 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PRODUCT DATA SHEET COMMON MODE CHOKE Features Small size Wideband suppression Low profile (<2.0mm) Surface Mount Flat top for pick & place Lead-free (Pb-free) P7500 Family Applications Noise suppression Common mode suppression USB lines IEEE 1394 DESCRIPTION The P7500 family is suitable for Common Mode suppression across a broad range of signal applications. Good Common Mode performance is achieved to beyond 500MHz. All chokes will handle DC currents of 300mA minimum. Components are available in two mechanical sizes similar to EIA 0805 and 1206. The P7500 family of components provides reliable lead-free terminations suitable for lead-free and conventional placement and reflow. P7500-2012 P7500-3216 ETALDOC 845/2 Page 1 of 4 July 2005 P7500 SPECIFICATIONS Electrical 2012 size (EIA 0805) Part Number P7500-2012-900MT P7500-2012-161MT P7500-2012-221MT Common mode Impedance (1) at 100MHz () 9025% 16025% 22025% DCR () Max 0.30 0.35 0.40 Rated Current IDC (mA) 400 350 300 (2) 3216 size (EIA 1206) Part Number P7500-3216-900MT P7500-3216-161MT P7500-3216-221MT Notes 1. 2. 3. 4. See fig. 1 and fig. 2 for typical impedance vs. frequency characteristics. Rated current, IDC, is the current at which the temperature rise is 40C (max). Operating temperature -40C to +85C. For non-standard inductance values, please contact Profec. Common mode Impedance (1) at 100MHz () 9025% 16025% 22025% DCR () Max 0.30 0.35 0.40 Rated Current IDC (mA) 400 350 300 (2) Voltage ratings (all variants) Rated voltage 50VDC Withstand Voltage 125VDC Insulation resistance 10M (min) ETALDOC 845/2 Page 2 of 4 July 2005 P7500 P7500-2012 impedance vs frequency characteristics Fig. 1 1000.0 COMMON MODE IMPEDANCE 100.0 IMPEDANCE (Ohm) 900 10.0 161 221 1.0 161 221 0.1 900 NORMAL MODE IMPEDANCE 1 10 FREQUENCY (MHz) 100 1000 10000 P7500-3216 impedance vs frequency characteristics Fig. 2 1000.0 COMMON MODE IMPEDANCE 100.0 IMPEDANCE (Ohm) 900 10.0 161 221 1.0 161 221 0.1 900 NORMAL MODE IMPEDANCE 1 10 FREQUENCY (MHz) 100 1000 10000 ETALDOC 845/2 Page 3 of 4 July 2005 P7500 CONSTRUCTION P7500-2012 dimensions Fig. 3 2.0 0.2 1.2 0.2 P7500-3216 dimensions Fig. 4 3.2 0.2 1.6 0.2 e3 0.45 typ e3 0.6 typ 0.4 typ 0.45 PCB P T AT ERN 0.4 0.75 1.1 PCB P T AT ERN Dimensions shown are in millimetres Terminal plating JESD97 Category = e3. Recommended reflow solder profile: 2 minutes @ 150-200C, 10 seconds @ 260C; time above 217C 60 seconds maximum. Note: these parts are ceramic bodied: avoid PCB flexure after mounting. ORDERING CODE P7500MT Tape and Reel Tolerance (25%) Impedance code (900, 161 or 221) Size (2012 or 3216) Type code ABSOLUTE MAXIMUM RATINGS Storage temperature Operating temperature Soldering temperature peak Reflow Hand -40C to +105C -40C to +85C 260C 10s 260C 3s Handle in accordance with IPC/JEDEC J-STD-033 procedure for components classified as IPC/JEDEC J-STD-020 Moisture Sensitivity Level 2. 0.6 1.05 1.6 0.4 0.6 typ 2.0 0.2 1.2 0.2 ISO 9001 FM 25326 ETAL Group Oy, Kuormatie 14, FIN-03101, Nummela Telephone: +358 (0)20 7500 330 Fax: +358 (0)20 7500 333 Website: www.etalgroup.com Email: etalgroup@egruppen.com ETALDOC 845/2 Page 4 of 4 July 2005 |
Price & Availability of P7500-2012-161MT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |