Time [50s/div] Output Current Output Voltage
400 300 250 200 150 100 50 0 Output Current Iout[mA] 3.0 CE Input Voltage 2.5 2.0 1.5 Output Voltage
IOUT=0mA IOUT=30mA IOUT=100mA
350
XC6223x401
4.02 Output Voltage: VOUT [V] 4.01 4.00 3.99 3.98 3.97 3.96 3.95 3.94 Time [50s/div] Output Current Output Voltage
tr = tf = 5s, Ta = 25, IOUT = 1150mA VIN = 5.0V, CIN = 1F (ceramic), CL = 1F (ceramic)
XC6223x401
400 300 250 200 150 100 50 0 Output Current Iout[mA] Output Voltage: VOUT [V] 350
tr = tf = 5s, Ta = 25, IOUT = 50100mA VIN = 5.0V, CIN = 1F (ceramic), CL = 1F (ceramic)
4.02 4.01 4.00 3.99 3.98 3.97 3.96 3.95 3.94 Time [50s/div] Output Current Output Voltage
400 300 250 200 150 100 50 0 Output Current Iout[mA] 1.0 0.5 0.0 350
(9) CE Rising Response Time (A,B,C,D Type)
XC6223x121
VCE VIN = 2.2V, tr = 5s, Ta = 25 = 0VIN, CIN = CL = 1.0F (ceramic)
XC6223x181
VIN = 2.8V, tr = 5s, Ta = 25 VCE = 0VIN, CIN = CL = 1.0F (ceramic)
3.0 Input Voltage: VCE [V] 2.0 1.0 0.0 -1.0 -2.0 -3.0 Time [20s/div] Output Voltage
IOUT=0mA IOUT=30mA IOUT=100mA
3.0 Output Voltage: VOUT [V] Input Voltage: VCE [V] 2.5 CE Input Voltage 2.0 1.5 1.0 0.5 0.0
3.0 2.0 1.0 0.0 -1.0 -2.0 -3.0 Time [20s/div]
21/36
Output Voltage: VOUT [V]
XC6223 Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(9) CE Rising Response Time (A,B,C,D Type) (Continued)
XC6223x251
VCE VIN = 3.5V, tr = 5s, Ta = 25 = 0VIN, CIN = CL = 1.0F (ceramic)
XC6223x401
VIN = 5.0V, tr = 5s, Ta = 25 VCE = 0VIN, CIN = CL = 1.0F (ceramic)
6.0 Input Voltage: VCE [V] 4.0 2.0 0.0 -2.0 Output Voltage -4.0 -6.0 Time [20s/div]
IOUT=0mA IOUT=30mA IOUT=100mA
6.0 Output Voltage: VOUT [V] Input Voltage: VCE [V] 5.0 CE Input Voltage 4.0 3.0 2.0 1.0 0.0
6.0 4.0 2.0 0.0 -2.0 -4.0 -6.0 Time [20s/div] Output Voltage
IOUT=0mA IOUT=30mA IOUT=100mA
6.0 CE Input Voltage 5.0 4.0 3.0 2.0 1.0 0.0 Output Voltage: VOUT [V]
(9) CE Rising Response Time (E,F,G,H Type) (Continued)
XC6223x121
VCE VIN = 2.2V, tr = 5s, Ta = 25 = 0VIN, CIN = CL = 1.0F (ceramic)
XC6223x181
VIN = 2.8V, tr = 5s, Ta = 25 VCE = 0VIN, CIN = CL = 1.0F (ceramic)
3.0 Input Voltage: VCE [V] 2.0 1.0 0.0 -1.0 -2.0 -3.0 Output Voltage
IOUT=0mA IOUT=30mA IOUT=100mA
3 Output Voltage: VOUT [V] CE Input Voltage Input Voltage: VCE [V] 2.5 2 1.5 1 0.5 0
3.0 2.0 1.0 0.0 -1.0 -2.0 -3.0 Time [50s/div] Output Voltage
IOUT=0mA IOUT=30mA IOUT=100mA
3 CE Input Voltage 2.5 2 1.5 1 0.5 0 Output Voltage: VOUT [V] Output Voltage: VOUT [V]
Time [20s/div]
XC6223x251
VCE VIN = 3.5V, tr = 5s, Ta = 25 = 0VIN, CIN = CL = 1.0F (ceramic)
XC6223x401
VIN = 5.0V, tr = 5s, Ta = 25 VCE = 0VIN, CIN = CL = 1.0F (ceramic)
6.0 Input Voltage: VCE [V] 4.0 2.0 0.0 -2.0 -4.0 -6.0 Time [50s/div] Output Voltage
IOUT=0mA IOUT=30mA IOUT=100mA
6.0 Output Voltage: VOUT [V] Input Voltage: VCE [V] 5.0 CE Input Voltage 4.0 3.0 2.0 1.0 0.0
6.0 4.0 2.0 0.0 -2.0 -4.0 -6.0 Time [50s/div] Output Voltage
IOUT=0mA IOUT=30mA IOUT=100mA
6.0 CE Input Voltage 5.0 4.0 3.0 2.0 1.0 0.0
22/36
XC6223
Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(10) Inrush Current Response Time (E,F,G,H Type)
XC6223x121
VCE VIN = 2.2V, tr = 5s, Ta = 25 = 0VIN, CIN = CL = 1.0F (ceramic)
XC6223x181
VIN = 2.8V, tr = 5s, Ta = 25 VCE = 0VIN, CIN = CL = 1.0F (ceramic)
4.0 Input Voltage: VCE [V] 3.0 2.0 1.0 0.0 -1.0 -2.0 -3.0 -4.0 Time [20s/div] Rush Current Output Voltage CE Input Voltage
400 300 250 200 150 100 50 0 Input Voltage: VCE [V] 350 Rush Curren: IRUSH [mA]
4.0 3.0 2.0 1.0 0.0 -1.0 -2.0 -3.0 -4.0 Time [50s/div] Rush Current Output Voltage CE Input Voltage
400 350 300 250 200 150 100 50 0 Rush Curren: IRUSH [mA] Rush Curren: IRUSH [mA]
XC6223x251
VCE VIN = 3.5V, tr = 5s, Ta = 25 = 0VIN, CIN = CL = 1.0F (ceramic)
XC6223x401
VIN = 5.0V, tr = 5s, Ta = 25 VCE = 0VIN, CIN = CL = 1.0F (ceramic)
6.0 Input Voltage: VCE [V] 5.0 4.0 3.0 2.0 1.0 0.0 -1.0 -2.0 Time [50s/div] Rush Current Output Voltage CE Input Voltage
400 Rush Curren: IRUSH [mA] Input Voltage: VCE [V] 350 300 250 200 150 100 50 0
6.0 5.0 4.0 3.0 2.0 1.0 0.0 -1.0 -2.0
CE Input Voltage
400 350 300 Output Voltage 250 200 150
Rush Current
100 50 0
Time [50s/div]
23/36
XC6223 Series
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(11) Ripple Rejection Rate
XC6223x121
Ta = 25, VIN = 3.0VDC+0.5Vp-pAC CIN = 0.1F (ceramic), CL = 1F (ceramic)
XC6223x181
Ta = 25, VIN = 3.0VDC+0.5Vp-pAC CIN = 0.1F (ceramic), CL = 1F (ceramic)
Ripple Rejection Rate: RR [dB]
80 60 40 20 0 0.01
IOUT=0.1mA IOUT=1mA IOUT=30mA
Ripple Rejection Rate: RR [dB]
100
100 80 60 40
IOUT=0.1mA
20 0 0.01
IOUT=1mA IOUT=30mA
0.1 1 10 Ripple Frequency: f [kHz]
100
0.1 1 10 Ripple Frequency: f [kHz]
100
XC6223x251
Ta = 25, VIN = 3.5VDC+0.5Vp-pAC CIN = 0.1F (ceramic), CL = 1F (ceramic)
XC6223x331
Ta = 25, VIN = 4.3VDC+0.5Vp-pAC CIN = 0.1F (ceramic), CL = 1F (ceramic)
Ripple Rejection Rate: RR [dB]
80 60 40
IOUT=0.1mA
Ripple Rejection Rate: RR [dB]
100
100 80 60 40
IOUT=0.1mA
20 0 0.01
IOUT=10mA IOUT=30mA
20 0 0.01
IOUT=10mA IOUT=30mA
0.1 1 10 Ripple Frequency: f [kHz]
100
0.1 1 10 Ripple Frequency: f [kHz]
100
24/36
XC6223
Series
PACKAGING INFORMATION
*The package don't have filet because side of lead is no plating.
25/36
26/36
1.10.1 1.3MAX 2.80.2 1.6 +0.2 -0.1 0.2MIN
XC6223 Series
PACKAGING INFORMATION (Continued)
(0.4)
(0.1) 1.50.1
0.8 MIN
2.50.1 4.35 MAX
0.8 MIN
5
5
XC6223
Series
PACKAGING INFORMATION (Continued)
USPQ-4B03 Reference Pattern Layout USPQ-4B03 Reference Metal Mask Design
0.4
0.25
0.1
0.5
0.55 0.275 0.47 0.4 0.22
USP-4 Reference Metal Mask Design
0.4 2.0 0.4 0.7 1.9 0.3 0.3
0.25 0.25
1.30
USP-4 Reference Pattern Layout
0.1
27/36
1.05
XC6223 Series
PACKAGING INFORMATION (Continued)
USPQ-4B03 Power Dissipation Power dissipation data for the USPQ-4B03 is shown in this page. The value of power dissipation varies with the mount board conditions. Please use this data as one of reference data taken in the described condition.
1.
Measurement Condition (Reference data) Condition : Mount on a board Ambient : Natural convection Soldering : Lead (Pb) free Board Dimensions : 40 x 40 mm (1600mm2) Board Structure : 4 Copper Layers Each layer is connected to the package heat-sink and terminal pin No.1. Each layer has approximately 800mm2 copper area. Material : Glass Epoxy (FR-4) Thickness : 1.6 mm Through-hole : 4 x 0.8 Diameter
Evaluation Board (Unit: mm)
2. Power Dissipation vs. Ambient temperature
Board Mount (Tj max = 125)
Ambient Temperature 25 85
Power Dissipation PdmW 550 220
Thermal Resistance (/W) 181.82
Pd vs Ta Power Dissipation PdmW 600 500 400 300 200 100 0 25 45 65 85 Ampient Temperature Ta 105 125
28/36
XC6223
Series
PACKAGING INFORMATION (Continued)
USP-4 Power Dissipation Power dissipation data for the USP-4 is shown in this page. The value of power dissipation varies with the mount board conditions. Please use this data as one of reference data taken in the described condition.
1. Measurement Condition (Reference data) Condition: Mount on a board Ambient: Natural convection Soldering: Lead (Pb) free Board: Dimensions 40 x 40 mm (1600 mm2 in one side) Copper (Cu) traces occupy 50% of the board area In top and back faces Package heat-sink is tied to the copper traces Material: Glass Epoxy (FR-4) Thickness: 1.6 mm Through-hole: 4 x 0.8 Diameter
Evaluation Board (Unit: mm)
2. Power Dissipation vs. Ambient temperature Board Mount (Tj max = 125) Ambient Temperature 25 85 Power Dissipation PdmW 1000 400 Thermal Resistance (/W) 100.00
Pd vs Ta 1200 1000 800 600 400 200 0 25 45 65 85 Ambient Temperature Ta 105 125
29/36
XC6223 Series
PACKAGING INFORMATION (Continued)
SSOT-24 Power Dissipation
Power dissipation data for the SSOT-24 is shown in this page. The value of power dissipation varies with the mount board conditions. Please use this data as one of reference data taken in the described condition.
2. Measurement Condition (Reference data) Condition: Mount on a board Ambient: Natural convection Soldering: Lead (Pb) free Board: Dimensions 40 x 40 mm (1600 mm2 in one side) Copper (Cu) traces occupy 50% of the board area In top and back faces Package heat-sink is tied to the copper traces Material: Glass Epoxy (FR-4) Thickness: 1.6 mm Through-hole: 4 x 0.8 Diameter
Evaluation Board (Unit: mm)
2. Power Dissipation vs. Ambient temperature Board Mount (Tj max = 125) Ambient Temperature 25 85 Power Dissipation PdmW 500 200 Thermal Resistance (/W) 200.00
30/36
Power Dissipation Pd (mW)
XC6223
Series
PACKAGING INFORMATION (Continued)
SOT-25 Power Dissipation Power dissipation data for the SOT-25 is shown in this page. The value of power dissipation varies with the mount board conditions. Please use this data as one of reference data taken in the described condition. 1. Measurement Condition (Reference data) Condition: Mount on a board Ambient: Natural convection Soldering: Lead (Pb) free Board: Dimensions 40 x 40 mm (1600 mm2 in one side) Copper (Cu) traces occupy 50% of the board area In top and back faces Package heat-sink is tied to the copper traces (Board of SOT-26 is used.) Material: Glass Epoxy (FR-4) Thickness: 1.6 mm Through-hole: 4 x 0.8 Diameter
2. Power Dissipation vs. Ambient temperature Board Mount (Tj max = 125) Ambient Temperature 25 85 Power Dissipation PdmW 600 240
mm Evaluation Board (Unit: mm)
Thermal Resistance (/W) 166.67
Pd-Ta Pd vs. Ta 700 600 500 400 300 200 100 0 25 45 65 85 Ambient Temperature Ta () Ta 105 125
Power Dissipation Pd (mW) PdmW
31/36
XC6223 Series
PACKAGING INFORMATION (Continued)
SOT-89-5 Power Dissipation
Power dissipation data for the SOT-89-5 is shown in this page. The value of power dissipation varies with the mount board conditions. Please use this data as one of reference data taken in the described condition.
1. Measurement Condition (Reference data) Condition: Mount on a board Ambient: Natural convection Soldering: Lead (Pb) free Board: Dimensions 40 x 40 mm (1600 mm2 in one side) Copper (Cu) traces occupy 50% of the board area In top and back faces Package heat-sink is tied to the copper traces Material: Glass Epoxy (FR-4) Thickness: 1.6 mm Through-hole: 5 x 0.8 Diameter
Evaluation Board (Unit: mm)
2. Power Dissipation vs. Operating temperature
Board Mount (Tj max = 125)
Ambient Temperature 25 85
Power Dissipation PdmW 1300 520
Thermal Resistance (/W) 76.92
Pd-Ta Pd vs. Ta
Power Dissipation Pd (mW)
1400 1200 1000 800 600 400 200 0 25 45 65 85 105 125
Ambient Temperature Ta () Ta
32/36
PdmW
XC6223
Series
MARKING RULE
USPQ-4B03 represents type of regulator and output voltage range. MARK OUTPUT VOLTAGE 0.1V INCREMENTS VOLTAGE =4.0V VOLTAGE=1.23.9V 0 1 2 3 4 5 6 7 represents output voltage. VOLTAGE=1.23.95[V] MARK 0 1 2 3 4 5 6 7 8 9 A B C D E OUTPUT VOLTAGE (V) 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00 2.10 2.20 2.30 2.40 1.25 1.35 1.45 1.55 1.65 1.75 1.85 1.95 2.05 2.15 2.25 2.35 2.45 MARK F H K L M N P R S T U V X Y Z OUTPUT VOLTAGE (V) 2.50 2.60 2.70 2.80 2.90 3.00 3.10 3.20 3.30 3.40 3.50 3.60 3.70 3.80 3.90 2.55 2.65 2.75 2.85 2.95 3.05 3.15 3.25 3.35 3.45 3.55 3.65 3.75 3.85 3.95 VOLTAGE=4.0[V] PRODUCT SERIES XC6223A***** XC6223B***** XC6223C***** XC6223D***** XC6223E***** XC6223F***** XC6223G***** XC6223H***** MARK 0 1 2 3 4 5 6 7
4

3

OUTPUT VOLTAGE 0.05V INCREMENTS VOLTAGE =1.253.95V 8 9 A B C D E F
PRODUCT SERIES
H
XC6223A***** XC6223B***** XC6223C***** XC6223D***** XC6223E***** XC6223F***** XC6223G***** XC6223H*****
1
2
USPQ-4B03 (TOP VIEW)
represents production lot number. 01 to 09, 0A to 0Z, 11 to 9Z, A1 to A9, AA to Z9, ZA to ZZ in order. (G, I, J, O, Q, W excepted) *No character inversion used.
33/36
XC6223 Series
MARKING RULE (Continued)
SSOT-24 (with bar) represents type of regulator and output voltage range. MARK OUTPUT VOLTAGE 0.1V INCREMENTS VOLTAGE =1.22.9V VOLTAGE =3.04.0V B C D E K L M N 3 5 7 A F H P Z OUTPUT VOLTAGE 0.05V INCREMENTS VOLTAGE =1.253.95V 8 9 S T U V X Y PRODUCT SERIES

4
3
XC6223A***** XC6223B***** XC6223C***** XC6223D***** XC6223E***** XC6223F***** XC6223G***** XC6223H*****
1
2
SSOT-24(with bar) (TOP VIEW)
represents output voltage. MARK 0 1 2 3 4 5 6 7 8 9 A B C D E OUTPUT VOLTAGE (V) 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00 2.10 2.20 2.30 2.40 3.00 3.10 1.25 1.35 1.45 1.55 1.65 1.75 1.85 1.95 2.05 2.15 2.25 2.35 2.45 MARK F H K L M N P R S T U V X Y Z 2.50 2.60 2.70 2.80 2.90 OUTPUT VOLTAGE (V) 3.20 3.30 3.40 3.50 3.60 3.70 3.80 3.90 4.00 2.55 2.65 2.75 2.85 2.95 3.05 3.15 3.25 3.35 3.45 3.55 3.65 3.75 3.85 3.95
represents production lot number. 01 to 09, 0A to 0Z, 11 to 9Z, A1 to A9, AA to Z9, ZA to ZZ in order. (G, I, J, O, Q, W excepted) *No character inversion used.
34/36
XC6223
Series
MARKING RULE (Continued)
SOT-25, SOT-89-5,USP-4
5

4
represents product series MARK 9 PRODUCT SERIES XC6223******
1
2
3
SOT-25 (TOP VIEW)
represents type of regulator. MARK OUTPUT VOLTAGE 0.1V INCREMENTS VOLTAGE =1.23.9V VOLTAGE =4.0V C F L P T X 0 3 D H M R U Y 1 4 OUTPUT VOLTAGE 0.05V INCREMENTS VOLTAGE =1.253.95V E K N S V Z 2 5 PRODUCT SERIES
5 2 4
XC6223A***** XC6223B***** XC6223C***** XC6223D***** XC6223E***** XC6223F***** XC6223G***** XC6223H*****
1
2
3
SOT-89-5 (TOP VIEW)
represents output voltage. MARK 0 1 2 3 4 5 6 7 8 9 A B C D E OUTPUT VOLTAGE (V) 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00 2.10 2.20 2.30 2.40 4.00 1.25 1.35 1.45 1.55 1.65 1.75 1.85 1.95 2.05 2.15 2.25 2.35 2.45 MARK F H K L M N P R S T U V X Y Z OUTPUT VOLTAGE (V) 2.50 2.60 2.70 2.80 2.90 3.00 3.10 3.20 3.30 3.40 3.50 3.60 3.70 3.80 3.90 2.55 2.65 2.75 2.85 2.95 3.05 3.15 3.25 3.35 3.45 3.55 3.65 3.75 3.85 3.95 -
1 2
4 3
-
USP-4 (TOP VIEW)
represents production lot number. 01 to 09, 0A to 0Z, 11 to 9Z, A1 to A9, AA to Z9, ZA to ZZ in order. (G, I, J, O, Q, W excepted) *No character inversion used.
35/36
XC6223 Series
1. The products and product specifications contained herein are subject to change without notice to improve performance characteristics. Consult us, or our representatives before use, to confirm that the information in this datasheet is up to date. 2. We assume no responsibility for any infringement of patents, patent rights, or other rights arising from the use of any information and circuitry in this datasheet. 3. Please ensure suitable shipping controls (including fail-safe designs and aging protection) are in force for equipment employing products listed in this datasheet. 4. The products in this datasheet are not developed, designed, or approved for use with such equipment whose failure of malfunction can be reasonably expected to directly endanger the life of, or cause significant injury to, the user. (e.g. Atomic energy; aerospace; transport; combustion and associated safety equipment thereof.) 5. Please use the products listed in this datasheet within the specified ranges. Should you wish to use the products under conditions exceeding the specifications, please consult us or our representatives. 6. We assume no responsibility for damage or loss due to abnormal use. 7. All rights reserved. No part of this datasheet may be copied or reproduced without the prior permission of TOREX SEMICONDUCTOR LTD.
36/36

▲Up To Search▲

Price & Availability of XC6223E1219R-G

	To Download XC6223E1219R-G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .