 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only LED DISPLAY LPTL12157AFBK1 DATA SHEET Rev Description Original Spec By Phanomkorn J. SPEC. NO.: DATE REV. NO. : : DS30-2007-0115 12/JUNE/'07 - PART NO.: LPTL12157AFBK1 BNS-OD-C131/A4 PAGE: 0 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only FEATURES 1.2 inch ( 30.42 mm) MATRIX HEIGHT. LOW POWER REQUIREMENT. HIGH BRIGHTNESS & HIGH CONTRAST SINGLE PLANE, WIDE VIEWING ANGLE. SOLID STATE RELIABILITY. 5x7 ARRAY WITH X-Y SELECT. COMPATIBLE WITH USASCII AND EBCDIC CODES. STACKABLE HORIZONTALLY. CATEGORIZED FOR LUMINOUS INTENSITY. LEAD-FREE PACKAGE(ACCORDING TO ROHS) DESCRIPTION The LPTL12157AFBK1 is a 1.2 inch (30.42 mm) matrix height 5x7 dot matrix display. This device utilizes AlInGaP Red LED chips, which are made from AlInGaP on a GaAsP substrate, and has a black face and white dot. DEVICE PART NO. AlInGaP Red LPTL12157AFBK1 DESCRIPTION CATHODE COLUMN ANODE ROW PART NO.: LPTL12157AFBK1 BNS-OD-C131/A4 PAGE: 1 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PACKAGE DIMENSIONS NOTES: 1. All dimensions are in millimeters. Tolerances are 0.25 mm unless otherwise note. 2. Pin tip's shift tolerance is 0.4 mm. INTERNAL CIRCUIT DIAGRAM PART NO.: LPTL12157AFBK1 BNS-OD-C131/A4 PAGE: 2 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PIN CONNECTION No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 CONNECTION ANODE ROW ANODE ROW 5 7 CATHODE COLUMN 2 CATHODE COLUMN 3 ANODE ROW 4 CATHODE COLUMN 5 ANODE ROW ANODE ROW ANODE ROW 6 3 1 CATHODE COLUMN 4 CATHODE COLUMN 3 ANODE ROW 4 CATHODE COLUMN 1 ANODE ROW 2 PART NO.: LPTL12157AFBK1 BNS-OD-C131/A4 PAGE: 3 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only ABSOLUTE MAXIMUM RATING AT Ta=25oC PARAMETER Average Power Dissipation Per Dot Peak Forward Current Per Dot Average Forward Current Per Dot Derating Linear From 25 Per Dot Reverse Voltage Per Dot Operating Temperature Range Storage Temperature Range MAXIMUM RATING 70 90 25 0.33 5 -35 to +105 -35 to +105 UNIT mW mA mA mA/ V Soldering Conditions: 1/16 inch below seating plane for 3 seconds at 2600C or of temperature unit (during assembly) not over max. temperature rating above. ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25oC PARAMETER Average Luminous Intensity Peak Emission Wavelength Spectral Line Half-Width Dominant Wavelength Forward Voltage any Dot Reverse Current any Dot Luminous Intensity Matching Ratio (Similar Light Area) SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION IV p d VF IR IV-m 630 3300 632 20 624 2.05 2.6 100 2:1 ucd nm nm nm V A Ip=32mA 1/16Duty IF=20mA IF=20mA IF=20mA IF=20mA VR=5V Ip=32mA 1/16Duty Note: Luminous intensity is measured with a light sensor and filter combinaton that approximates the CIE (Commision Internationale De L'Eclairage) eye-response curve. PART NO.: LPTL12157AFBK1 BNS-OD-C131/A4 PAGE: 4 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted) PART NO.: LPTL12157AFBK1 BNS-OD-C131/A4 PAGE: 5 of 5 |
Price & Availability of LPTL12157AFBK1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |