 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CCPD-034 LVPECL Clock Oscillator 5x7mm SMD 3.3 Volts Model CCPD-034 is a 162.000MHz to 312.500MHz LVPECL Clock Oscillator operating at 3.3Volts. The oscillator utilizes a High Q Third Overtone crystal design providing very low Jitter and Phase Noise. No Sub-Harmonics are present in the Ouput Signal. 5x7mm SMD Applications: Digital Video SONET/SDH/DWDM Storage Area Networks Broadband Access Ethernet, Gigabit Ethernet Rev.: L Date: 05-13-08 CCPD-034 LVPECL Clock Oscillator 5x7mm SMD 3.3 Volts Frequency Range: Frequency Stability Options(ppm): Temperature Range: (standard) (Option M) (Option X) Storage: Input Voltage: Input Current: Output: Symmetry: Rise/Fall Time: 162.000MHz to 312.500MHz 20, 25, 50, 100 0C to +70C -20C to +70C -40C to +85C -55C to 120C 3.3V 0.3V 55mA Typ., 88mA Max Differential LVPECL 45/55% Max @ 50%Vdd 1nsec Max @ 20% to 80% Vdd Logic: Terminated to Vdd-2V into 50 ohms Temp. 0C to 85C "0"=1.490 Min., 1.680 Max "1"=2.275 Min., 2.420 Max Temp. -40C to 0C "0"=1.470 Min., 1.745 Max "1"=2.215 Min., 2.420 Max Disable Time 200nSec Max Start-up Time 1mSec Typ., 2mSec Max Phase Jitter: Phase Noise: Sub-harmonics: Aging: 12KHz~80MHz (See Plot Below) 0.5psec Typ., 1psec RMS Max None <3ppm 1st year, <2ppm every year thereafter Actual CCPD-034X-50-311.040MHz Plot Rev.: L Date: 05-13-08 CCPD-034 LVPECL Clock Oscillator 5x7mm SMD 3.3 Volts PART NUMBER GUIDE CCPD - 034 X - 50 - 311.040 #1 #2 #3 #4 #5 #1 Crystek PECL Oscillator. #2 Model 034 #3 Temp. Range (Blank=0/70C)(M=-20/70C)(X=-40/85C) #4 Stability: (see Table 1) #5 Frequency in MHz: 3 or 6 decimal places Blank(std) 50 25 20 Stability Indicator 100ppm 50ppm 25ppm 20ppm Standard Frequencies (50ppm, 0/70C) 200.000MHz 212.500MHz 250.000MHz 311.040MHz 312.500MHz Example: CCPD-034X-50-311.040 3.3V, -40/85C, 50ppm, 311.0400 MHz Mechanical: Table 1 Thermal Shock: MIL-STD-883, Method 1011, Condition A Moisture Resistance: MIL-STD-883, Method 1004 Environmental: TEMPERATURE Shock: Solderability: Vibration: Solvent Resistance: Resistance to Soldering Heat: MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 2007, Condition A MIL-STD-202, Method 215 MIL-STD-202, Method 210, Condition I or J RECOMMENDED REFLOW SOLDERING PROFILE 260C 217C 200C 150C Ramp-Up 3C/Sec Max. Critical Temperature Zone Ramp-Down 6C/Sec. Preheat 180 Secs. Max. 8 Minutes Max. 90 Secs. Max. 260C for 10 Secs. Max. NOTE: Reflow Profile with 240C peak also acceptable. 0.274 0.007 (6.96 0.18) Dimensions inches (mm) All dimensions are Max unless otherwise specified. Tri-State Function Open or N/C Pin #1 State Part Number Frequency DC Lot Code 0.193 0.007 (4.90 0.18) 0.075 (1.80) Output State Active Active High Z SUGGESTED PAD LAYOUT Denotes pad 1 0.055 Typ (1.40 Typ) 0.045 0.008 (1.14 0.20) #1 #6 #2 #5 #3 #4 0.071 (1.80) 1 2 3 via to ground 0.01F 6 5 4 0.154 (3.91) 0.050 (1.27) "1" level 0.7*Vcc Min "0" level 0.3*Vcc Max Pad 1 2 3 4 5 6 Connection N/C GND Out Comp. Out VCC Enable/Disable 0.100 (2.54) 0.200 (5.08) 0.100 (2.54) 0.200 (5.08) Rev.: L Date: 05-13-08 |
Price & Availability of CCPD-034
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |